Avure Technologies, Inc.

Quick-Cycle HIPs Strengthen MIM/PIM Parts at Lower Cost
Machinery & Machining Tools

Quick-Cycle HIPs Strengthen MIM/PIM Parts at Lower Cost

FRANKLIN, Tennessee, USA - Today, tens of thousands of structural parts are produced by powder injection molding (PIM) technology. Many of these are quite small (Microminiature PIM) components of electronic, medical, telecommunications and computing devices. Because of their small load-bearing areas, they require particularly high levels of tensile strength and hardness. PIM compacts are...

Read More »
Quick-Cycle HIPs Strengthen MIM/PIM Parts at Lower Cost
Machinery & Machining Tools

Quick-Cycle HIPs Strengthen MIM/PIM Parts at Lower Cost

FRANKLIN, Tennessee, USA - Today, tens of thousands of structural parts are produced by powder injection molding (PIM) technology. Many of these are quite small (Microminiature PIM) components of electronic, medical, telecommunications and computing devices. Because of their small load-bearing areas, they require particularly high levels of tensile strength and hardness. PIM compacts are...

Read More »
Pasteurization System suits small/medium food processors.
Agricultural & Farming Products

Pasteurization System suits small/medium food processors.

Model QFP 100L-600 horizontal High Pressure Processing (HPP) system with 100 L capacity features operating pressures of 87,000 psi to preserve food's natural flavor, nutrients, and appearance without heat or chemical preservatives. Cycle time of 6.5 min enables system to process 28,000 lb of sliced meat in 20 hr workday. Measuring 27 x 19 ft, system has 12.1 x 55.9 in. chamber and intensifier...

Read More »
Pasteurization System suits small/medium food processors.
Agricultural & Farming Products

Pasteurization System suits small/medium food processors.

Model QFP 100L-600 horizontal High Pressure Processing (HPP) system with 100 L capacity features operating pressures of 87,000 psi to preserve food's natural flavor, nutrients, and appearance without heat or chemical preservatives. Cycle time of 6.5 min enables system to process 28,000 lb of sliced meat in 20 hr workday. Measuring 27 x 19 ft, system has 12.1 x 55.9 in. chamber and intensifier...

Read More »
Machinery & Machining Tools

Bodycote Responds to Demand Shift to Powder Metal from Large, Long Lead Time Forgings with Avure Hot Isostatic Press Purchase

KENT, Wash., June 11 -- Avure Technologies, Inc. is now constructing an extremely large Hot Isostatic Press (HIP) system, scheduled for installation at the Bodycote facility in Surahammar, Sweden in late 2009. The Surahammar system will be larger in size than Bodycote's two HIPs at their processing facility in Camas, Washington, USA. This order is further evidence of a growing demand for powder...

Read More »
Machinery & Machining Tools

Bodycote Responds to Demand Shift to Powder Metal from Large, Long Lead Time Forgings with Avure Hot Isostatic Press Purchase

KENT, Wash., June 11 -- Avure Technologies, Inc. is now constructing an extremely large Hot Isostatic Press (HIP) system, scheduled for installation at the Bodycote facility in Surahammar, Sweden in late 2009. The Surahammar system will be larger in size than Bodycote's two HIPs at their processing facility in Camas, Washington, USA. This order is further evidence of a growing demand for powder...

Read More »
Machinery & Machining Tools

PLANSEE Increases Densification Capacity with Avure Cold Isostatic Press

KENT, Washington, February 18 - Avure Technologies, Inc. announced today that its Vasteras Sweden operating unit has completed the installation and commissioning of an extremely large Cold Isostatic Press (CIP) at PLANSEE Metall GmbH. The CIP system is operating in PLANSEE's new facility in Reutte, Austria, which was formally inaugurated on October 11, 2007. This plant will support PLANSEE's...

Read More »
Machinery & Machining Tools

PLANSEE Increases Densification Capacity with Avure Cold Isostatic Press

KENT, Washington, February 18 - Avure Technologies, Inc. announced today that its Vasteras Sweden operating unit has completed the installation and commissioning of an extremely large Cold Isostatic Press (CIP) at PLANSEE Metall GmbH. The CIP system is operating in PLANSEE's new facility in Reutte, Austria, which was formally inaugurated on October 11, 2007. This plant will support PLANSEE's...

Read More »
Machinery & Machining Tools

Airbus in Bremen Achieves 1 Million Cycles on Flexform(TM) Fluid Cell Press

KENT, Wash., Nov. 8 - The German Airbus facility in Bremen has reached 1 million cycles on their Flexform high pressure fluid cell forming press. The equipment was originally installed in 1989. The press is equipped with two shuttling tables, each with a 1.2 x 3 meter forming tray, and operated with an automated tool pallet handling system enabling a total of 8 pallets to be loaded and unloaded...

Read More »
Machinery & Machining Tools

Airbus in Bremen Achieves 1 Million Cycles on Flexform(TM) Fluid Cell Press

KENT, Wash., Nov. 8 - The German Airbus facility in Bremen has reached 1 million cycles on their Flexform high pressure fluid cell forming press. The equipment was originally installed in 1989. The press is equipped with two shuttling tables, each with a 1.2 x 3 meter forming tray, and operated with an automated tool pallet handling system enabling a total of 8 pallets to be loaded and unloaded...

