OMRON Corporation
Schaumburg, IL 60173
Share:
Omron Introduces Three New Inspection and Software Tools to Optimize PCB Production at IPC/APEX in Las Vegas
SCHAUMBURG, IL (March 13, 2009) - At IPC/APEX trade show in Las Vegas, Nevada, March 31 to April 2, Omron Electronics LLC (www.omron247.com) will introduce three new inspection and software tools to optimize printed circuit board production. Located at booth #1147, Omron will introduce the world's first automated dual mode in-line X-ray inspection system, a new high-speed in-line solder...
Read More »
In-Line AOI System is suited for PCB inspection.
Available in models for 10 x 13 in. and 18 x 20 in. boards, VT-S700 utilizes telecentric lens with 2-megapixel 3 CCD camera to minimize image distortion. It offers selectable resolution for 10, 15, or 20 microns for components down to 12 mil pitch. Product includes 3-color highlight system that illuminates board in 360Ã-
Read More »
Position Controller suits applications with 2, 4, and 16 axes.
Utilizing high-speed motion control network, PLC-based CJ position controller can be paired with micro CP1H controller for small machine applications or combined with CJ1, CJ2, or CS1 devices for production line applications. Parameters are stored in module for optimized network access, and controller and servo drives are programmed using CX-One automation software. Motion control bus enables GN...
Read More »
Dual-Mode Scanner offers efficient PCB inspection.
Allowing inspection time of 60 sec for 4 BGAs, depending on board layout, VT-X series minimizes tact time for in-line, post-solder inspection of PCBs. Dual-mode x-ray inspection system combines CT scanning, to eliminate clutter from bottom side parts while top side is inspected, and high-speed tomosynthesis scanning for when bottom side components are not present. It can inspect boards up to 10 x...
Read More »
Omron's Space-Saving R7D-B Series Servo Drives Deliver Advanced Functionality in an Ultra Compact Design at Low Cost
SCHAUMBURG, IL (September 2008)-Omron Electronics LLC (www.omron247.com) addresses machine builder concerns about how to reduce the complexity of applying servo drives and achieve faster start-up and more reliable operation in a smaller, lower cost package with the new R7D-B Series Servo Drives. Practical functionality featuring simple, real-time auto-tuning and adaptive vibration suppression...
Read More »
Inductive Proximity Sensor suits food and beverage industries.
Available in M12, M18, and M30 sizes, Series E2EH heat-, detergent-, and corrosion-resistant proximity sensors offer sensing range up to 12 mm, which helps avoid collision damage with passing objects. It uses rugged PBT sensing surface and heat-resistant PVC cable, and features cylindrical food-grade 316L stainless steel housing. IP67 and IP69K compliant device is water-resistant under...
Read More »Fiber Optic Sensor detects true colors in workpieces.
Utilizing 10 mm wide amplifier with White LED, Model E3X-DAC measures changes in RGB parameters and processes them as ratio, so they are unaffected by light-intensity variations. One-touch teaching facilitates setup in registering colors, while smart functions optimize positioning of target objects for detection. Sensor includes timer function with variable ON or OFF delay up to 5 s, and response...
Read More »HMI integrates control, display, and open I/O network.
NSJ series integrates NS HMI and CJ1 PLC into single HMI controller with built-in DeviceNet master that reduces I/O wiring to single open network cable. Display screens range in size from 5.7-12.1 in. with resolutions from 320 x 240 to 800 x 600. Features include built-in Ethernet, as well as USB, serial programming, and printer ports. CX-One software provides program development for display and...
Read More »
Smart Sensor combines 2D CMOS imaging and laser measurement.
With 110 Ã-µs response time and 0.25 Ã-µm resolution, ZS sensor can inspect moving workpieces and capture data on-the-fly, while customizable gain setting lets users optimize performance for specific environmental conditions. Modular, plug-and-play design employs 5 separate sensing heads for distances from 20-200 mm and measuring ranges from Ã-
Read More »Safety Light Curtain features position detection muting.
Along with blanking function that disables detection for beams that are constantly blocked, F3SJ-A Ver.2 provides muting function that temporarily disables light curtain when item passes through its detection zone. Muting function incorporates position detection capability, enabling safety protection even when operator has to install workpiece on equipment. Other functions include partial muting...
