Company News

Murata Power Solutions

11 Cabot Blvd., Mansfield, MA, 02048, US

  • 800-233-2765

John Sutherby
Marketing Communications Director
Phone: 508-964-5117
E-mail this person

Share Like Tweet Add Email

Latest New Product News from
Murata Power Solutions

Electrical Equipment & Systems

Compact, SMT, 1 W, DC/DC Converters come in 3.3 V models.

January 25, 2016

Featuring 3.3 V inputs as well as 3.3 and 5 V outputs, NXE1S0303MC and NXE1S0305MC measure 12.7 x 10.4 x 4.8 mm and suit space-constrained designs. Both high-reliability, surface mounted models, manufactured using automated processes to ensure delivery of consistent performance characteristics, have transformer embedded in substrate and offer up to 3 kVDC input to output isolation. Operating from -40 to +85°C, converters are certified to UL60950 safety standard for reinforced insulation. Read More

Electrical Equipment & Systems, Health, Medical and Dental Supplies & Equipment

Surface Mount 1 W DC/DC Converters are certified for medical use.

October 27, 2015

Supplied in 13.72 x 10.46 x 4.36 mm, halogen-free iLGA package, NXJ1 series offers input voltage options of 3.3, 5, or 12 Vdc and single outputs of 3.3, 5, 12, and 15 Vdc. Integrated transformer in substrate promotes reliability and repeatability for existing applications as well as space-constrained, low-profile designs. Operating across full -40 to +85°C range, series features short circuit protection and MSL 2 rating and is compatible with peak reflow solder temperature of 245°C. Read More

Electrical Equipment & Systems

Power Supplies suit network and storage applications.

October 12, 2015

Housed in 1.57 x 11.0 x 3.2 in. package, D1U3CS Series can deliver full 1,600 W, 12 Vdc output with conversion efficiency as high as 93% at half load. Isolated 1,000 Vrms units have 3.3 Vdc, 20 W standby output and provide power density of 29 W/cu-in. For fault tolerant, redundant, and N+1 applications, hot-pluggable front end power supplies incorporate low-loss ORing FETs on main 12 V output. Fan-cooled, digitally programmable devices are equipped with I²C interface and support PMBus™ protocol. Read More

Electrical Equipment & Systems

Isolated DC-DC Converters deliver 3 Watts.

September 25, 2015

Accommodating wide 4:1 input voltage range around 12 or 48 Vdc nominal, NCS3 Series comprises 8 single-output regulated models providing choice of 3.3, 5, 12, or 15 Vdc output. Units can deliver 3 W across wide range of operating temperatures from -40 to +95°C, with model-dependent derating. Packaged in industry standard, pin-compatible SIP format, through-hole mounting converters are UL 60950 recognized and feature input/output isolation of 1,500 Vdc. Read More

Electrical Equipment & Systems

Regulated 1 W DC/DC Converter comes in miniature package.

August 6, 2015

Fully regulated to within ±0.5% of stated output, MTC1 Series includes 6 single-output models providing 3.3, 5, or 12 Vdc. Voltage trim pin allows adjustment of output voltage by ±10%. Available with nominal input voltages of 12 or 24 Vdc, these isolated devices accommodate 2:1 input range around selected nominal. Other features include remote on/off pin, input to output isolation, and operating range up to 100°C with derating. Read More

Electrical Equipment & Systems

Non-Isolated PoL DC-DC Converters offer up to 95% efficiency.

July 21, 2015

Constructed in single in-line package format, Okami OKR Series utilizes synchronous buck technology. Model OKR-T/20-W12-C, rated at 20 A, accommodates wide 6–13.8 Vdc input and provides programmable output from 0.591–5 Vdc with efficiency up to 94%. Model OKR-T/30-W12-C is rated at 30 A with 5.5–13.8 Vdc input, 0.591–6 Vdc output, and efficiency up to 95%. Finally, 50 A Model OKR-T/50-W12-C has input range of 6.5–13.8 V with output range of 0.591–2.5 Vdc. Read More

Materials & Material Processing

ESD Protection Devices use multi-layer ceramic technology.

