Computer Conversions Corporation
East Northport, NY 11731
Synchro to BCD Converters offer choice of scale factor.
Measuring 2.6 x 3.1 x .82 in., Synchro to BCD Converter Modules mount on PC boards and convert Synchro or Resolver inputs of 11.8 or 90 V, 400 Hz into 3 or 4 decade BCD data representing angle with accuracy of Ã-
Read More »Synchro to Digital Converters provide -
Single-module, 2-speed Synchro to Digital devices convert Synchro or Resolver inputs of 11.8, 26, or 90 V/400 Hz or 90 V/60 Hz into 16-bit parallel binary outputs representing angle. Able to track rates up to 1,000Ã-
Read More »
Digital to Synchro Converters provide -
Measuring 2.6 x 3.1 x .60 in., Digital to Synchro Converter Modules accept 14-bit natural binary angle and convert it into 3-wire synchro or 4-wire resolver signal. Standard output voltages are 90 or 11.8 V RMS L-L, 60 or 400 Hz. Output is short circuit protected and loading of 1.5 Va is available. Digital inputs are TTL/DTL compatible, and synchro output and reference is fully transformer...
Read More »
Synchro/Resolver Output Modules suit simulation applications.
Series PC104-DS offers 2 channels of Digital to Synchro and Digital to Resolver conversion in standard stack-through PC 104 footprint. Units feature 16-bit resolution, transformer isolated reference inputs, and completely short-circuit proof outputs capable of driving up to 1.2 Va load/channel. Reference inputs are 2-115 Vac at 57-3,000 Hz, and external output transformers are available for...
Read More »
Digital to Synchro Converters are standard bus compatible.
Offering output power of 1.5, 2, or 5 Va, STB/DSC Series consists of single-slot STD Bus converters that will accept up to 16-bit natural binary information and convert it to 11.8 or 90 V synchro or resolver information from 50 Hz to 5 KHz. Data is addressable in 2 byte format over STD backplane. Outputs are short circuit proof and current limited. Only 60 Hz units require external transformer....
Read More »
Digital Converter Modules provide DC velocity outputs.
Synchro-to-Digital Converters provide DC voltage output proportional to velocity, in addition to 10, 12, or 14-bit digital output. Velocity output of Ã-
Read More »
Synchro-Resolver-Encoder Card offers 4 or 8 channels.
VB Synchro-Resover-Encoder Card plugs directly into any VME compatible computer and may be populated with any combination of synchro/resover to digital and/or digital to synchro/resolver converters with industry standard pin-outs. Transformer isolation provides system noise immunity and preserves integrity of bus. VB card supports single-turn converter precision to one part in 65,536 and...
Read More »
Digital-to-Synchro Converters require +5 Vdc input power.
Measuring 2.6 x 3.1 x .51 in., reference-powered Digital-to-Synchro Converter modules accept 14-bit natural binary angle and convert it into 3-wire synchro signal. Output is short circuit proof and current limited with transient protection and thermal cutoff. Units rated at 400 Hz have 4.5 Va load capability, while 60 Hz units feature 2 Va capability. All utilize thermally conductive encapsulant...
Read More »
Digital to Synchro Converters drive up to 25 VA.
Products, available with 14-, 12-, or 10-bit resolution, drive torque receivers with accuracies of up to Ã-
Read More »
Synchro Modules digitally control analog servo systems.
Measuring 2.6 x 3.1 x 3.1 x .82 in., solid-state synchro control transformer modules directly replace electro-mechanical control transformers. They simultaneously accept synchro or resolver inputs of 11.8 and 90 V, 400 Hz or 90 V, 60 Hz and 14, 12, or 10 bit binary digital data. Insensitive to Ã-
Read More »Synchro to BCD Converters offer choice of scale factor.
Measuring 2.6 x 3.1 x .82 in., Synchro to BCD Converter Modules mount on PC boards and convert Synchro or Resolver inputs of 11.8 or 90 V, 400 Hz into 3 or 4 decade BCD data representing angle with accuracy of Ã-
Read More »Synchro to Digital Converters provide -
Single-module, 2-speed Synchro to Digital devices convert Synchro or Resolver inputs of 11.8, 26, or 90 V/400 Hz or 90 V/60 Hz into 16-bit parallel binary outputs representing angle. Able to track rates up to 1,000Ã-
Read More »
Digital to Synchro Converters provide -
Measuring 2.6 x 3.1 x .60 in., Digital to Synchro Converter Modules accept 14-bit natural binary angle and convert it into 3-wire synchro or 4-wire resolver signal. Standard output voltages are 90 or 11.8 V RMS L-L, 60 or 400 Hz. Output is short circuit protected and loading of 1.5 Va is available. Digital inputs are TTL/DTL compatible, and synchro output and reference is fully transformer...
Read More »
Synchro/Resolver Output Modules suit simulation applications.
Series PC104-DS offers 2 channels of Digital to Synchro and Digital to Resolver conversion in standard stack-through PC 104 footprint. Units feature 16-bit resolution, transformer isolated reference inputs, and completely short-circuit proof outputs capable of driving up to 1.2 Va load/channel. Reference inputs are 2-115 Vac at 57-3,000 Hz, and external output transformers are available for...
Read More »
Digital to Synchro Converters are standard bus compatible.
Offering output power of 1.5, 2, or 5 Va, STB/DSC Series consists of single-slot STD Bus converters that will accept up to 16-bit natural binary information and convert it to 11.8 or 90 V synchro or resolver information from 50 Hz to 5 KHz. Data is addressable in 2 byte format over STD backplane. Outputs are short circuit proof and current limited. Only 60 Hz units require external transformer....
Read More »
Digital Converter Modules provide DC velocity outputs.
Synchro-to-Digital Converters provide DC voltage output proportional to velocity, in addition to 10, 12, or 14-bit digital output. Velocity output of Ã-
Read More »
Synchro-Resolver-Encoder Card offers 4 or 8 channels.
VB Synchro-Resover-Encoder Card plugs directly into any VME compatible computer and may be populated with any combination of synchro/resover to digital and/or digital to synchro/resolver converters with industry standard pin-outs. Transformer isolation provides system noise immunity and preserves integrity of bus. VB card supports single-turn converter precision to one part in 65,536 and...
Read More »
Digital-to-Synchro Converters require +5 Vdc input power.
Measuring 2.6 x 3.1 x .51 in., reference-powered Digital-to-Synchro Converter modules accept 14-bit natural binary angle and convert it into 3-wire synchro signal. Output is short circuit proof and current limited with transient protection and thermal cutoff. Units rated at 400 Hz have 4.5 Va load capability, while 60 Hz units feature 2 Va capability. All utilize thermally conductive encapsulant...
Read More »
Digital to Synchro Converters drive up to 25 VA.
Products, available with 14-, 12-, or 10-bit resolution, drive torque receivers with accuracies of up to Ã-
Read More »
Synchro Modules digitally control analog servo systems.
Measuring 2.6 x 3.1 x 3.1 x .82 in., solid-state synchro control transformer modules directly replace electro-mechanical control transformers. They simultaneously accept synchro or resolver inputs of 11.8 and 90 V, 400 Hz or 90 V, 60 Hz and 14, 12, or 10 bit binary digital data. Insensitive to Ã-
Read More »