Royal Machine & Tool Corp.
Berlin, CT 06037
Share:
C Frame Fixtures enable complete machining.
Clamping on parts' bodies and not on flanges, C Frame Fixtures enable complete machining of large valve body flanges and weld connections. Units minimize number of operations required in production and can accommodate family of parts through use of interchangeable top clamps and nests.
Read More »
Modular Fixture holds irregular shaped parts.
Featuring Vee block design and high-tensile adjustable chain, Dual Modular-Style Fixture is adjustable for holding wide variety of different parts. Unit expands and contracts along X-Y-Z axes to suit largest and smallest parts by rearranging basic location of clamping and locating components. Fixture is suited for steam valve industry, which normally requires irregular shaped valves to be...
Read More »
Hydraulic Fixtures handle large and difficult parts.
Hydraulic Custom Fixtures hold multiple parts per side for first or secondary operations on horizontal machining centers. Parts are loaded and unloaded utilizing control valve for each operation. Depending on required system, multiple column configurations are available.
Read More »
Vertical Chucks range from 300-800 mm.
Quad Vertical Combination Chucks allow simultaneous holding of up to 8 parts, plus complete machining of part in single operation. Visually continuous spindle use is possible because chucks allows access to 3 sides of work piece, eliminating need for multiple set-ups. Master jaws can be set in either self-centering or compensating mode with use of center bracket for multiple loading of parts.
Read More »
Power Chucks grip ID of automotive brake rotors.
Three Jaw Drawdown, 9 7/8 in. diameter, wedge type power chucks are used on single or multi-spindle lathes. They provide tool clearance to permit machining of both pad surfaces simultaneously. Drawdown feature assures positive end location. Additional applications include gripping any part ID or OD that requires positive end location for thickness control or part stabilization.
Read More »
Index Chucks suit off-shore oil wells.
Suited for gripping castings or forged multi-faced parts with intersecting axes, 28 dia, 90Ã-
Read More »
Power Chucks grip thin wall tubing.
With 15 in. dia and 4.81 in. through-hole, 6 Jaw Power Chucks are configured with American Standard Acme Serrated Master Jaws, 3/8 in. jaw movement (3/4 in. on diameter), and 8 in. type A Mount with 1,500 rpm max recommended speed. Additional applications include gripping of thin wall components or castings that cannot withstand standard chucking methods without distortion.
Read More »
Work Positioner holds jet-engine compressor housings.
With 21 in. dia, 3-Jaw Work Positioner grips and locates jet engine compressor housings for CNC deburring operations. It provides 1.00 in. jaw movement (2.00 in. on diameter), while 2 sets of top jaws provide grip diameter range from 6-36 in. Additional applications include water jet cutting, material handling, palletizing, and depalletizing.
Read More »
Hydraulic Fixtures maximize capability of HMCs.
Hydraulic Custom Fixtures handle multiple parts per side for first or secondary operation on horizontal machining centers (HMCs). They can handle large and difficult parts resulting in reduction of set-up and production times. Depending on required system, multiple column configurations are available.
Read More »
Replacement Chucks fit Goss & DeLeeuw machines.
G-123-9, G-123-9.3, and G-123-12 direct replacement chucks are available for 3 models of Goss & DeLeeuw 123 Rotary Transfer Machine, while G 6x6, G 8x8 and G 11xl0 chucks are available for Model 4 Spindle Chucking Machine. Chucks are manufactured from high-alloy steel with all wearing surfaces hardened and ground.
Read More »
C Frame Fixtures enable complete machining.
Clamping on parts' bodies and not on flanges, C Frame Fixtures enable complete machining of large valve body flanges and weld connections. Units minimize number of operations required in production and can accommodate family of parts through use of interchangeable top clamps and nests.
Read More »
Modular Fixture holds irregular shaped parts.
Featuring Vee block design and high-tensile adjustable chain, Dual Modular-Style Fixture is adjustable for holding wide variety of different parts. Unit expands and contracts along X-Y-Z axes to suit largest and smallest parts by rearranging basic location of clamping and locating components. Fixture is suited for steam valve industry, which normally requires irregular shaped valves to be...
Read More »
Hydraulic Fixtures handle large and difficult parts.
Hydraulic Custom Fixtures hold multiple parts per side for first or secondary operations on horizontal machining centers. Parts are loaded and unloaded utilizing control valve for each operation. Depending on required system, multiple column configurations are available.
Read More »
Vertical Chucks range from 300-800 mm.
Quad Vertical Combination Chucks allow simultaneous holding of up to 8 parts, plus complete machining of part in single operation. Visually continuous spindle use is possible because chucks allows access to 3 sides of work piece, eliminating need for multiple set-ups. Master jaws can be set in either self-centering or compensating mode with use of center bracket for multiple loading of parts.
Read More »
Power Chucks grip ID of automotive brake rotors.
Three Jaw Drawdown, 9 7/8 in. diameter, wedge type power chucks are used on single or multi-spindle lathes. They provide tool clearance to permit machining of both pad surfaces simultaneously. Drawdown feature assures positive end location. Additional applications include gripping any part ID or OD that requires positive end location for thickness control or part stabilization.
Read More »
Index Chucks suit off-shore oil wells.
Suited for gripping castings or forged multi-faced parts with intersecting axes, 28 dia, 90Ã-
Read More »
Power Chucks grip thin wall tubing.
With 15 in. dia and 4.81 in. through-hole, 6 Jaw Power Chucks are configured with American Standard Acme Serrated Master Jaws, 3/8 in. jaw movement (3/4 in. on diameter), and 8 in. type A Mount with 1,500 rpm max recommended speed. Additional applications include gripping of thin wall components or castings that cannot withstand standard chucking methods without distortion.
Read More »
Work Positioner holds jet-engine compressor housings.
With 21 in. dia, 3-Jaw Work Positioner grips and locates jet engine compressor housings for CNC deburring operations. It provides 1.00 in. jaw movement (2.00 in. on diameter), while 2 sets of top jaws provide grip diameter range from 6-36 in. Additional applications include water jet cutting, material handling, palletizing, and depalletizing.
Read More »
Hydraulic Fixtures maximize capability of HMCs.
Hydraulic Custom Fixtures handle multiple parts per side for first or secondary operation on horizontal machining centers (HMCs). They can handle large and difficult parts resulting in reduction of set-up and production times. Depending on required system, multiple column configurations are available.
Read More »
Replacement Chucks fit Goss & DeLeeuw machines.
G-123-9, G-123-9.3, and G-123-12 direct replacement chucks are available for 3 models of Goss & DeLeeuw 123 Rotary Transfer Machine, while G 6x6, G 8x8 and G 11xl0 chucks are available for Model 4 Spindle Chucking Machine. Chucks are manufactured from high-alloy steel with all wearing surfaces hardened and ground.
Read More »