Company News

Mott Corporation

84 Spring Ln, Farmington, CT, 06032, US

  • 800-289-6688
Share Like Tweet Add Email

Latest New Product News from
Mott Corporation

Chemical Processing & Waste Management, Materials & Material Processing

Porous All-Metal Membrane comes in various form factors.

September 12, 2014

Supplied in 316L stainless steel or titanium, sterilizing grade all-metal membrane meets ASTM F838-05 for bacterial retention. Available form factors range from small discs or tubes for drug delivery applications to 10 in. cartridges for biotechnology and pharmaceutical processing. Product withstands aggressive chemistries and drug cocktails without potential for leaching, outgassing, or other adverse reactions. Filtration ratings range from 0.1 µm to coarser, including 0.2 µm. Read More

Fluid & Gas Flow Equipment

Ultra High Purity Gas Filters target semiconductor facilities.

July 2, 2013

With max operating pressure of 2,500 psig and max operating temperature of 842°F, GasShield® Defender DEF2000 provides 9 log reduction of particles (99.9999999%) down to 3 nm at flow rates over 2,000 slpm. Series is suitable for high flow bulk specialty and inert gas delivery systems. GasShield® Defender DEF4000, providing 9 log reduction of particles down to 3 nm at flow rates over 4,000 slpm, allows engineers to minimize footprint of bulk gas filter skids and gas panels. Read More

Chemical Processing & Waste Management, Fluid & Gas Flow Equipment

All-Metal Filters handle low vapor pressure gases.

June 5, 2013

Featuring all-metal 316LSS construction that can be heated to 450°C, FLP Series is suited for filtering low pressure, vapor phase dopants used in metal-organic vapor phase epitaxyor, advanced chemical vapor deposition, and atomic layer deposition applications. Open filter media enables passage of low pressure liquid source gas while having enough surface area to remove particles down to 0.003 µm, and is effective at preventing large particle agglomerations from migrating downstream.
Read More

Fluid & Gas Flow Equipment, Green & Clean, Materials & Material Processing

Porous Metals target alternative energy applications.

February 8, 2013

Available in sub-micron grade media up to media grade 100, Porous Metals can be processed with smooth, scratch-free surfaces that can be used as membrane support, catalyst support, gaseous diffusion layer, or as electrode in cell stacks or cell assemblies. Components are available in 300 and 400 series stainless steel, titanium, niobium, and many other metallurgies in form factors ranging from plates and large diameter discs to finished seamless elements and sheets as thin as .010 in. Read More

Services

Porous Components/Filters are offered in refractory metals.

January 9, 2013

Able to withstand demanding operating conditions, porous metal components and filters are available in various refractory metal alloys – zirconium, titanium, tungsten, molybdenum, and niobium – that exhibit chemical resistance, strength, and thermal stability. Porous components or entire filter assemblies can be designed to meet various flow control or filtration requirements to exacting tolerances and down to sub-micron particulate removal. Melting points range from 2,400°C to over 3,400°C. Read More

Chemical Processing & Waste Management, Fluid & Gas Flow Equipment

High Flow Filters supports transition to 450 mm wafer equipment.

June 28, 2012

Respectively accommodating 300 and 600 slpm flow rates in filter lengths of 3.31 and 5.0 in., Defender Series all-metal gas filter meets Semi requirements for 9 LRV (99.9999999% efficiency) down to 0.003 µm at recommended flow rate. Degree of pressure drop allows reduction of vacuum conductance, accelerating wafer chamber evacuation and fill. Supporting diverse applications in semiconductor industry, filters have operating pressures to 2,500 psig and operating temperatures to 450°C. Read More

Fluid & Gas Flow Equipment

Filter Media performs sterilizing grade filtration.

January 31, 2012

Available in 316L stainless steel or titanium, Sterilizing Grade Filter Media meets ASTM F838-05 for bacterial retention. Product is autoclavable, biocompatible, impervious to solvents, and compatible with most organic compounds and complex drug chemistries. Engineered for external use or for integration in implantable devices, media is suited for filters that prevent plugging of catheters, drug delivery devices, medical instrumentation, and gas flow restrictor devices. Read More

Chemical Processing & Waste Management, Fluid & Gas Flow Equipment

Porous Metal Filters support liquid and gas applications.