June 19, 2015

Supplied in 1005 and 0603 packages, respectively, Models LXES15AAA1-153 and LXES03AAA1-154 combine low voltage ESD protection with dielectric strength to withstand continued high voltage discharge. Units offer ESD protection according to internationally recognized IEC61000-4-2 Level 1 standard at low voltage and low peak voltage levels. Operating from -40 to +85°C, devices are suited for automotive electronics, antenna terminals, and external interfaces of touch panels, monitors, and switches. Read More

Electrical Equipment & Systems

Surface Mount Module isolates data and power in USB environments.

June 2, 2015

Able to switch automatically between full-speed (12 Mbps) and low-speed (1.5 Mbps) operation as required, NMUSB202MC, provides dual port USB data and power isolation from single upstream port. This module, used in conjunction with host controller, counts as 2 USB hubs for cascaded applications and provides full 5 V/500 mA power to each downstream port. Reinforced isolation of 250 VRMS provides safety and EMI immunity while also eliminating ground loops. Read More

Electrical Equipment & Systems, Test & Measuring Instruments

DC/DC Converter Module offers up to 481 W/in.³ power density.

April 14, 2015

Incorporating all power handling components in 25.4 x 12.7 x 12.2 mm package, OKLP-X/60-W12A-C 60 A Power Block solution consists of non-isolated buck converter without PWM controller. Unit supports use with analog or digital PWM controllers and provides regulated 0.6–3.63 Vdc output of up to 60 A from 7–13.2 Vdc input. Suited to use in PoL applications, module delivers energy efficiency, rated at 12 Vin and 3.3 Vout, of 95% typ. Uses include powering FPGAs, ASICs, and MPUs. Read More

Electrical Equipment & Systems

Hot-Swappable AC/DC Power Supply delivers up to 95.5% efficiency.

April 1, 2015

Internally cooled D2U5T-H3-7000-54 provides 7,000 W, 54 Vdc main output at up to 95.5% efficiency at 50% load. User-selectable standby offers 3.3 or 5 Vdc output. With 320–525 Vac input, D2U5T Series offers true 3-wire, 3-phase operation at 7,000 W from Delta or Wye source. Input from voltage sources between 180–264 Vac allows 3,500 W operation, and active PFC lends to 0.99 power factor and <10% harmonic current. Control and monitoring is possible using PMBus™ interface. Read More

Electrical Equipment & Systems

Digital POL DC/DC Converters include 20 and 25 A models.

March 4, 2015

Respectively capable of delivering 20 A/66 W and 25 A/82.5 W output, digitally controlled OKDx-T/20-W12 and OKDx-T/25-W12 series measure 1.01 x 0.543 x 0.323 in. and come in through-hole, single-in-line, and SMT packages. Digital power solutions, with multiple integrated power management functions, accept 4.5–14 V input and offer 0.6–3.3 V output with typ efficiency of 97.1% at 5 Vin, 3.3Vout, and 50% load. Configuration and monitoring is possible via PMBus communication protocol. Read More

Electrical Equipment & Systems

Digitally Controlled POL DC/DC Converter deliver 50 A/165 W.

December 12, 2014

Capable of  from 30.85 x 20.0 x 8.2 mm module, non-isolated OKDx-T/50 series accommodates 4.5–14 Vdc input and provides configurable output voltage from 0.6–3.3 Vdc. Through-hole, single-in-line, and SMT package formats are available, and products can be configured and monitored via PMBus™. Along with Dynamic Loop Compensation, features include Non-Linear Transient Response, phase spreading, optimized dead time control, and digital current sharing. Typ efficiency is 97.2%. Read More

Electrical Equipment & Systems

AC-DC Power Supplies provide 54 Vdc primary output.

December 8, 2014

Measuring 41 x 355.6 x 101.6 mm, D1U4 Series allows up to 4 supplies to be contained on single 1U-high 19 in. rack-mounting chassis. Programmable power supplies, accommodating input range of 90–264 Vac, provide 54 Vdc primary output and standby 12 Vdc for powering standby circuitry. Main output of each supply is isolated and floating, enabling positive or negative polarity operation. Units offer standard I²C or advanced PMBus communications, bidirectional output isolation, and PoE compatibility. Read More

Sensors, Monitors & Transducers

MEMS Accelerometer/Gyroscope withstands harsh environments.

