Flexco - Flexible Steel Lacing Co.
Downers Grove, IL 60515
Portable Roller Lacer speeds installation of wire hooks.
Offered in widths of 24, 36, 48, and 60 in., ClipperÃ-® Roller LacerÃ-® Gold Class(TM) can be driven by 18 V cordless drill or operated manually with handle or ratchet in emergency situations. Shelf supports belt and guides it into hook points during installation. It can be moved into loading position to speed insertion of belt. Lacer Face Strip eliminates need for locking lever and...
Read More »Belt Cutters make square cuts in belts up to 1 in. thick.
Designed with safety features to protect users, Series 840 handles belts from 3/8-1 in. thick and belt widths of 36-84 in., while ClipperÃ-® 845LD Cutters are designed for belts up to Ã-½ in. thick and belt widths from 36-72 in. Both feature flat top design for protection from tip when upper beam is opened, drive wrench for chain tensioner belt adjustments, and removable clamp bars that...
Read More »
Conveyor Belt Fasteners target high-impact applications.
FlexcoÃ-® R9S Scalloped Edge(TM) Fasteners feature 8-rivet attachment for high-tension belts with mechanical fastener ratings up to 2,000 PIW. Stamped from 0.135 in. 300 series stainless steel, units accommodate belt thicknesses from 15/32-1 in. running on conveyors with minimum end-pulley diameter of 42 in. Fasteners grip belt end between top and bottom plates, are 1Ã-½ in. wide and...
Read More »
Rivet Conveyor Belt Fasteners suit high-tension systems.
Developed for heavily loaded mainline and panel belts in underground and surface mining, Flexco-® R9S fasteners are stamped from 0.135 in. thick 300 Series stainless steel and accommodate belt thickness from 5/8-1 in. Fasteners, part of SR(TM) Scalloped-Edge(TM) rivet-hinged conveyor belt fastener system, feature 8-rivet attachment and suit belts with mechanical fastener ratings up to 2,000 PIW...
Read More »
Staple Driver speeds belt fastening process.
Designed for simultaneous installation of 4 staples, AlligatorÃ-® Ready Set(TM) Quad Staple Driver features heat-treated steel construction and wide striking surface to facilitate use with 2 lb hammer. Driver can be used with existing Alligator Ready Set installation tools.
Read More »
Belt Splicing Tool facilitates lacing installation.
Clipper MicrolacerÃ-® is designed for on-site, manual installation of ClipperÃ-® Wire Hook Lacing in light-duty conveyor belts. Lacer guide blocks span full lacer head width, and face-strip locking is done via knurled knob that allows finger tightening. Also included, offset drive handle enables one-handed installation. Tool accommodates belt widths up to 14 in. with one set-up and...
Read More »
Lacing Tool facilitates belt splicing operations.
Sized to accommodate belt widths to 14 in. with one set-up, Clipper Microlacer-® is suited for on-site, manual installation of Clipper-® Wire Hook Lacing in light-duty conveyor belts. Lacer head enables tool to tightly embed lacing hooks deep into belt for optimized holding strength and minimal wear on splice-contacting conveyor components. Face-strip locking is done with knurled knob that...
Read More »
Tool installs lacing in conveyor belts.
Clipper Roller Lacer-® provides on-site manual installation of Clipper-® Wire Hook Lacing in light-duty conveyor belts. Tool deeply embeds splice into belt for less wear on splice-contacting conveyor components. Lacer guide blocks are same width as lacer head, providing maximum bearing surface with wear resistance. Face-strip locking is done with knurled knob, which allows finger tightening in...
Read More »
Rivet Strips speed conveyor belt splicing.
FlexcoÃ-® Rapid Loader(TM) Collated Rivet Strips facilitate installation of Flexco SR(TM) Rivet-Hinged and BR(TM) Butt-Rivet conveyor belt fasteners. Plastic strips hold 4 sets of 5 rivets in pattern required for SR/BR installation. Each block of 20 rivets, which installs 4 adjacent fasteners, loads in approximately 7 seconds. Strips are color-coded to assure correct rivet size selection for...
Read More »
Connecting Pins extend life of conveyor-belt splices.
Clipper-® Duralink(TM) and DuraStainless(TM), for wire-hook splices, feature nylon coating that provides 10x more abrasion resistance compared to nylon-covered pins. Coating lubricity reduces wear on inner radius of fastener loops. Duralink pins, with coating extruded over braided stainless steel cable, provide flexibility to accommodate troughing conveyors or crowned pulleys. DuraStainless...
