Company News


45 Beechwood Dr., North Andover, MA, 01845, US

  • 800-341-5266

Dave Fallon
Internet Marketing Strategist
Phone: 978-682-6936 ext 1450
E-mail this person

Share Like Tweet Add Email

Latest New Product News from

Electrical Equipment & Systems, Electronic Components & Devices, Plant Furnishings & Accessories

NEMA-Rated Enclosures protect electronic equipment.

November 17, 2015

Molded from halogen-free, self-extinguishing, fiberglass reinforced polyester, NB20 Series withstands extreme temperature and corrosive environments. Enclosures feature fully gasketed lids and stainless steel quick-release latches with padlock hasps, protecting electrical and electronic equipment from water, wind, dust, and chemicals as well as theft and damage. Measuring 20 x 16 x 11 in., units offer 120 Vac powered and non-powered configurations, as well as heating and cooling options. Read More

Mounting & Attaching Products, Electrical Equipment & Systems

Dual-Band 4x4 MIMO Omni-Directional Antenna has outdoor design.

November 10, 2015

Developed to work seamlessly with dual-band multiple-output (MIMO) access points, HyperLink® HG245806U-4-series features 4 separate 3 ft antennas leads and compact, unobtrusive, UV-resistant radome. Each dual-band lead operates on 2.4 and 5.8 GHz frequencies, allowing radio to select optimal frequency for obtaining highest data rates. Supporting IEEE 802.11ac standard as well as existing 802.11a/b/g/n standards, antenna is also available with RP-TNC plug or RP-SMA plug connectors. Read More

Mounting & Attaching Products, Electrical Equipment & Systems

Omni-Directional Antenna suits in-building wireless networks.

November 3, 2015

With PIM rating of less than -150 dBc and coverage from 700–2,700 MHz, HyperLink® HG72705CUPR-NF supports cellular 4G/LTE, Personal Communication Services, and Wi-Fi 802.11b/g wireless networks. Unit can be mounted through single 11/16 in. hole in solid or suspended ceiling that is up to 1 in. thick. Antenna features single 15.7 in. coax lead terminated with N-Female connector. Single-feed system is achieved through use of internal combiner. Read More

Electrical Equipment & Systems, Material Handling & Storage

GPS/Cellular Antennas serve mobile tracking applications.

October 13, 2015

Designed for automatic vehicle locator and fleet tracking management systems, HyperLink® HG-PCGM01-03FJ and HG-PCGM01-03SM are magnetically mounted, combination 3G/LTE antennas featuring penta-band cellular and high-LNA gain GPS antenna in one low-profile radome. Inputs are accessed via two 3 m leads, and standard models are terminated with FAKRA Jack connectors or SMA connectors. UV-resistant ABS construction enables continuous operation in harsh environments. Read More

Electrical Equipment & Systems

Lightning and Surge Protector targets Ethernet applications.

October 8, 2015

Addressing 10/100/1000/10000 Base-T Ethernet applications, Model AL-CAT6AJW is designed for use with Cat6a Ethernet cabling, but can also be used with Cat5, Cat5e, and Cat6 cabling. Device utilizes thyristor diode technology and provides protection for both common and differential mode surges. Supplied in weather-resistant housing, unit is compatible with 802.3af PoE devices and supports PoE mode A and B for power as well as normal and reverse polarity PoE used in some Cisco access points. Read More

Electronic Components & Devices, Electrical Equipment & Systems

Omni-directional MIMO Antenna offers dual polarity operation.

October 2, 2015

Combining 4 antennas in one package, HyperGain® DPU Series features separate horizontal and vertical elements for 2.4 GHz frequency band and another set of horizontal and vertical elements for 5 GHz frequency band. Dual polarized unit can be used with MIMO/802.11ac devices to enable multi-stream communication up to 4 streams. Available in 6, 9, and 11 dBi gain, outdoor antenna features UV-resistant PVC radome and heavy-duty extruded aluminum base. Read More

Electrical Equipment & Systems

DAS Antennas suit indoor and outdoor applications.

September 24, 2015

Specifically designed for Distributed Antenna System applications, HyperLink HG727 Series provides coverage from 700–2,700 MHz in single antenna package, supporting networks that include cellular 4G/LTE, personal communication services, and 802.11 Wi-Fi connectivity. Antennas come in ceiling mount, omni-directional, sector, and mobile mount styles to address variety of fixed and mobile DAS applications. Read More

Electrical Equipment & Systems

Cable Assemblies provide Mini DisplayPort connections.

June 16, 2015

Addressing mobile device display, digital signage, and high-end PC monitor applications, DPCAC3MM Series features Mini DisplayPort connectors on each end of assembly, while DPCAC2MM Series features standard DisplayPort connector on one end and Mini DisplayPort connector on other end. VAD010FM Inline Adapter, providing female DisplayPort connector on one end and male Mini DisplayPort connector on other end, allows existing DisplayPort cables to be transitioned to Mini DisplayPort. Read More

Electrical Equipment & Systems

Panel-Mount USB Couplers feature high-retention connectors.

June 8, 2015

Addressing USB connectivity application requirements in environments prone to vibration and cable pull, ECF-style USB couplers employ high-retention connectors that offer mating force of 40N max and un-mating force of 15N min. Available connector configurations include USB Type B-A, A-A, and A-B, and shielded housings limit effects of EMI/RFI found in industrial environments. Panel-mount style allows use in enclosures, panels, and other designs where feed-through USB coupler is required. Read More

Communication Systems & Equipment

Embedded PCB Antennas foster wireless capability integration.

