Cooper Power Systems
Waukesha, WI 53188
Share:
Evolution of Cooper Power Systems Less-Flammable Transformer Fluids
Waukesha, WI, July 25, 2005 - For the past 30-plus years, Cooper Power Systems has marketed transformer fluids that outperform traditional petroleum-based mineral oils, particularly in the areas of fire safety and environmental compliance. The first entry into the market was R-TempÃ-® fluid in 1975. R-Temp fluid has significantly higher flash and fire points than traditional petroleum-based...
Read More »Modular Substations offer solution for custom needs.
Able to reduce on-site field installation time by up to 75%, pad-mounted modular substations are suited for sites with limited time and manpower. Components and equipment are pre-assembled on structural base and shipped ready for installation and energization. With aesthetically pleasing low profile, transformers are suited for urban and remote locations, including residential, industrial, and...
Read More »Voltage Regulator/Tap Changer enables preventive maintenance.
Voltage Regulator Control, Model CL-6A and Quik-Drive Tap Changer System allow utilities to automatically peform predictive maintenance on voltage regulators. Model CL-6A includes flash card port for programming and data retrieval, backlit display, and user-selectable menus. Metering-PLUS(TM) functionality groups and displays associated parameters on one screen. Tap changer provides 32 steps in 9...
Read More »
Vacuum Switchgear installs in any position.
VACpacÃ-® switchgear features non-combustible insulating medium, SF6 gas, and can be used indoors or outdoors. It fits through manholes and vault access openings, and mounts on walls, floors, or ceilings. VACpac suits system applications up to 35 kV. It can switch or sectionalize load, loop underground systems, perform source transfers, and provide tap overcurrent protection. Capacitor...
Read More »
Reclosers offer vacuum interruption and DA capabilities.
Kyle-® PWE and PWVE pad-mounted, 3-phase, automatic circuit reclosers provide overcurrent protection for distribution systems that use underground cable. Offered with microprocessor controls, products suit 15 and 27 kV systems that include overhead and underground construction on one feeder. PWE types protect 3-phase systems rated 2.4-14.4 kV, and PWVE types can be applied to systems rated...
Read More »
Distribution Switchgear does not use gas or oil insulation.
KyleÃ-® NOVA(TM) encases vacuum interrupter in cycloaliphatic epoxy to eliminate need for insulating fluid, gas, or foam. Requiring no maintenance throughout life of product, unit has polymer casing that resists UV radiation. It maintains self-cleaning, unblemished surface with low adhesion to contaminants. Polymer also resists tracking, reducing flashovers. NOVA technology is available in...
Read More »
Differential Relay suits transformer applications.
Incorporating selectable transformer winding configuration, selective tripping of high/low-side breakers, and breaker health monitoring, iXP-420 also includes Virtual Test Set(TM) event record simulator. Protection features include over-excitation (V/Hz), under/over-voltage, phase overcurrent, negative-sequence overcurrent, and breaker fail-to-trip/fail-to-close indicators. Unit comes with IDEA...
Read More »
Pad-Mount Substations consist of building-block units.
Substation components include parallel transformers, KyleÃ-® RVAC 10T and source transfer switchgear, step-voltage regulators, Kyle 12 vacuum fault interrupter switchgear, Kyle PWE/PWVE reclosers, capacitors, reactors, and control enclosures. Components can be easily added or subtracted and are suitable for severe weather conditions; for developing areas where existing substations can no...
Read More »
Single Phase Voltage Regulator is pad mounted.
Voltage regulator has microprocessor-based control panel and temperature range of -40 to +85Ã-
Read More »
Switchgear improves linemen safety.
KyleÃ-® VFI Vacuum Fault Interrupter pad-mounted switchgear with Visible-Break provides positive visual verification of contact status when distribution-switching procedures require indication of open circuit prior to testing and verification. Visible-Break feature is available in 2-position (open/closed) and 3-position (open/close/ground) configurations with ground switch capabilities. Unit...
