Thomas C. Wilson, LLC
Long Island City, NY 11101
Automatic Tube Cleaner minimizes HVAC cleaning time.
Capable of removing light- to medium-sized deposits, Wils-Matic(TM) Auto Tube Puncher is self-contained unit designed for wet applications with straight tubes up to 50 ft long. With dual-action trigger, feeder gun controls shaft rotation, shaft feed, and water flow. In addition to non-slip feeding and adjustable forward end limit stop, product offers adjustable shaft and casing length stop unit...
Read More »
Tube Cleaner maintains boilers, condensers, and heaters.
Available in 1 or 2 hp models, Wils-Away 1500 removes soot and scale from straight tubes in fire tube boilers, air heaters, and other pressure vessels. It includes electric drive unit and accessories such as expanding brush that utilizes centrifugal force to cut through scale, and spiral steel brush that removes soot in single pass. Optional accessories include vacuum unit and twin foot pedal,...
Read More »
Self-Feeder has labor- and time-saving design.
Compatible with any Ã-½ and 3/8 in. shaft and casing, Wils-Matic(TM) Self-Feeder is designed for cleaning straight tubes up to 45 ft long in heat exchangers, condensers, chillers, absorbers, and coolers. It requires no special brushes or shafts and features auto teach mode, 1 hp motor, and auto-reeling shaft storage. With 125 lb net dry weight, machine has 4.2 fps self-feed rate and 50 lb...
Read More »
Tube Roller improves seal consistency for HVAC applications.
Wils-Tronic(TM) electronic tube expanding drive maintains constant speed throughout entire tube rolling process, even at various torque settings, eliminating possibility of under- or over-rolled tubes. Telescopic arm helps eliminate operator fatigue, speeds range from 30-1,200 rpm, and programmable torque ranges from 1-300 ft-lbs. Unit offers manual, full automatic, and programmable modes of...
Read More »
Air Motor features triggerless operation.
Model 952 features dual-purpose air line: same line that brings compressed air to motor carries exhaust air away. When motor is pushed forward, it automatically shifts into Forward rotation. When operator pulls back, it shifts into Reverse. Motor produces 5 lb-ft of torque for expanding or cutting Ã-¼ to 3/8 in. OD tubes, with maximum speed of 800 rpm. It includes Ã-¼ in. Square Quick...
Read More »
Hydraulic Tube Puller removes old tubing.
Using 1 1/8 hp electric motor that delivers 55 cfm of oil at 10,000 psi, Hydraulic Tube Extractor pulls tubes from 5/8 to 1 1/4 in. OD. Extractor is also available in kit with 110 V, 60Hz or 220 V, 50-60 Hz electric motor. Kit includes extractor gun, power hose with on/off assembly, hydraulic power unit, and collet gripper set. Each collet gripper set includes mandrel and depth stop. Gripper sets...
Read More »
Brush and Scraper expand to clean tubes.
As Expanding Brush and Expanding Scraper spin, centrifugal force raises floating brushes or floating scraper blades so they conform to tube's ID, even if ID changes along length of tube. As brushes and scrapers wear, they raise more to conform to tube's ID. Applications include cleaning boilers, heat exchangers, condensers, chillers, steam generators, and pressure vessels. Brush cleans tubes up...
Read More »
Electric Motors are suitable for tube rolling.
Models 41238 and 22488 Electric Rolling Motors can both be repeatedly run to stall without damage when expanding tubes in boilers, heat exchangers, and other pressure vessels. Model 41238 weighs 19 lb, expands tubes from Ã-¾ to 2Ã-½ in. OD, and can be used to power tube cutters, tube beading units, tube bevellers and other tools. More powerful Model 22488 can expand tubes up to 3 in. OD,...
Read More »
Tube Cleaning System available in three configurations.
Wils-Away Pneumatic Systems include pneumatic drive unit, flexible shaft and casing, 6 spiral brushes or expanding brush and refill set, and foot pedal for hands-free On/Off and Forward/Reverse operation. Wils-Away 3000 is a 1 1/2 HP portable unit; Wils-Away 4000 4 HP dolly mounted unit is for heat exchangers, condensers, and small diameter pressure vessels; and Wils-Away 4500 4 HP dolly mounted...
Read More »
Tube End Facing Tools suit pressure vessel fabrication.
Two types of tools are available: Fixed-Type for 1/4 to 9/16 in. OD tubes, and Insert-Type for 5/8 to 2 in. OD tubes. Tools face brass, copper, steel, stainless steel, copper nickel, and titanium tubes. Cutter on fixed-type tool can be sharpened, and insert-type tool uses easy-to-replace cutter bits. Fabricators use tube facing tools to trim and face tubes before they are rolled, and re-tubers...
