Peter Paul Electronics, Inc.
New Britain, CT 06050
Subminiature Solenoid Valve has in-line barbed fittings.
Available at either 3.5 or 0.9 W, SERIES 58 subminiature 2-way, normally closed valve measures 2 x 1 x 5/8 in. Max operating pressure is 300 psi, burst pressure is 1,500 psi, operating temperature range is -5 to 122Ã-
Read More »Explosion-Proof Valves feature corrosion resistance.
Explosion-proof Valves employ electroless nickel plating of coils to achieve corrosion resistance to NEMA 4X. Pressure ranges are from 0-3,000 psi, with temperature ranges from 0-221Ã-
Read More »Solenoid Valve Seals work in temperatures down to -60-
Designed for use in cold environments, FKM seal material provides bubble-tight sealing for solenoid valves. Proprietary seal formulation is suited for applications from northern pipelines to cryogenics and other extreme environments where maintenance and replacement are difficult.
Read More »Large Orifice Valve suits quick-fill applications.
Featuring standard aluminum body, High-Pressure, Large Orifice Valve employs Ã-½ in. NPT ports and produces up to 500 psi. Dual-stage plunger or poppet follower design with pressurized seal accommodates 2-stage pressurization.
Read More »Magnetic Latching Valve suits limited power applications.
With pressures to 500 psi, Magnetic Latching Valve is offered in 6-60 Vdc and draws approximately 7 W when energized. Encapsulated into single package, coil and rare earth magnet assembly come with either lead wire or male DIN style connection. Valve requires only 30 ms of power application to latch or unlatch. It is suited for tight spaces and remote areas where continuous power may not be...
Read More »Miniature Valves suit hazardous locations.
UL-approved, explosion proof Series 50 ELW and ELLW, with encapsulated coil, work as general-purpose valves for pneumatic and hydraulic conditions. Former operates on 1.8 W ac and dc, while latter operates on 0.5 W dc. Response times are from 4-16 msec and operating cycles can be intermittent or continuous at speeds up to 600 cpm. Valves meet hazardous location standards and have -0 to +140Ã-
Read More »EPDM Seals suit high pressure gas applications.
Ethylene Propylene Diene Monomer Valve Seals are specified to minimize in-service gas absorption and can be used in place of conventional rubber seals. They are suited for medical applications, aerospace projects, and similar uses where gas absorption can interfere with normal equipment operation.
Read More »High Pressure Valves operate in gas or liquid.
Series 20 Models H21 and H24 offer operating pressures to 2,000 psi and 1,000 psi respectively. Two-way, normally open Model H21 features .6 mm orifice with Cv factor of 0.10 and burst pressure to 5,000 psi. Three-way, normally open Model H24 features 1/32 in. orifice with Cv factor of 0.10 inlet and .024 exhaust. Both have DC operated coils and standard operating temperature of 0-104Ã-
Read More »Valves feature forged brass body.
Series 40 Valves are offered in 2-way and 3-way, normally closed configurations with exhaust to atmosphere and piped exhaust. Units may be used with air, inert gas, and liquid media, from vacuum to 300 psi, depending on orifice size and configuration. Valves operate in temperature range of 0 to 104Ã-
Read More »Solenoid Valves are water-resistant for submerged operations.
Series 15 or 50 valves feature liquid epoxy potted coil assembly and rugged housing covered with baked-on epoxy/polyester finish rated at 1000+ hours in 5% salt spray test. All internal parts are constructed of stainless steel and brass. Corrosion resistant materials are used for exposed parts. Standard version operates on 12 Vdc, single lead power connection. Dual power lead versions can be used...
Read More »Govenor Dannel Malloy visits Peter Paul Electronics
Peter Paul Electronics employees had the chance to meet Connecticut Gov. Dannel Malloy as he and Mayor Tim O'Brien of New Britain stopped by to greet employees with a handshake and a few words on June 1st, 2012. Peter Paul is receiving $2.75 million in grants. The state has agreed to lend $2.5 million to Peter Paul to buy equipment, upgrade machines and consolidate its coil operations. Up to $1.5...
Read More »New Logo, Website and Online Valve Training
NEW BRITAIN, CT, December 18th, 2011 - Peter Paul Electronics Co. Inc. (PPE) is proud to announce a new logo, website and online valve training program. PeterPaul has introduced new branding starting with our new logo which builds upon our strong history and commitment to continuous improvement. It incorporates an evolved double P, our traditional blue, quality and strength in stainless steel. It...
Read More »Peter Paul Electronics' Lisa Mangiafico in CT-ESGR Bosslift Program
New Britain, CT - Lisa Mangiafico, Market Research Analyst and grandaughter of the founders of Peter Paul Electronics, recently completed The Connecticut Committee for Employer Support of the Guard and Reserve's (CT-ESGR) Bosslift Program. Peter Paul is a Connecticut manufacturer of solenoid valves that participates in the CT-ESGR support program for Guard and Reserve employees. The BossLift...
Read More »Subminiature Solenoid Valve has in-line barbed fittings.
Available at either 3.5 or 0.9 W, SERIES 58 subminiature 2-way, normally closed valve measures 2 x 1 x 5/8 in. Max operating pressure is 300 psi, burst pressure is 1,500 psi, operating temperature range is -5 to 122Ã-
Read More »Explosion-Proof Valves feature corrosion resistance.
Explosion-proof Valves employ electroless nickel plating of coils to achieve corrosion resistance to NEMA 4X. Pressure ranges are from 0-3,000 psi, with temperature ranges from 0-221Ã-
Read More »Solenoid Valve Seals work in temperatures down to -60-
Designed for use in cold environments, FKM seal material provides bubble-tight sealing for solenoid valves. Proprietary seal formulation is suited for applications from northern pipelines to cryogenics and other extreme environments where maintenance and replacement are difficult.
Read More »Large Orifice Valve suits quick-fill applications.
Featuring standard aluminum body, High-Pressure, Large Orifice Valve employs Ã-½ in. NPT ports and produces up to 500 psi. Dual-stage plunger or poppet follower design with pressurized seal accommodates 2-stage pressurization.
Read More »Magnetic Latching Valve suits limited power applications.
With pressures to 500 psi, Magnetic Latching Valve is offered in 6-60 Vdc and draws approximately 7 W when energized. Encapsulated into single package, coil and rare earth magnet assembly come with either lead wire or male DIN style connection. Valve requires only 30 ms of power application to latch or unlatch. It is suited for tight spaces and remote areas where continuous power may not be...
Read More »Miniature Valves suit hazardous locations.
UL-approved, explosion proof Series 50 ELW and ELLW, with encapsulated coil, work as general-purpose valves for pneumatic and hydraulic conditions. Former operates on 1.8 W ac and dc, while latter operates on 0.5 W dc. Response times are from 4-16 msec and operating cycles can be intermittent or continuous at speeds up to 600 cpm. Valves meet hazardous location standards and have -0 to +140Ã-
Read More »EPDM Seals suit high pressure gas applications.
Ethylene Propylene Diene Monomer Valve Seals are specified to minimize in-service gas absorption and can be used in place of conventional rubber seals. They are suited for medical applications, aerospace projects, and similar uses where gas absorption can interfere with normal equipment operation.
Read More »