Read More »New OEM Partnership Program from OMRON Automation and Safety Helps Design Engineers Develop Machines More Quickly
Program delivers machine safeguarding test and evaluation units without cost to the OEM SCHAUMBURG, IL – OMRON Automation and Safety introduces the OEM Partnership Program. Program partners benefit from an expedited test and evaluation process from OMRON Automation and Safety that quickly gets the best safety product for a given application into the design engineer’s hands for evaluation, and...
Read More »Omron Introduces Three New Inspection and Software Tools to Optimize PCB Production at IPC/APEX in Las Vegas
SCHAUMBURG, IL (March 13, 2009) - At IPC/APEX trade show in Las Vegas, Nevada, March 31 to April 2, Omron Electronics LLC (www.omron247.com) will introduce three new inspection and software tools to optimize printed circuit board production. Located at booth #1147, Omron will introduce the world's first automated dual mode in-line X-ray inspection system, a new high-speed in-line solder...
Read More »
In-Line AOI System is suited for PCB inspection.
Available in models for 10 x 13 in. and 18 x 20 in. boards, VT-S700 utilizes telecentric lens with 2-megapixel 3 CCD camera to minimize image distortion. It offers selectable resolution for 10, 15, or 20 microns for components down to 12 mil pitch. Product includes 3-color highlight system that illuminates board in 360Ã-
Read More »
Position Controller suits applications with 2, 4, and 16 axes.
Utilizing high-speed motion control network, PLC-based CJ position controller can be paired with micro CP1H controller for small machine applications or combined with CJ1, CJ2, or CS1 devices for production line applications. Parameters are stored in module for optimized network access, and controller and servo drives are programmed using CX-One automation software. Motion control bus enables GN...
Read More »
Dual-Mode Scanner offers efficient PCB inspection.
Allowing inspection time of 60 sec for 4 BGAs, depending on board layout, VT-X series minimizes tact time for in-line, post-solder inspection of PCBs. Dual-mode x-ray inspection system combines CT scanning, to eliminate clutter from bottom side parts while top side is inspected, and high-speed tomosynthesis scanning for when bottom side components are not present. It can inspect boards up to 10 x...
Read More »
Omron's Space-Saving R7D-B Series Servo Drives Deliver Advanced Functionality in an Ultra Compact Design at Low Cost
SCHAUMBURG, IL (September 2008)-Omron Electronics LLC (www.omron247.com) addresses machine builder concerns about how to reduce the complexity of applying servo drives and achieve faster start-up and more reliable operation in a smaller, lower cost package with the new R7D-B Series Servo Drives. Practical functionality featuring simple, real-time auto-tuning and adaptive vibration suppression...
Read More »
Inductive Proximity Sensor suits food and beverage industries.
Available in M12, M18, and M30 sizes, Series E2EH heat-, detergent-, and corrosion-resistant proximity sensors offer sensing range up to 12 mm, which helps avoid collision damage with passing objects. It uses rugged PBT sensing surface and heat-resistant PVC cable, and features cylindrical food-grade 316L stainless steel housing. IP67 and IP69K compliant device is water-resistant under...
Read More »Omron Electronics de Mexico, S.A. Opens for Business to Support Omron's Industrial Automation Customers
SCHAUMBURG, IL (March, 2008) - Omron celebrated the opening of Omron Electronics de Mexico, S.A., a new regional headquarters in Apodaca, Nuevo Leon, Mexico, on January 23, 2008. Under the direction of Ricardo Lomeli, General Manager, the company will provide sales and technical support for the growing number of Omron industrial automation customers across Mexico. A key function for the new...
Read More »Fiber Optic Sensor detects true colors in workpieces.
Utilizing 10 mm wide amplifier with White LED, Model E3X-DAC measures changes in RGB parameters and processes them as ratio, so they are unaffected by light-intensity variations. One-touch teaching facilitates setup in registering colors, while smart functions optimize positioning of target objects for detection. Sensor includes timer function with variable ON or OFF delay up to 5 s, and response...
Read More »Omron Electronics Selects Gregg A. Holst to Be New President and Chief Operating Officer
SCHAUMBURG, IL (June 11, 2007) - Gregg A. Holst has been appointed Omron Electronics LLC's Chief Operating Officer and President. He assumed the position immediately, filling a 10-month-long vacancy created by the death of the previous COO and President. As chief operating officer, Holst will direct the marketing, sales, and service operations of Omron Electronics LLC in the United States, Latin...
Read More »