Detailed contact information:
Epoxy Adhesive offers temperature resistance up to 350°F. Return to story
Latest New Product News from
Aremco Products, Inc.
Optimized for machinability using carbide tools, Aremcolox™ 502-600 is suited for use in high vacuum and electrical and electronic high temperature applications. Properties include respective compressive and flexural strengths of 32,000 and 14,000 psi, dielectric strength of 380 V/mil, dielectric constant of 6.8 @ 1 MHz, and thermal conductivity of 4.08 Btu-in/hr-ft²-°F. Stock sizes include ¼–1 in. dia x 18 in. long rods and 14 x 20 x 1/8–1 in. plates. Custom sizes/parts can also be produced.
Consisting of single-part, waterborne, inorganic coating, Ceramacoat™ 845-WHT bonds well to glass and quartz components in applications to 1,500°F. Odorless product is formulated to viscosity range of 400–700 cP with solids content of 41.3% by weight and 22.9% by volume, and density of 1.80–1.85 g/cc. Applied by dipping or pneumatic spray equipment, coating has typical dry film thickness of less than 0.001 in. After curing, film is abrasion and moisture resistant, with no outgassing. Read More
Consisting of hydraulic-setting, phosphate-bonded, zirconium oxide filled ceramic compound, Ceramacast™ 646N is suitable for encapsulating and potting high temperature electrical components such as resistance heaters, hot gas igniters, thermocouples, and strain gauges used in applications to 3,000°F. Cured material demonstrates shrinkage rate of less than 1%, volume resistivity of 109 Ω-cm, dielectric strength of 250 V/mil, and compressive strength of 11,500 psi. Read More
Formulated for bonding and coating mica, glass-ceramics, and metals, Ceramabond™ 632 features dielectric strength of 150 V/mil at room temperature, coefficient of thermal expansion of 4.7 ppm/°F, and viscosity of 10,000–25,000 cp. Specific gravity is 1.45–1.50 g/cc and pH is 11.0. Applied using brush, syringe, or pneumatic dispenser, mica-filled adhesive sets rapidly at room temperature and step cures at 200°F and 500°F for 2 hours each. Cured material resists most acids, solvents, and fuels. Read More
Inorganic, water-dispersed Ceramabind™ 643-1, resistant to temperatures to 3,000°F, mixes with range of oxide and metallic powders into inert, electrically, chemically, and wear-resistant material that will not outgas under ultra high vacuum (UHV). Typical uses include formulating corrosion protective coatings for high-temperature metal structures as well as producing chemically resistant adhesives and patching compounds. Viscosity is 50–60 cP, and solids content by weight is 30.0–35.0%. Read More
Used to coat lighting fixtures and industrial process equipment up to applications of 1,100°F, Corr-Paint™ CP4040 single-part, white-pigmented, silicone-based water-dispersible coating system adheres to glass, quartz, ceramic, as well as carbon and stainless steel. Coating dries at room temperature and can be cured in-situ or more rapidly at 450°F in 1 hr or 480ºF in 45 min. Cured coating is color stable at high temperatures and resistant to oxidation, UV light, humidity, and salt spray. Read More
Consisting of single-part, 100% solids, thermally conductive, silicone grease, Heat-Away™ 640 is used in heat transfer applications from -60 to 550°F. Product is formulated as thick paste that will not flow after application and maintains stable viscosity over entire temperature range. With thermal conductivity of 4.68 W/m-K, grease optimizes thermal transfer between heaters and process vessels and various heat sinks used in heat exchangers in electrical and electronic applications. Read More
Formulated using high purity silver flake, Aremco-Bond™ 556-HTHC is used for microelectronic chip bonding, semiconductor die-attach, hybrid packaging, and other electrical/electronic assembly applications. Two-part, electrically and thermally conductive adhesive exhibits low volume resistivity of less than 0.0001 Ω-cm at room temperature and thermal conductivity of 2.2 W/m-°K. Product offers tensile shear strength of 1,700 psi, Shore D hardness of 90, and viscosity range of 40,000–45,000 cP. Read More
Other Company News from
Aremco Products, Inc.