Read More »
Quick-Cycle HIPs Strengthen MIM/PIM Parts at Lower Cost
Machinery & Machining Tools

Quick-Cycle HIPs Strengthen MIM/PIM Parts at Lower Cost

FRANKLIN, Tennessee, USA - Today, tens of thousands of structural parts are produced by powder injection molding (PIM) technology. Many of these are quite small (Microminiature PIM) components of electronic, medical, telecommunications and computing devices. Because of their small load-bearing areas, they require particularly high levels of tensile strength and hardness. PIM compacts are...

Read More »
Quick-Cycle HIPs Strengthen MIM/PIM Parts at Lower Cost
Machinery & Machining Tools

Quick-Cycle HIPs Strengthen MIM/PIM Parts at Lower Cost

FRANKLIN, Tennessee, USA - Today, tens of thousands of structural parts are produced by powder injection molding (PIM) technology. Many of these are quite small (Microminiature PIM) components of electronic, medical, telecommunications and computing devices. Because of their small load-bearing areas, they require particularly high levels of tensile strength and hardness. PIM compacts are...

Read More »
Pasteurization System suits small/medium food processors.
Agricultural & Farming Products

Pasteurization System suits small/medium food processors.

Model QFP 100L-600 horizontal High Pressure Processing (HPP) system with 100 L capacity features operating pressures of 87,000 psi to preserve food's natural flavor, nutrients, and appearance without heat or chemical preservatives. Cycle time of 6.5 min enables system to process 28,000 lb of sliced meat in 20 hr workday. Measuring 27 x 19 ft, system has 12.1 x 55.9 in. chamber and intensifier...

Read More »
Pasteurization System suits small/medium food processors.
Agricultural & Farming Products

Pasteurization System suits small/medium food processors.

Model QFP 100L-600 horizontal High Pressure Processing (HPP) system with 100 L capacity features operating pressures of 87,000 psi to preserve food's natural flavor, nutrients, and appearance without heat or chemical preservatives. Cycle time of 6.5 min enables system to process 28,000 lb of sliced meat in 20 hr workday. Measuring 27 x 19 ft, system has 12.1 x 55.9 in. chamber and intensifier...

Read More »
Mergers & Acquisitions

Avure Technologies Acquired by Milestone Partners from the Gores Group

Sale Positions Company to Accelerate Execution of Its Successful Growth Strategy KENT, Wash., May 5 -- Avure Technologies, Inc. ( Avure" or the "Company"), the global leader in contained high pressure processing systems, announced today that it has closed a sale transaction with Milestone Partners ("Milestone"), a new investment partner, effective on April 27, 2009. The terms of the transaction...

Read More »
Mergers & Acquisitions

Avure Technologies Acquired by Milestone Partners from the Gores Group

Sale Positions Company to Accelerate Execution of Its Successful Growth Strategy KENT, Wash., May 5 -- Avure Technologies, Inc. ( Avure" or the "Company"), the global leader in contained high pressure processing systems, announced today that it has closed a sale transaction with Milestone Partners ("Milestone"), a new investment partner, effective on April 27, 2009. The terms of the transaction...

Read More »
Machinery & Machining Tools

Bodycote Responds to Demand Shift to Powder Metal from Large, Long Lead Time Forgings with Avure Hot Isostatic Press Purchase

KENT, Wash., June 11 -- Avure Technologies, Inc. is now constructing an extremely large Hot Isostatic Press (HIP) system, scheduled for installation at the Bodycote facility in Surahammar, Sweden in late 2009. The Surahammar system will be larger in size than Bodycote's two HIPs at their processing facility in Camas, Washington, USA. This order is further evidence of a growing demand for powder...

Read More »
Machinery & Machining Tools

Bodycote Responds to Demand Shift to Powder Metal from Large, Long Lead Time Forgings with Avure Hot Isostatic Press Purchase

KENT, Wash., June 11 -- Avure Technologies, Inc. is now constructing an extremely large Hot Isostatic Press (HIP) system, scheduled for installation at the Bodycote facility in Surahammar, Sweden in late 2009. The Surahammar system will be larger in size than Bodycote's two HIPs at their processing facility in Camas, Washington, USA. This order is further evidence of a growing demand for powder...

Read More »
Machinery & Machining Tools

PLANSEE Increases Densification Capacity with Avure Cold Isostatic Press

KENT, Washington, February 18 - Avure Technologies, Inc. announced today that its Vasteras Sweden operating unit has completed the installation and commissioning of an extremely large Cold Isostatic Press (CIP) at PLANSEE Metall GmbH. The CIP system is operating in PLANSEE's new facility in Reutte, Austria, which was formally inaugurated on October 11, 2007. This plant will support PLANSEE's...

Read More »
Machinery & Machining Tools

PLANSEE Increases Densification Capacity with Avure Cold Isostatic Press

KENT, Washington, February 18 - Avure Technologies, Inc. announced today that its Vasteras Sweden operating unit has completed the installation and commissioning of an extremely large Cold Isostatic Press (CIP) at PLANSEE Metall GmbH. The CIP system is operating in PLANSEE's new facility in Reutte, Austria, which was formally inaugurated on October 11, 2007. This plant will support PLANSEE's...

Read More »

All Topics