Company News

RBP Chemical Technology, Inc.

150 S. 118th St., P.O. Box 14069, Milwaukee, WI, 53214 0069, USA

  • 800-558-0747

Latest New Product News from
RBP Chemical Technology, Inc.

materials & material processing, green & clean

Web Printing Fountain Solutions come in concentrate form.

May 30, 2014

Designed for all size presses and speeds, Platinum Plus UC consists of ultra-concentrated version of pre-mix line. Water is removed, reducing overall consumption and shipping weight. Product can be pumped from original container directly to press in dosages from 1.25–1.5 oz/gal. With up to 60% residual water removed, Web Silicone Solutions are used on heatset web and coldset web presses. Products reduce friction and scuffing, and carry same biocides and anti-stat properties as pre-mix versions. Read More

cleaning products & equipment, green & clean

Press Wash meets all California EPA regulatory guidelines.

April 24, 2014

With VOC content of 85 g/L, CA 1171 Press Wash exceeds California EPA’s stringent regulations for roller and blanket washes, dictating that printers use products with VOC content of 100 g/L or less. Stable microemulsion of water and solvents aids in removal of water soluble contaminants. Product will dry effectively and mixes with water to leave no residue on rollers after cleaning. Suitable for all types of sheetfed press equipment, water miscible wash has low odor and high flashpoint of 118°F. Read More

materials & material processing

Defoamer minimizes foam generated in spray equipment.

May 17, 2005

ANTIFOAM AR-301 LF is a blended, non-silicone organic defoamer that is effective in acidic chemistry solutions such as tin strippers. It is dispersible in water and does not form oil slick. Product can be used in temperatures of 80-130°F. Read More

cleaning products & equipment

Single-Step Press Wash fights calcium buildup.

August 11, 2004

Used either by hand or in automatic washers, CAL SOLV calcium deglazing press wash removes calcium and ink contaminants on rollers and blankets in one application. It eliminates need for calcium deglazing supplemental products, and formula can be emulsified with water. Read More

cleaning products & equipment

Solder-Mask Remover breaks down mask for rinsing.

February 20, 2004

MAGNASTRIP 500 removes fully-cured, liquid photoimageable, acrylic-based masks from printed circuit boards. It works quickly, completely removing mask with no attack on circuitry or laminate. Product is effective on such masks as Coates Imagecure, Enthone DSR-3241, DSR-3242 Q, Vantico Probimer 77, Taiyo, and Electra LPI. Read More

materials & material processing

Aqueous Developer Concentrate suits feed and bleed systems.

February 5, 2004

One-part DR-503 CX is for both make-up and replenishment in feed and bleed systems. High-loading formula includes agents that ensure straight sidewalls, help clean foot of underdeveloped polymer, and keep equipment clean. Buffering agent helps maintain pH. Concentrate is also suited for developing aqueous photoimageable solder masks and other situations where carbonate is being used, eliminating need for multiple products. Read More

materials & material processing

CTP Fountain Concentrate provides continuous fast starts.

October 28, 2002

UNITROL® CTP I one-step, low VOC concentrate is designed for presses running at greater than 2,200 fpm. It contains agents that help eliminate feedback and flashing problems that can occur at high speeds on presses with duotrol or continuous dampening systems. Product contains agents to control ink and water balance and chelators to prevent calcium glazing, while also preventing toning and scumming problems. Read More

cleaning products & equipment

Cleaner/Degreaser suits metal finishing applications.

October 23, 2002

SILCLEAN NS low VOC, alkaline cleaner/degreaser contains no SARA Title III, Section 313 reportable chemicals or chlorinated solvents. It cleans and suspends dirt and oils from silicone wafers and metal substrates. Product contains corrosion inhibitors, degreasers, and wetting agents to emulsify oils. It is easy to rinse and leaves no film or residue. Non-hazardous, non-combustible cleaner can replace solvents for general cleaning of metal surfaces. Read More

materials & material processing

Developer/Replenisher prevents formation of scale.

October 11, 2002

One-step Type DR-502CX aqueous developer concentrate contains cleaning agents that prevent hard water deposits. It is formulated to develop fully aqueous dry film photoresists and photoimageable solder masks. DR-502CX provides alternative for solder mask developing applications where there is high consumption. Read More

materials & material processing

Neutral Concentrate provides clean, sharp print quality.

October 1, 2002

AQUA SERIES 960 PD single-step, low VOC, neutral fountain concentrate provides 4-color reproduction with bright, dense colors. Able to provide startups and restarts on newspaper presses, it is effective at low dosages and contains no SARA Title III, Section 313 reportable chemicals. Compatible with brush, spray, and conventional dampening systems, it helps control biological growth and provides ink and water balance. Read More

paints & coatings

Tin Etch Resist suits tank or flood systems.

September 18, 2002

TINCOTE 333 immersion tin etch resist replaces electroplated tin or tin/lead in Chemelex line of printed circuit chemistry. It produces flat, uniform deposit thickness, and may be replenished with tin and stabilizer components TINCOTE 333-S and TINCOTE 333-T. Read More

materials & material processing

Resist Stripper cleans tight spaces.

September 4, 2002

Type SR-301CM removes dry-film resist particles from spaces smaller than 2 mil and cleans stains from ferrous and non-ferrous metals in one step. It also removes over-cured photoresist and eliminates redeposition of resist particles. Stripper contains no glycol-ether solvents or SARA Title III, Section 313 reportable chemicals. It contains copper brighteners and anti-tarnish agents that produce uniform etching characteristics. Read More

adhesives & sealants, cleaning products & equipment

Cleaner/Adhesion Promoter removes oxidation.

August 28, 2002

CHEMBOND 300 single-step cleaner and adhesion promotor removes oxidation, light organic soil and chromate conversion coating in single step, eliminating need for microetch. It forms surface treatment that resists tarnishing and eliminates resist lock-on. Read More

materials & material processing

Concentrate fights paper stock problems on dampening systems.

January 17, 2002

UNITROL 924 PLUS one-step acidic fountain concentrate contains additional wetting agents to eliminate ink feedback, chelating agents to control calcium related problems and desensitizers to maintain optimum ink and water balance. It is buffered for pH stability and requires no alcohol or alcohol replacers. Read More

materials & material processing

Developer Replenisher is highly concentrated.

December 17, 2001

DR-501CR aqueous developer replenisher is a 1-part concentrate formulated for developing fully aqueous dry film photoresists and photoimageable solder masks. It is suitable for use in feed and bleed systems, requiring fewer additions than more diluted carbonate solutions. DR-501CR reduces volume of solution to waste treat. Read More

materials & material processing

Fountain Concentrate is used for sheet-fed presses.

November 30, 2001

Aqua Series 150 fountain concentrate for CTP plates on all types of sheet-fed presses minimizes attack on ink for brighter, truer colors. It contains ingredients that help control calcium related problems, and contains low VOCs (1.8 lb/gal. as determined by EPA Method 24) for safer environment. Read More

Other Company News from
RBP Chemical Technology, Inc.