Company News

Esco Tool

75 October Hill, New England Industrial Park, Holliston, MA, 01746, USA

  • 800-343-6926

Latest New Product News from
Esco Tool

Material Handling & Storage

Boiler Tube Weld Alignment Clamp is made of high strength steel.

Jul 19, 2017

HOG TIE® Boiler Tube Weld Alignment Clamp comes with wrench, socket, four 0.5 in. bolts, two spare through-hole inserts, two spare threaded inserts and metal carrying case. Unit is available in 11 sizes for pipe and tube from 1.125” to 3.25” O.D. Product consists of one side with two through-holes and matching side with threaded inserts.

Read More

Machinery & Machining Tools, Portable Tools

Flange Hog 110® Tool is equipped with two interchangeable cross feeds.

May 19, 2017

Flange Hog 110® features worm gear for producing continuous spiral finish. Suitable for re-facing variety of flange materials such as cast iron, carbon steel, stainless steel and aluminum, unit delivers alignment accuracy of 0.005 in. Operated with I.D. clamping system and 1 to 10 I.D. range for providing facing diameter up to 14 in. Product is offered with sturdy carrying case, wrenches,... Read More

Machinery & Machining Tools

Millhog Rolling Motors and Tube Expanders feature torque control setting.

Jan 13, 2017

Providing precise torque control from 25 to 325 ft.-lbs, Millhog® Rolling Motors and Tube Expanders are available with 90, 190 and 280 RPM motors. Featuring wide selection of adapters and universal pivoting extensions, products used for rolling tubes from 3/8 in. to 4-1/2 in. O.D. Provided with torque control setting, units create uniform and tight mechanical seal.

Read More

Material Handling & Storage, Welding Equipment & Supplies

Boiler Tube Joint Alignment Tool helps minimize weld failure.

Jul 28, 2016

Made of precision machined high strength steel, Esco HOG TIE® Boiler Tube Weld Alignment Clamp rapidly and accurately aligns boiler tube ends to minimize risk of failure from misalignment when welding water wall boiler tubes. One side has 2 through-holes and other has threaded inserts which accept 2 bolts that draw them together, exposing tube ends for tack welding before removal to finish... Read More

Machinery & Machining Tools

Polypropylene Coating Removal Beveler Kit peels pipe insulation.

Jul 05, 2016

Designed to fit on MILLHOG® Dictator pipe beveling machine, IMPP Removal Kit enables accelerated and clean removal of injection molded polypropylene (IMPP) insulation from pipe in preparation for welding. Series of blades peel IMPP back up to 12 in. from pipe face, and angle of bevel for insulation (60°) improves adhesion during reapplication of polypropylene coating. Developed... Read More

Architectural and Civil Engineering Products, Machinery & Machining Tools, Services

Pneumatic Saw precisely trims concrete pilings.

Apr 28, 2016

Featuring 14 in. fiberglass reinforced blade with 5 in. cutting depth, MILLHOG® Air Powered Saw mounts onto WrapTrack® System that clamps around 6–60 in. dia pile using stainless steel bands. Trolley mounts onto track and supports saw as it smoothly glides around on V-grooved, stainless steel wheels, and operator score cuts around piling to achieve clean, square... Read More

Machinery & Machining Tools

Portable Tube Beveler lets users fit-up panels anywhere.

Jan 11, 2016

Able to operate up to 1 hr with its 6.2 Ah, 18 V rechargeable battery, ESCO Mongoose MILLHOG® self-centering, ID clamping, right angle drive tool can bevel, face, and bore simultaneously. Cutter head can also be supplied for membrane and overlay removal. Ready to fit-up boiler tube panels almost anywhere, this narrow-body tool, suited for 5/8 in. ID to 3 in. OD tubes, requires 2.25... Read More

Machinery & Machining Tools, Portable Tools

Beveling Tool compound bevels large heavy-wall pipe.

Dec 28, 2015

Featuring 3-blade tool holder and formed TiN coated blades that dissipate heat away from pipe’s surface, MILLHOG® Dictator Pipe Machining Tool can perform 37 ½ x 10 degree bevel or any other angle simultaneously. Unit securely mounts to inside diameter of heavy-wall pipe from 4.5–18 in. ID using 3 wide clamps with hardened steel contact points. Equipped with 3 hp air motor, tool... Read More

Machinery & Machining Tools

Pipe Beveling Tool assures proper weld end alignment.

Aug 07, 2015

With Commander MILLHOG® Pipe Beveling Tool, users can machine heavy-wall, highly alloyed pipe from 3.75 in. ID to 14 in. OD, including Super Duplex and P-91. Optional 3-blade holder enables tool to bevel, face, and bore simultaneously, assuring uniform inside bore and smooth face and bevel for proper pipe end alignment. Capable of performing any angle of end-prep including 37... Read More

Machinery & Machining Tools, Portable Tools

Pipe Beveling Tool features bevel, face, and bore blade holder.

Jun 29, 2015

Offered in air- and electric-powered models, Prepzilla MILLHOG® machines 1.5 in. ID to 8.625 in. OD pipes using 8 sets of clamps and one mandrel. Rigid 3-blade holder bevels, faces, and bores in one operation and ensures smooth transfer when matching 2 different pipe schedules. Able to produce end preps at any angle without cutting oils, ID clamping tool features dual-opposed... Read More

Machinery & Machining Tools, Portable Tools

Tube and Pipe Beveler preps small bore heavy wall tubes.

