Company News

Nordson EFD

40 Catamore Blvd., East Providence, RI, 02914, USA

  • 800-556-3484

General Information:
Andrea Roberts
Phone: 858-204-9584
E-mail this person

Latest New Product News from
Nordson EFD

fluid & gas flow equipment, material handling & storage, packaging equipment

Jet Valve, Touch Controller accelerate precise dispensing.

February 9, 2016

Combining control, speed, and accuracy with usability-optimized touchscreen interface, piezoelectric PICO® Pµlse™ jet valve and Toµch™ controller offer end-users non-contact jet dispensing technology that promotes productivity and product quality. Jetting system delivers accurate, repeatable micro-deposits as small as 0.5 nL at 500 Hz continuous or bursts up to 1,500 Hz. Using Toµch controller, operators can set dispensing parameters to meet specific application's tolerance. Read More

health, medical and dental supplies & equipment, material handling & storage

Disposable Syringe Barrels withstand up to 356°F for 8 hours.

December 8, 2015

Featuring 30 cc capacity, Unity™ HiTemp™ Syringe Barrels come in 2 models. Standard version, able to withstand 257°F for 8 hours at up to 87 psi, can be used with all hot melt adhesives, including moisture cure PURs and SMPs. Extreme HiTemp model withstands 356°F for 8 hours at up to 100 psi. It blocks UV light between 200–500 nm and is suited for use with polyamides and other types of hot melts. Both are compatible with Nordson EFD Optimum® metal dispense tips, adapters, and end caps. Read More

material handling & storage, packaging equipment

Pneumatic Dispensing Systems provide non-contact jetting.

November 2, 2015

Providing precise, repeatable micro fluid dispensing, P-Jet handles low- to medium-viscosity fluids, while P-Dot dispenses higher viscosity fluids. P-Jet features dispensing frequencies up to 280 Hz with dispensable volume starting at 3 nL. Requiring 24 V and max fluid pressure of 87 psi to operate, both feature exchangeable nozzles and dispensing tappets to adapt to different applications. Non-contact technology ensures uniform deposits while minimizing part damage and contamination. Read More

computer hardware & peripherals, controls & controllers, fluid & gas flow equipment, material handling & storage

Jet Valve and Touch Controller dispense exact micro-deposits.

August 27, 2015

With PICO® Pµlse™ Valve and PICO Toµch™ Controller, Jet Dispensing System can dispense repeatable micro-deposits as small as 0.5 nL at up to 500 Hz continuous, with 1,500 Hz bursts. Non-contact jet valve's modular design makes it possible to jet low- to high-viscosity fluids onto any surface, including uneven and tough-to-reach substrates. Providing touchscreen interface, controller lets users set extremely precise operating parameters. Pulse time can be adjusted in increments as small as .01 ms. Read More

fluid & gas flow equipment

Needle Valve features quick release technology.

June 29, 2015

Measuring 2.60 x 0.93 in., xQR41 Series MicroDot™ Needle Valve features Quick Release clasp that allows removal of fluid body to replace wetted parts in seconds. Pneumatically operated, adjustable valve applies precise micro-deposits as small as 150 µm of low- to high-viscosity fluids onto substrate. With exchangeable modular design, valve can be configured with stroke adjustable or non-adjustable cap, BackPack™ valve actuator, low-profile mounting block, and 90° air and fluid inlet fittings. Read More

material handling & storage

Automated Fluid Dispensing Systems offer closed-loop encoding.

October 8, 2014

Designed to integrate into any manufacturing operation, PRO Series has smart vision CCD camera that captures detailed component part images and converts them into high-resolution digital files. PRO4L Series also includes laser height sensing that detects height variations on surface of product and makes corrections to dispensing height to prevent uneven deposits and tip/workpiece damage. With on-screen preview of dispensing path, DispenseMotion software facilitates set-up and programming. Read More

material handling & storage, packaging equipment

Clear, Flexible Piston reduces bounce for consistent dispensing.

August 5, 2014

Used to achieve consistent results when dispensing viscous fluids, Optimum® Clear Flex Piston is made from pliable material that allows inserted flexing under pressure. This creates tight seal between piston and barrel. Seal stops air from passing by piston and consequently prevents piston separation and pulsing (or bounce) during dispensing. Piston fits tightly enough into syringe barrel to maintain barrel wall wiping throughout dispensing cycle and thereby reduces fluid waste. Read More

controls & controllers

Valve Controller programs radial spray and spinner systems.

July 14, 2014

Featuring microprocessor circuitry that provides exact time control of dispense cycle, 7160RA ValveMate™ Controller offers intuitive way to program 782RA internal Radial Spray Valve and 7860C-RS Radial Spinner System. Spray or dispense valve open time can be adjusted in increments as small as 0.001 seconds. For Radial Spray installations only, air pressure regulator provides low-volume, low-pressure air to nozzle, providing high transfer efficiency without overspray. Read More

material handling & storage, portable tools

Manual, Pneumatic, Cordless Guns dispense 2-component adhesives.

May 9, 2014

Manual, pneumatic, and cordless guns have ergonomic design and offer 26:1 thrust ratio that reduces operational effort while increasing adhesive dispensing with each trigger pull. Manual guns have adjustment screw for tightening drive system, while pneumatic guns, activated by air pressure, are rated up to 120 psi and feature handle on top of air cylinder. Cordless guns have Milwaukee 18 V Li-ion battery, same handle design as pneumatic gun, and speed control dial on drive mechanism. Read More

controls & controllers

Valve Controller ensures accurate and repeatable dispensing.