November 20, 2014

Able to withstand use in automotive and industrial application environments, SCC2000 series consists of low-g, 3-axis accelerometer with 2 angular rate sensor options of X- or Z-axis detection and 32-bit digital SPI interface. Sensor has configurable, software-selectable, 10–60 Hz low pass filter, and 24-pin premolded plastic RoHS-compliant SOIC housing, suitable for SMD mounting, measures 15.00 x 12.10 x 4.35 mm. Combined sensor with gyro featuring up to 300°/sec range is also available. Read More

Electrical Equipment & Systems

Front-End AC/DC Power Supplies include 1,300 W model.

October 21, 2014

Able to deliver 1,300 W from 108–264 Vac universal input, hot pluggable D1U3CS 1300 series has no minimum load requirement and incorporates low-loss integral O-Ring FETs on main 12 V output for fault-tolerant and N+1 redundant applications. Power density is 23 W/in.³, and conversion efficiency at half full load is 92% typ. With power factor of 0.99 typ, D1U3CS-W-1300F features primary 12 Vdc output, optional 3.3 or 5.0 V auxiliary output, and active PFC. Read More

Electrical Equipment & Systems

Digital 40 A, 132 W PoL DC/DC Converter offers 97.2% typ efficacy.

September 26, 2014

Comprising non-isolated point-of-load (PoL) DC/DC converters, fully regulated OKD series measures 30.85 x 20.0 x 8.2 mm and includes through-hole, single-in-line, and SMT package options. PMBus™ interface facilitates power management, and interfacing converter to system's I²C bus allows monitoring of system-level performance requirements. Other features include digital current sharing, non-linear transient response, optimized dead time control, synchronization, and phase spreading. Read More

Electrical Equipment & Systems

DC/DC Converter suits high/low side IGBT drive applications.

May 5, 2014

Comprising 12 dual-output models, MGJ2 series can power high/low side gate drives in bridge circuits using IGBTs and MOSFETs. Encapsulated products feature basic and supplementary insulation, with isolation test voltage of 5.2 kVdc, and come in SIP format. Nominal input voltages are 5, 12, 15, and 24 Vdc, and there are 3 output voltage combinations: +15/-5 Vdc, +15/-8.7 Vdc, and +20/-5 Vdc, for each input voltage. Occupying 1.96 cm² footprint, converters have power density of 0.81 W/cm³. Read More

Electrical Equipment & Systems

DC-DC Converters meet third edition medical safety standard.

April 29, 2014

Accommodating 4:1 input, NCM6 Series comes in 3 nominal input voltage ranges of 5 Vdc (4.5–9 Vdc), 12 Vdc (9–36 Vdc), and 48 Vdc (18–75 Vdc). Each variant offers 7 output voltage models. Four single output versions deliver +3.3, +5, +12, or +15 Vdc, while 3 dual output models provide ±5, ±12, or ±15 Vdc. Housed in 20.0 x 32.0 x 10.75 mm package, 6 W encapsulated converters operate from -40 to +85°C with input undervoltage lockout feature and input to output isolation of 5,200 Vdc. Read More

Electrical Equipment & Systems

Encapsulated 6 W DC/DC Converter features 4:1 input range.

April 18, 2014

Meeting 3rd edition medical safety standard, NCM6 series offers 3 nominal input voltage ranges of 5 Vdc (4.5–9 Vdc), 12 Vdc (9–36 Vdc) or 48 Vdc (18–75 Vdc). Each offers 7 output voltage models: 4 single-output versions (+3.3, +5, +12, and +15 Vdc) and 3 dual output models (+5, +12, and +15 Vdc). Along with 5,200 Vdc input to output isolation, these 20.0 x 32.0 x 10.75 mm, 6 W converters feature -40 to +85°C operating range and input undervoltage lockout.
Read More

Electrical Equipment & Systems

DC/DC Converter suits wireless backhaul, smart grid applications.

March 17, 2014

Featuring single fixed 12 Vdc/20 A output, UWQ-12/20-T48 comes in DOSA-compatible, open-frame, quarter brick, 58.4 x 36.8 x 11.7 mm package and accepts 3:1 input range of 18–60 Vdc around nominal 48 Vdc. Remote sense automatically adjusts Vout to make up for line and load losses, while trim allows ±10% of Vout. With 92% typ efficiency, converter features 2,250 Vdc input to output isolation and offers regulation that ensures output voltage does not vary beyond ±1.25% when load changes. Read More

Other Company News from
Murata Power Solutions