February 11, 2015

Designed to directly integrate with devices that require wireless capabilities, HyperLink® embedded antennas can eliminate need for external antenna in OEM and ODM wireless device applications. There are 3 standard models, which support 2.4 GHz, 4.9/5.8 GHz, and dual band 2.4/5.8 GHz operation. All feature integrated, low-loss, 1.13 mm coaxial leads terminated with U.FL/IPX connectors. Custom designs – shapes and sizes, connectors, frequency, and gain – are available. Read More

Electrical Equipment & Systems, Computer Hardware & Peripherals

Cat6/5e/5 PoE Injectors feature 56 Vdc power supplies.

January 27, 2015

Cat6, Cat5e, and Cat5 PoE Injectors with 56 Vdc power supplies address applications where power and data are required to connect end devices over extended distances. Supporting use in 48 Vdc PoE applications, 56 Vdc power supplies compensate for any voltage loss in cable. Options available include single- and quad-port injectors; DIN rail mounting; internal, high-powered surge protection; as well as support for 802.3af and 802.3at standards. Read More

Electrical Equipment & Systems

Surge Protector shields RS232 and industrial control lines.

January 20, 2015

Mounted to DIN 3 rail using DIN mounting clip located on rear of unit, Model HGLND-D2-12 protects differential data or balanced digital or analog lines from transients and surges. Three-stage lightning protector comprises differential gas discharge tube, pair of current limiting series resistors, and low capacitance diode array. By utilizing 3-stage system, Model HGLND-D2-12 is capable of handling surges that single-stage protectors cannot. Read More

Electrical Equipment & Systems

Cat5e and Cat6 Cables stand up to harsh conditions.

December 29, 2014

Designed for use in demanding Ethernet networking applications, outdoor-rated Cat5e and Cat6 Cable Assemblies feature gel-filled jackets that provide moisture protection. UV-protected jackets shield cables from damage caused by sunlight exposure. Additionally, cables are EIA568 color-coded for compatibility with standard installations and have solid conductors for termination into standard IDC connectors. Read More

Electrical Equipment & Systems

Continuous Flex Ethernet Cables feature outdoor rating.

December 15, 2014

Designed for industrial or outdoor environments, Category 5e and Category 6a Patch Cords utilize flame-retardant thermoplastic elastomer jacket that is resistant to oil and UV damage while maintaining CMX flame rating. Double shielding coupled with shielded RJ45 connectors minimizes EMI/RFI interference. Available in lengths from 1–50 ft, cables are suited for oil and gas extraction and refinement, as well as wastewater and mining network applications. Read More

Communication Systems & Equipment, Optics & Photonics

MIMO Antennas include mounting kits.

December 8, 2014

Supplied with mounting brackets and low-loss cable assemblies, Omni, Dish, and Sector style MIMO Antennas connect directly to Ubiquiti® RocketM2 or RocketM5 access points, allowing rapid deployment of wireless networks. Brackets are constructed from stainless steel for outdoor use. Mounting kit is also available as standalone item that can be purchased separately. Read More

Electrical Equipment & Systems

Locking IEC Power Cords provide secure connections.

December 2, 2014

Available in 4 different series, Locking IEC Power Cords are intended for data center, medical, and other AC power connectivity applications where vibration and other conditions may cause cord to become disconnected. Units include locking C13 to N5-15 power cords, locking hospital-grade C13 to N5-15 power cords, C13 to C14 universal jumper/extension cords, and locking C13 to international plug power cords. Read More

Safety & Security Equipment, Computer Hardware & Peripherals, Electrical Equipment & Systems

Panel Mount USB Cables feature ground wires.

November 24, 2014

Offered in 0.3, 0.5, 0.75, 1, 2, and 3 m lengths and suited for use inside box or enclosure, USB 2.0 panel mount cables are available with ground wire for option of electrically grounding USB female connector to panel or enclosure. Molded, panel-mountable construction features 20 AWG power conductors and 28 AWG twisted pair data conductors all under double shield for maximum EMI resistance. Cable is light gray, and each assembly includes two 4-40 x 3/8 in. Phillips pan head mounting screws. Read More

Computer Hardware & Peripherals

USB Adapter Kit extends wireless coverage.

October 31, 2014

Supplied in FCC/IC certified kit, 2.4 GHz 802.11b/g/n Model ARK-2404U-3 comprises WLAN-LCUSB2415 wireless USB Adapter and Hyperlink's 4 dBi omni-directional antenna. Adapter supports data rates of 150 Mbps and features IP67-rated waterproof enclosure for outdoor applications. Included 5 m cable is terminated with USB 2.0 plug for direct connection to desktop or notebook PC. Additional features include 100 mW to 1 W adjustable RF power, Windows OS drivers, and WPA/WPA2 data security. Read More

Computer Hardware & Peripherals

PoE Midspan/Injectors and Kits support DIN rail mounting.

August 28, 2014

Available individually or in kits, with 48 Vdc/48 W or 48 Vdc/70 W power supply, BTD-CATx series feature die-cast aluminum housing with clip on rear that allows mounting to DIN 3 rail. PoE midspan/injectors, available for Cat5, Cat5e, and Cat6 Ethernet applications, provide remote power to and allow flexibility in deployment/installation of PoE-enabled devices — VoIP telephones, wireless access points, CPE devices, IP web and surveillance cameras — in rack and equipment enclosure systems. Read More

Electrical Equipment & Systems

Power Cords feature low smoke zero halogen design.

August 12, 2014

Available in 14, 16, and 18 AWG versions, LSZH Jacketed North American Power Cords are suitable for applications where it is critical to protect people and equipment from toxic smoke and corrosive gases and where PVC cannot be used. LSZH cords are commonly used in many aerospace applications, especially in sealed aircraft environments and electric boats. Read More

Other Company News from