April 25, 2011

Featuring 316 stainless steel housing with Buna N seal, Hypulse® Hyline 7710 Series is equipped with 10 in. long, 316L stainless steel cartridges in either double open ended or 1 in. NPT connection configuration. Inline units support max operating pressure of 300 psi and include ¼ in. NPT housing drain, ¼ in. NPT gauge ports, and 1 in. FNPT line connections. Outside-In filter area is 0.54 ft², and each porous metal filter element is 100% leak tested to bubble point. Read More

Services

Chemical Passivation Service targets porous metal parts.

January 19, 2011

Utilizing Crest Ultrasonics Station, Mott provides complete chemical passivation of customers' parts in conformance with ASTM A967 Nitric 2 requirements. Automated passivation treatment removes free-iron and other contaminants from porous metal frits, discs, and cups up to 1 in. diameter. Supplemental processing is critical to customers in instrumentation, medical, pharmaceutical, and food and beverage industries as well others concerned with product cleanliness and surface condition. Read More

Chemical Processing & Waste Management, Fluid & Gas Flow Equipment

High Flow Gas Filters feature all-metal design.

October 15, 2009

Capable of accommodating flow rates of 300 and 650 sLpm in standard filter lengths of 3.31 or 5.0 in., respectively, High Flow Defender Series filters attain filtration efficiencies at 9 LRV (99.9999999% efficiency) down to 0.003 µm particles sizes. Porous metal filters are suited for use in semiconductor, flat panel display, and photovoltaic industries. Read More

Chemical Processing & Waste Management, Fluid & Gas Flow Equipment

Metal Filters suit high-flow, low-pressure drop applications.

May 11, 2009

Especially effective at preventing large particle agglomerations from migrating downstream, FLP Series accommodates high flow rates in very low pressure drop applications. Open media facilitates passage of low-pressure liquid source gas while having enough surface area to remove particles down to 0.003 µm. Constructed from 316LSS, filters can withstand elevated temperatures required to keep low-pressure gases and organometallics in vapor phase. Read More

Fluid & Gas Flow Equipment

Gasket Filters withstand extreme operating conditions.

December 22, 2005

Manufactured using 316L stainless steel porous metal media, GasShield® Gasket Filters are suited for filtration of gases such as carbon monoxide, ozone, and arsine. Units fit inside ¼ in. face seal fittings, handle flows from 1-20 slpm, and provide 0.003 µm filtration particle removal measured at most penetrating particle size of 0.08 µm. Filters are recommended for temperatures up to 450°C for inert gas and max differential pressure of 1,000 psid at 20°C. Read More

Chemical Processing & Waste Management, Fluid & Gas Flow Equipment

All-Metal Gasket Filter protects high-purity components.

January 7, 2004

GasShield Gasket Filter is compatible with inert and specialty gases and provides filtration in gas flows as low as 1 slpm. It protects particle-sensitive gas control components and withstands extreme operating conditions. Unit fits inside ¼ in. face seal fittings, porous element is 1 in. long, and it can be installed without design change to gas delivery system. All-metal filter, available in NanoMetal® Nickel Media, provides 0.003 µm filtration. Read More

Fluid & Gas Flow Equipment, Health, Medical and Dental Supplies & Equipment, Controls & Controllers

Flow Restrictors provide safe control of anesthesia.

March 14, 2003

Sintered metal flow restrictors are used in anesthesia delivery systems, maintaining minimum oxygen flow and non-hazardous gas mixtures of nitrous oxide, helium, and/or carbon dioxide. They have no moving parts and provide repeatable, close tolerance flow rates. Units are constructed of non-shedding compatible materials and are resistant to plugging and fouling. They are custom manufactured and calibrated to user's flow and pressure specifications. Read More

  • 1

Other Company News from
Mott Corporation