Company News

Phoenix Products Company Inc.

8711 West Port Avenue, Milwaukee, WI, 53224, USA

  • 800-438-1214

General Information:
Alison Pierce
Phone: 414-973-3300
E-mail this person

Latest New Product News from
Phoenix Products Company Inc.

display & presentation equipment, electrical equipment & systems, green & clean

LED Floodlight has marine-grade die cast aluminum housing.

November 20, 2013

Featuring die cast aluminum housing with powder coat finish, corrosion-resistant SturdiLED™ Series offers AC or DC driver with output options from 1,600–2,900 lm. Optical packages, 28° and 45°, accommodate various applications. ETL listed to UL 1598 and 1598A, fixture carries IP67 rating and features replaceable, impact-resistant, and UV-stable lens as well as conformal coated circuit board and fully potted driver. This 18–37 W floodlight can replace up to 100 W HID floodlights. Read More

display & presentation equipment, electrical equipment & systems

LED Floodlight Packages suit range of applications.

September 23, 2013

Available with optical packages ranging from wide flood to narrow spot optics, EcoMod™ Series includes 150 and 300 W models with respective outputs of 12,500 and 25,000 lm. EcoVent™ Technology extends fixture life by allowing heat, water, and debris to flow between modules, and construction includes marine-grade, extruded aluminum housing and modules, impact- and UV-resistant lenses, and fully potted drivers. Also, floodlight offers 360° rotation and 10° incremental indexed aiming. Read More

display & presentation equipment, electrical equipment & systems, electronic components & devices, vision systems

LED Task Light is designed for wet locations.

August 30, 2013

ETL/cETL certified to UL 1598-Wet Locations and CSA C22.2 No. 250.0-08, DLAW Series 16 W LED task light features low-copper content aluminum housing and stainless steel mounting bracket. Various lens and optic options accommodate such applications as dock lighting, task lighting, and indoor or outdoor wet environments. Pre-wired to 42, 60, or 90 in. arm, corrosion-resistant fixture provides instant-on lighting and supports 120 or 277 V voltages. Read More

display & presentation equipment, electrical equipment & systems

Explosionproof LED Fixtures can serve multiple applications.

June 4, 2013

SLXP, SLX, and DLX are ETL/cETL certified and use solid state lighting technology to provide instant-on light source. Designed to replace HID and INC floodlights, marine-grade aluminum fixtures use 39 W, feature LEDs with 50,000 hr rated life, and are available with flood (45°) and spot (28°) optics. SLXP is portable fixture, and SLX fixture is available with harp to mount to stationary object and aim as desired. DLX is delivered with hard-wired arm for explosion-proof task lighting. Read More

electrical equipment & systems

Linear LED Tube Light has lightweight, impact-resistant design.

May 24, 2013

Low-profile LEDLT Linear LED Tube Light is 17W, 1,250 lumen fixture with polycarbonate tubular construction. Featuring potted drivers and conformal coated LED boards, unit is protected against moisture intrusion, shock, and vibration. Product is IP66-rated and ETL/cETL certified to UL1598 and UL1598A. It is suited for industrial use in railcars, heavy equipment, walkways, marine environments, and exterior wet locations and provides option for daisy chaining. Read More

electrical equipment & systems

LED Floodlight uses recessed optics to minimize glare.

February 18, 2013

Designed to replace low to mid-level wattage HID floodlights, MidLev Series delivers up to 4,000 lumens. IP66-rated unit uses fully potted drivers and stranded wires in multi-driver system that allows fixture to remain partially illuminated in event of driver malfunction. Available in 12, 24, 36, 60, and 96 W, instant-on fixture comes in spot, medium, and wide flood packages. Marine-grade extruded aluminum housing acts as heat sink, while heavy-duty steel harp allows for 360° rotation. Read More

display & presentation equipment, electrical equipment & systems, green & clean

LED Floodlight combines durability, versatility, and 16 W draw.

February 12, 2013

Able to replace quartz halogen fixtures up to 500 W, IP67-rated ARIES Series draws 16 W and features marine-grade, low-copper content, cast aluminum and powder-coated housing that prevents corrosion throughout years of service. Light installs and aims using adjustable steel mounting bracket, and rated life and minimized maintenance requirements suit hard to reach applications. Options are available for voltage (AC and DC), optics, lens, plug/cord, and finish. Read More

display & presentation equipment, electrical equipment & systems, green & clean

SMT LED Luminaire replaces high-wattage HID floodlights.

March 2, 2012

Comprising 300 W Hi and 150 W Lo models respectively capable of producing up to 25,000 and 12,500 lm, instant-on ModCom(TM) Series provides years of service with minimal maintenance even in harsh environments. LEDs are rated for 50,000 hr, and conformal coated circuit boards, fully-potted premium-brand drivers, and stranded wires protect against water ingress and vibration damage. Optical packages include narrow, 10°, 24°, or 50° beam angles, and fixture will rotate 360° on its aiming axis. Read More

electrical equipment & systems, green & clean

Vaporproof LED Fixture is rated for hazardous applications.

May 16, 2011

While retaining design of jelly-jar fixtures, Metallic LED VP Series houses Bridgelux LED light source rated for 50,000 hr of illumination. Fixtures are UL 1598A-listed for marine, outdoor, and saltwater environments; UL 844-listed for hazardous locations; and ABS-listed as well as IP66 and LM79 tested and certified. Thermal paste in mounting array optimizes transfer of heat for dissipation, while driver and array are fully potted to protect against moisture, dust, and vibration. Read More

electrical equipment & systems, green & clean

LED Dock Light withstands impacts.

April 28, 2011

Providing light comparable to incandescent dock light with 150 W PAR38 lamp, FLEX LED docklite® operates on 16 W to illuminate truck trailer using LEDs with 12° beam angle. Flexible arm and hinged bracket allow fixture to swing out in event of impact. Vented to maintain longevity of LEDs, housing is made from high-temperature polymer and is designed to resist denting, deflection, and wear. Hardware and mounting bracket are made from zinc-plated steel to resist corrosion. Read More

Other Company News from
Phoenix Products Company Inc.