March 14, 2014

With intricate microprocessor circuitry, ValveMate™ 9000 ensures precise dispensing of adhesives, lubricants, and other fluids. System offers independent dual-valve control programming, each with 24 W temperature controllers for J-type thermocouples. Each channel can drive remote high-speed solenoid valve up to 500 Hz. With Auto-Increment mode, parameters can be adjusted after certain number of shots or specific elapsed time. Users can remotely program set-up parameters via host PC or PLC. Read More

fluid & gas flow equipment

Dispensing Valve improves productivity via modularity.

August 28, 2013

Suited for non-contact and contact needle dispensing of assembly fluids, PICO® xMOD™ Valve uses piezoelectric actuation technology for continuous operation at speeds of up to 500 cycles/sec. Deposits as small as 2 nL can be produced accurately at production speeds, and non-contact jet valve makes it possible to apply fluid in hard-to-access areas or onto uneven or delicate substrates. All 5 major components can be removed and exchanged within seconds, eliminating production downtime. Read More

fluid & gas flow equipment, green & clean

Dispense Valve deposits flux for photovoltaic industry.

July 17, 2013

Operating at speeds up to 500 Hz/sec, Square Wave™ 745NC deposits continuous lines of microdots on solder-coated metal ribbons that connect adjoining PV wafers. Solenoid technology minimizes process variation for repeatable dot-to-dot consistency, while low actuation speed of 2 ms prevents build-up of flux crystals on valve's nozzle which could prevent fluid from being deposited precisely on bus bar. With non-contact design, valve never touches delicate PV wafer, minimizing breakage and rejects. Read More

fluid & gas flow equipment, mechanical components & assemblies

Dispensing Tip precisely deposits thick assembly fluids.

February 6, 2008

Designed for use with air-powered dispensing equipment, 27 gauge tapered dispensing tip makes it possible to apply accurate amounts of silicones, epoxies, lubricants, and other thick assembly fluids. Silicone-free solution is molded from clear polyethylene, which will not scratch delicate surfaces, and has tapered design that promotes flow. SafetyLok(TM) threads provide safe, secure attachment, while tip produces consistent dots and lines as small 0.008 in. wide. Read More

material handling & storage, materials & material processing

Solder Dispensing Formulation suits mechanical soldering.

September 7, 2007

Designed for gap filling and application on vertical surfaces, Model SAC305 no-drip solder paste dispensing formulation wicks around metal surfaces such as silver, silver-plated, nickel, brass, and copper to produce solder joints. Featuring lead-free, no-clean formulation, product helps customers solder joint around heat tube (or heat sink) container. Read More

material handling & storage

Flexible Dispense Tips access hard-to-reach areas.

October 5, 2006

Ultra® PP dispense tips, featuring flexible polypropylene shafts, are suited for working with scratch-prone substrates. Used with air-powered benchtop dispensers or automated dispense valves, products ensure trouble-free application of adhesives, lubricants, and other assembly fluids. Available in ½ or 1½ in. lengths, tip come with IDs from .054-.010 in. Color-coded hubs feature SafetyLok(TM) threads for secure attachment to syringe barrels or dispense valves. Read More

material handling & storage

Dispensing Station prevents variations in adhesive deposits.

September 22, 2006

Using precisely timed air pulse to determine amount of material to be dispensed, Model Ultra® 2415 Workstation is designed to deposit identical amount of adhesive on every assembly. Cyanoacrylate or super glue is dispensed from syringe barrel that can be hand-held or mounted on optional arm. Features include 0-15 psi pressure regulator, microprocessor-based digital timer, and simultaneous digital display of all dispensing parameters. Read More

controls & controllers

Control System minimizes variability of fluid temperatures.

August 3, 2006

Used with benchtop dispensers and automated dispense valves, ProcessMate(TM) 6500 eliminates temperature fluctuations in assembly fluids that can cause variations in shot size, viscosity, and pot life when dispensing solder pastes and thermal-cure epoxies. System maintains precise temperature control within ±0.10°C across operating range of 10-40°C. It is available with static-dissipative enclosures for automated, handheld, benchtop, and cartridge dispensing applications. Read More

chemical processing & waste management, laboratory and research supplies & equipment

Benchtop Centrifuge removes bubbles from assembly fluids.

March 28, 2006

Used with prepackaged or user-loaded syringes, ProcessMate(TM) 5000 purges medium- to high-viscosity fluids like epoxies, greases, and silicones of bubbles and air pockets that can affect shot-to-shot consistency in pneumatic dispensing processes. Unit purges up to four 3, 5, 10, or 30 cc syringes at a time. Centrifuge includes on-off switch, timer, tachometer, locking lid, and electric brake that quickly stops rotor before lid is opened. Read More

materials & material processing

Solder Paste suits multiple-step component assembly.

September 16, 2005

High-temperature, lead-free Type SN89/SB10.5/CU0.5 features solidus temperature of 242°C, 22°C delta above SAC. It exhibits tensile strength of 12,000 psi and has pasty range of 21°C from 263-242°C, which minimizes tombstoning. Available in all flux systems and alloy types II, III, IV, and V, dispensing and printing paste is suited for multi-step assembly where component will later be attached to PCB using SAC alloy. Read More

fluid & gas flow equipment

Dispense Valve applies cyanoacrylate adhesives.

January 14, 2005

Pneumatically-operated 752 Series applies consistent amounts of adhesives and other assembly fluids on automated production lines. Fast, clean cutoff after each shot eliminates dripping, waste, and cosmetic damage to parts. Amount of cyanoacrylate dispensed is determined by fluid pressure, flow rate, and valve open time. Adjustable stroke control allows flow rate to be fine-tuned, while valve open time is regulated with microprocessor-based VALVEMATE(TM) controller. Read More

Other Company News from
Nordson EFD