Read More »Cooper Industries Acquires Cannon Technologies
HOUSTON, Aug. 15, 2006 -- Cooper Industries (NYSE: CBE) today announced the acquisition by Cooper Power Systems, Inc. of Cannon Technologies, Inc., a Minneapolis-based provider of automation technologies for monitoring and metering, and energy management by electrical utilities. With this acquisition, Cooper Power Systems will provide customers with comprehensive solutions -- from the meter to...
Read More »Evolution of Cooper Power Systems Less-Flammable Transformer Fluids
Waukesha, WI, July 25, 2005 - For the past 30-plus years, Cooper Power Systems has marketed transformer fluids that outperform traditional petroleum-based mineral oils, particularly in the areas of fire safety and environmental compliance. The first entry into the market was R-TempÃ-® fluid in 1975. R-Temp fluid has significantly higher flash and fire points than traditional petroleum-based...
Read More »Modular Substations offer solution for custom needs.
Able to reduce on-site field installation time by up to 75%, pad-mounted modular substations are suited for sites with limited time and manpower. Components and equipment are pre-assembled on structural base and shipped ready for installation and energization. With aesthetically pleasing low profile, transformers are suited for urban and remote locations, including residential, industrial, and...
Read More »Voltage Regulator/Tap Changer enables preventive maintenance.
Voltage Regulator Control, Model CL-6A and Quik-Drive Tap Changer System allow utilities to automatically peform predictive maintenance on voltage regulators. Model CL-6A includes flash card port for programming and data retrieval, backlit display, and user-selectable menus. Metering-PLUS(TM) functionality groups and displays associated parameters on one screen. Tap changer provides 32 steps in 9...
Read More »
Vacuum Switchgear installs in any position.
VACpacÃ-® switchgear features non-combustible insulating medium, SF6 gas, and can be used indoors or outdoors. It fits through manholes and vault access openings, and mounts on walls, floors, or ceilings. VACpac suits system applications up to 35 kV. It can switch or sectionalize load, loop underground systems, perform source transfers, and provide tap overcurrent protection. Capacitor...
Read More »
Reclosers offer vacuum interruption and DA capabilities.
Kyle-® PWE and PWVE pad-mounted, 3-phase, automatic circuit reclosers provide overcurrent protection for distribution systems that use underground cable. Offered with microprocessor controls, products suit 15 and 27 kV systems that include overhead and underground construction on one feeder. PWE types protect 3-phase systems rated 2.4-14.4 kV, and PWVE types can be applied to systems rated...
Read More »
Distribution Switchgear does not use gas or oil insulation.
KyleÃ-® NOVA(TM) encases vacuum interrupter in cycloaliphatic epoxy to eliminate need for insulating fluid, gas, or foam. Requiring no maintenance throughout life of product, unit has polymer casing that resists UV radiation. It maintains self-cleaning, unblemished surface with low adhesion to contaminants. Polymer also resists tracking, reducing flashovers. NOVA technology is available in...
Read More »
Differential Relay suits transformer applications.
Incorporating selectable transformer winding configuration, selective tripping of high/low-side breakers, and breaker health monitoring, iXP-420 also includes Virtual Test Set(TM) event record simulator. Protection features include over-excitation (V/Hz), under/over-voltage, phase overcurrent, negative-sequence overcurrent, and breaker fail-to-trip/fail-to-close indicators. Unit comes with IDEA...
Read More »
Pad-Mount Substations consist of building-block units.
Substation components include parallel transformers, KyleÃ-® RVAC 10T and source transfer switchgear, step-voltage regulators, Kyle 12 vacuum fault interrupter switchgear, Kyle PWE/PWVE reclosers, capacitors, reactors, and control enclosures. Components can be easily added or subtracted and are suitable for severe weather conditions; for developing areas where existing substations can no...
Read More »
Single Phase Voltage Regulator is pad mounted.
Voltage regulator has microprocessor-based control panel and temperature range of -40 to +85Ã-
Read More »