Read More »Flexco Introduces Conveyor Audit Program
DOWNERS GROVE, Ill. (March 30, 2011) - Flexco recently introduced the Conveyor Audit Program, designed to help operations evaluate the performance of their conveyor systems. The program allows them to proactively address belt conveyor concerns before they lead to costly repairs and unscheduled downtime. As part of this program, Flexco field specialists will visit the operation and evaluate the...
Read More »
Portable Roller Lacer speeds installation of wire hooks.
Offered in widths of 24, 36, 48, and 60 in., ClipperÃ-® Roller LacerÃ-® Gold Class(TM) can be driven by 18 V cordless drill or operated manually with handle or ratchet in emergency situations. Shelf supports belt and guides it into hook points during installation. It can be moved into loading position to speed insertion of belt. Lacer Face Strip eliminates need for locking lever and...
Read More »Belt Cutters make square cuts in belts up to 1 in. thick.
Designed with safety features to protect users, Series 840 handles belts from 3/8-1 in. thick and belt widths of 36-84 in., while ClipperÃ-® 845LD Cutters are designed for belts up to Ã-½ in. thick and belt widths from 36-72 in. Both feature flat top design for protection from tip when upper beam is opened, drive wrench for chain tensioner belt adjustments, and removable clamp bars that...
Read More »
Conveyor Belt Fasteners target high-impact applications.
FlexcoÃ-® R9S Scalloped Edge(TM) Fasteners feature 8-rivet attachment for high-tension belts with mechanical fastener ratings up to 2,000 PIW. Stamped from 0.135 in. 300 series stainless steel, units accommodate belt thicknesses from 15/32-1 in. running on conveyors with minimum end-pulley diameter of 42 in. Fasteners grip belt end between top and bottom plates, are 1Ã-½ in. wide and...
Read More »
Rivet Conveyor Belt Fasteners suit high-tension systems.
Developed for heavily loaded mainline and panel belts in underground and surface mining, Flexco-® R9S fasteners are stamped from 0.135 in. thick 300 Series stainless steel and accommodate belt thickness from 5/8-1 in. Fasteners, part of SR(TM) Scalloped-Edge(TM) rivet-hinged conveyor belt fastener system, feature 8-rivet attachment and suit belts with mechanical fastener ratings up to 2,000 PIW...
Read More »
Staple Driver speeds belt fastening process.
Designed for simultaneous installation of 4 staples, AlligatorÃ-® Ready Set(TM) Quad Staple Driver features heat-treated steel construction and wide striking surface to facilitate use with 2 lb hammer. Driver can be used with existing Alligator Ready Set installation tools.
Read More »
Belt Splicing Tool facilitates lacing installation.
Clipper MicrolacerÃ-® is designed for on-site, manual installation of ClipperÃ-® Wire Hook Lacing in light-duty conveyor belts. Lacer guide blocks span full lacer head width, and face-strip locking is done via knurled knob that allows finger tightening. Also included, offset drive handle enables one-handed installation. Tool accommodates belt widths up to 14 in. with one set-up and...
Read More »
Lacing Tool facilitates belt splicing operations.
Sized to accommodate belt widths to 14 in. with one set-up, Clipper Microlacer-® is suited for on-site, manual installation of Clipper-® Wire Hook Lacing in light-duty conveyor belts. Lacer head enables tool to tightly embed lacing hooks deep into belt for optimized holding strength and minimal wear on splice-contacting conveyor components. Face-strip locking is done with knurled knob that...
Read More »
Tool installs lacing in conveyor belts.
Clipper Roller Lacer-® provides on-site manual installation of Clipper-® Wire Hook Lacing in light-duty conveyor belts. Tool deeply embeds splice into belt for less wear on splice-contacting conveyor components. Lacer guide blocks are same width as lacer head, providing maximum bearing surface with wear resistance. Face-strip locking is done with knurled knob, which allows finger tightening in...
Read More »
Rivet Strips speed conveyor belt splicing.
FlexcoÃ-® Rapid Loader(TM) Collated Rivet Strips facilitate installation of Flexco SR(TM) Rivet-Hinged and BR(TM) Butt-Rivet conveyor belt fasteners. Plastic strips hold 4 sets of 5 rivets in pattern required for SR/BR installation. Each block of 20 rivets, which installs 4 adjacent fasteners, loads in approximately 7 seconds. Strips are color-coded to assure correct rivet size selection for...
Read More »