Read More »
Automatic Tube Cleaner minimizes HVAC cleaning time.
Capable of removing light- to medium-sized deposits, Wils-Matic(TM) Auto Tube Puncher is self-contained unit designed for wet applications with straight tubes up to 50 ft long. With dual-action trigger, feeder gun controls shaft rotation, shaft feed, and water flow. In addition to non-slip feeding and adjustable forward end limit stop, product offers adjustable shaft and casing length stop unit...
Read More »
Tube Cleaner maintains boilers, condensers, and heaters.
Available in 1 or 2 hp models, Wils-Away 1500 removes soot and scale from straight tubes in fire tube boilers, air heaters, and other pressure vessels. It includes electric drive unit and accessories such as expanding brush that utilizes centrifugal force to cut through scale, and spiral steel brush that removes soot in single pass. Optional accessories include vacuum unit and twin foot pedal,...
Read More »
Self-Feeder has labor- and time-saving design.
Compatible with any Ã-½ and 3/8 in. shaft and casing, Wils-Matic(TM) Self-Feeder is designed for cleaning straight tubes up to 45 ft long in heat exchangers, condensers, chillers, absorbers, and coolers. It requires no special brushes or shafts and features auto teach mode, 1 hp motor, and auto-reeling shaft storage. With 125 lb net dry weight, machine has 4.2 fps self-feed rate and 50 lb...
Read More »
Tube Roller improves seal consistency for HVAC applications.
Wils-Tronic(TM) electronic tube expanding drive maintains constant speed throughout entire tube rolling process, even at various torque settings, eliminating possibility of under- or over-rolled tubes. Telescopic arm helps eliminate operator fatigue, speeds range from 30-1,200 rpm, and programmable torque ranges from 1-300 ft-lbs. Unit offers manual, full automatic, and programmable modes of...
Read More »
Air Motor features triggerless operation.
Model 952 features dual-purpose air line: same line that brings compressed air to motor carries exhaust air away. When motor is pushed forward, it automatically shifts into Forward rotation. When operator pulls back, it shifts into Reverse. Motor produces 5 lb-ft of torque for expanding or cutting Ã-¼ to 3/8 in. OD tubes, with maximum speed of 800 rpm. It includes Ã-¼ in. Square Quick...
Read More »
Hydraulic Tube Puller removes old tubing.
Using 1 1/8 hp electric motor that delivers 55 cfm of oil at 10,000 psi, Hydraulic Tube Extractor pulls tubes from 5/8 to 1 1/4 in. OD. Extractor is also available in kit with 110 V, 60Hz or 220 V, 50-60 Hz electric motor. Kit includes extractor gun, power hose with on/off assembly, hydraulic power unit, and collet gripper set. Each collet gripper set includes mandrel and depth stop. Gripper sets...
Read More »
Brush and Scraper expand to clean tubes.
As Expanding Brush and Expanding Scraper spin, centrifugal force raises floating brushes or floating scraper blades so they conform to tube's ID, even if ID changes along length of tube. As brushes and scrapers wear, they raise more to conform to tube's ID. Applications include cleaning boilers, heat exchangers, condensers, chillers, steam generators, and pressure vessels. Brush cleans tubes up...
Read More »
Electric Motors are suitable for tube rolling.
Models 41238 and 22488 Electric Rolling Motors can both be repeatedly run to stall without damage when expanding tubes in boilers, heat exchangers, and other pressure vessels. Model 41238 weighs 19 lb, expands tubes from Ã-¾ to 2Ã-½ in. OD, and can be used to power tube cutters, tube beading units, tube bevellers and other tools. More powerful Model 22488 can expand tubes up to 3 in. OD,...
Read More »
Tube Cleaning System available in three configurations.
Wils-Away Pneumatic Systems include pneumatic drive unit, flexible shaft and casing, 6 spiral brushes or expanding brush and refill set, and foot pedal for hands-free On/Off and Forward/Reverse operation. Wils-Away 3000 is a 1 1/2 HP portable unit; Wils-Away 4000 4 HP dolly mounted unit is for heat exchangers, condensers, and small diameter pressure vessels; and Wils-Away 4500 4 HP dolly mounted...
Read More »
Tube End Facing Tools suit pressure vessel fabrication.
Two types of tools are available: Fixed-Type for 1/4 to 9/16 in. OD tubes, and Insert-Type for 5/8 to 2 in. OD tubes. Tools face brass, copper, steel, stainless steel, copper nickel, and titanium tubes. Cutter on fixed-type tool can be sharpened, and insert-type tool uses easy-to-replace cutter bits. Fabricators use tube facing tools to trim and face tubes before they are rolled, and re-tubers...
Read More »