Webtec Products Ltd
Saint Francis, WI 53235
Digital Multimeters troubleshoot hydraulic systems.
Available in 2 models with peak pressure rating of 8,700 psi and flow range of 105 or 210 gpm, DHM 3 Series can pinpoint faulty hydraulic components causing poor system performance. Units measure flow, pressure, peak pressure, temperature, horsepower, and volumetric efficiency. Housed in protective steel case, meters include loading valve with built-in over-pressure protection. Readings are...
Read More »
Digital Pressure Gauge captures pressure spikes.
Model HPM110 monitors oil, gas, water, hydraulic, pneumatic, and other pressure media in mobile, industrial, and process control equipment. Handheld unit can be installed when required using standard test point or left permanently connected in system. Measuring 3 in. dia, battery powered device simultaneously displays actual pressure, peak pressure, battery level, and engineering units selected,...
Read More »Portable Readout simultaneously displays 2 input variables.
Suited for taking diagnostic measurements, hand-held HPM420 series features 2-line display for simultaneous readings from 2 variable inputs. Automatic sensor recognition eliminates need to enter calibration data, and series also includes 4 or 6 input models with simultaneous measurement and data logging capability. Along with RS232 port, series features variable scanning rate down to 1,000...
Read More »
Hydraulic Multimeters offer flow ranges of 100 or 200 gpm.
Series DHM provides digital readout of pressure, peak pressure, volumetric efficiency, and hydraulic horsepower in addition to flow rate and fluid temperature. Two models are offered with peak pressure to 9,000 psi and temperature to 250Ã-
Read More »
Temperature Sensor has built-in signal conditioning.
Series TP200 Temperature Sensor provides 0-5 Vdc or 4-20 mA linear analog output. Simple 2- or 3-wire hook-up eliminates problems associated with cold junction compensation, curve fitting, and typical thermocouple limitations. Measuring 3.9 in. long by 0.86 in. in diameter, with weight of only 10 oz, sensor is available with #4 SAE, NPT, or BSP ports. It offers temperature range of 0-150Ã-
Read More »
Hydraulic Tester offers reverse flow capability to 50 gpm.
With working pressure to 6,000 psi, Series RFIK provides safe in-line testing of mobile or industrial hydraulic circuits. Reverse flow feature allows machine to be fully cycled during troubleshooting and prevents cylinder lock-up and pressure intensification. Flow rate is displayed on 2.5 in. dial, which imparts rate of change indication and accuracy better than 4% FSD. Housed in steel case, kit...
Read More »
Turbine Flow Meters feature linear analog output.
Available with US or metric ports, Series CT provides 4-20 mA or 0-5 Vdc output. Units measure flow and optionally simultaneous pressure and temperature signals on mobile or industrial hydraulic systems. Four O-ring port sizes from No. 8-24 SAE cover flow ranges from 7-200 gpm at working pressures to 7,000 psi and operating temperature to 250Ã-
Read More »
Hydraulic DAQ System corrects for viscosity.
C1000 Hydraulic Data Acquisition System has ViscoCorrect(TM) automatic viscosity correction. It is suitable for fluid power applications such as repair/rebuild testing, product development, and new product testing. System can measure flow, speed, pressure, temperature, torque, and other analog inputs, record up to 2000 readings in 1 sec, print test reports and graphs, and provide traceable...
Read More »Covid-19 Statement of impact on supply chain
As of 26/03/2020, Webtec’s UK HO, sales and manufacturing site and Webtec’s sales offices in France and Germany all remain open. All products are available and our UK service centre remains open. Government guidance Webtec is carefully following the UK Guidance for employers and businesses on coronavirus (COVID-19) as well similar guidance issued by the French and German governments. Safety...
Read More »
Digital Multimeters troubleshoot hydraulic systems.
Available in 2 models with peak pressure rating of 8,700 psi and flow range of 105 or 210 gpm, DHM 3 Series can pinpoint faulty hydraulic components causing poor system performance. Units measure flow, pressure, peak pressure, temperature, horsepower, and volumetric efficiency. Housed in protective steel case, meters include loading valve with built-in over-pressure protection. Readings are...
Read More »
Digital Pressure Gauge captures pressure spikes.
Model HPM110 monitors oil, gas, water, hydraulic, pneumatic, and other pressure media in mobile, industrial, and process control equipment. Handheld unit can be installed when required using standard test point or left permanently connected in system. Measuring 3 in. dia, battery powered device simultaneously displays actual pressure, peak pressure, battery level, and engineering units selected,...
Read More »Portable Readout simultaneously displays 2 input variables.
Suited for taking diagnostic measurements, hand-held HPM420 series features 2-line display for simultaneous readings from 2 variable inputs. Automatic sensor recognition eliminates need to enter calibration data, and series also includes 4 or 6 input models with simultaneous measurement and data logging capability. Along with RS232 port, series features variable scanning rate down to 1,000...
Read More »
Hydraulic Multimeters offer flow ranges of 100 or 200 gpm.
Series DHM provides digital readout of pressure, peak pressure, volumetric efficiency, and hydraulic horsepower in addition to flow rate and fluid temperature. Two models are offered with peak pressure to 9,000 psi and temperature to 250Ã-
Read More »
Temperature Sensor has built-in signal conditioning.
Series TP200 Temperature Sensor provides 0-5 Vdc or 4-20 mA linear analog output. Simple 2- or 3-wire hook-up eliminates problems associated with cold junction compensation, curve fitting, and typical thermocouple limitations. Measuring 3.9 in. long by 0.86 in. in diameter, with weight of only 10 oz, sensor is available with #4 SAE, NPT, or BSP ports. It offers temperature range of 0-150Ã-
Read More »
Hydraulic Tester offers reverse flow capability to 50 gpm.
With working pressure to 6,000 psi, Series RFIK provides safe in-line testing of mobile or industrial hydraulic circuits. Reverse flow feature allows machine to be fully cycled during troubleshooting and prevents cylinder lock-up and pressure intensification. Flow rate is displayed on 2.5 in. dial, which imparts rate of change indication and accuracy better than 4% FSD. Housed in steel case, kit...
Read More »
Turbine Flow Meters feature linear analog output.
Available with US or metric ports, Series CT provides 4-20 mA or 0-5 Vdc output. Units measure flow and optionally simultaneous pressure and temperature signals on mobile or industrial hydraulic systems. Four O-ring port sizes from No. 8-24 SAE cover flow ranges from 7-200 gpm at working pressures to 7,000 psi and operating temperature to 250Ã-
Read More »
Hydraulic DAQ System corrects for viscosity.
C1000 Hydraulic Data Acquisition System has ViscoCorrect(TM) automatic viscosity correction. It is suitable for fluid power applications such as repair/rebuild testing, product development, and new product testing. System can measure flow, speed, pressure, temperature, torque, and other analog inputs, record up to 2000 readings in 1 sec, print test reports and graphs, and provide traceable...
Read More »