May 29, 2015

Developed for machining highly alloyed tubes, ESCO C-HOG MILLHOG® O.D. Clamping End Prep Tool features rugged clamp that mounts onto outside of tube, evenly distributing holding power to assure chatter-free end prep. Tool is 1 ¾ in. wide to fit in tight areas and is equipped with 1.07 hp pneumatic motor that runs at 130 rpm. Capable of prepping tube and pipe from ½–3 in. O.D., tool... Read More

Machinery & Machining Tools, Portable Tools

Fin Removal Tool accelerates use via rack and pinion feed.

Apr 09, 2015

ID-clamping and self-centering, Fin MILLHOG® Tube fin Removal Tool is powered by 1.25 hp pneumatic motor and is capable of peeling back 4 in. fin from tube OD in <2 min. Rack and pinion feed offers side ratcheting, and blade cleanly separates fin from tube. Available for left- or right-hand spirally wound fins, portable tool mounts rigidly, has no torque reaction to... Read More

Machinery & Machining Tools

Electric Pipe Beveling Tool end preps where air isn't available.

Sep 11, 2014

Able to perform any angle of prep, including compound bevels and J-preps, ESCO MILLHOG® Mini Electric Pipe Beveling Tool features 1,800 W, 110/230 Vac, 40–60 Hz motor and self-centering draw rod mechanism that rigidly mounts into tube or pipe ID. Portable tool utilizes wedge-lock blade locking system and pulls thick chip without oils. Suitable for boiler tubes and pipes from 1¼ ID... Read More

Machinery & Machining Tools, Portable Tools

Beveling Tools come in battery and electric models.

Jul 21, 2014

Available in 950 W electric motor model as well as rechargeable 18 V battery-powered model for portability, ESCO Mongoose MILLHOG® Tools require just 2.25 in. clearance for beveling tube and pipe from 5/8 in. ID to 3 in. OD. Self-centering, right angle drive ID clamping tools feature TiN-coated cutter blades that mount securely in wedge-style blade locking system. Radical chip breaker directs... Read More

Machinery & Machining Tools

Bolt Seat Resurfacing Tool ensures tight steam turbine cover fit.

Apr 03, 2014

Offered in pneumatic, electric, and battery powered configurations, ESCO MILLHOG® BSR Tool uses cutting head equipped with 3 flat-face, TiN-coated blades to cleanly remove corrosion from and resurface turbine shell diaphragm retainer bolt holes. Portable tool, suitable for all surfaces subjected to corrosion, can remove metal up to 1.5 in. deep and is capable of 0.001... Read More

Machinery & Machining Tools

Pipe Beveling Tool End preps offshore piping systems.

Jan 30, 2014

Designed for dry-cutting high-temperature, high-pressure pipe from 4.5–18 in. OD, MILLHOG® Dictator Welding End Prep Tool features 3 hp air motor designed for operation in environments that have dirty air and high moisture content. ID clamping pipe milling machine develops 4,100 lb-ft torque at cutter blade and pulls continuous thick chips without cutting oils. TiN-coated blades dissipate... Read More

Machinery & Machining Tools, Portable Tools

Welding End Prep Tool features battery-powered design.

Dec 23, 2013

Available with rechargeable 18 V Lithium Ion battery pack, Tube Weasel Battery MILLHOG® is suited for use anywhere air or electricity is not available. Right angle drive ID clamping tool employs wedge-style blade locking system and TiN coated cutter blades to perform clean end preps without cutting oils. Featuring 3 clamps which fully contact mandrel and expand inside tube, product is suited... Read More

Machinery & Machining Tools, Material Handling & Storage, Portable Tools

Electric OD Clamping End Prep Tool features 950 W motor.

Sep 16, 2013

With ½–2 ½ in. working range, ESCO Electric C-MILLHOG® OD Clamping End Prep Tool is suitable for prepping stainless steel and most hard-to-machine alloys. Clamp grips tubing from outside, evenly distributing holding power, to ensure chatter-free, precision end prep on both thin- and heavy-wall tubes. Suited for use on high-purity piping systems requiring 37½° bevels, flat-facing,... Read More

Machinery & Machining Tools, Mounting & Attaching Products

Safety Chain Lanyard helps operators align heavy tools.

Jun 26, 2013

MILLHOG® ET-800 Dual Spring Hanger features 48 in. long safety chain, secured into milled slots on two 8 in. wide x 3/8 in. top and bottom steel plates. Chain is retained by welded covers and rated for 4,500 lb, while each of unit's drawbar springs is rated at 610 lb. Product is designed to limit travel of springs to 3.5 in. and prevent bottoming out, breakage, and personal injury while moving... Read More

Machinery & Machining Tools, Portable Tools

Beveling Tool Head removes boiler tube membrane and overlay.

Sep 10, 2012

Available to fit MILLHOG® end prep tools covering tube range from 7/8-3 in. OD, ESCO Membrane and Overlay Removal Head features proprietary inserts shaped like golf tees, rather than screws, that tap into place and can be rotated to utilize 360° cutting edge. As head rotates, holding forces of inserts are multiplied, which minimizes vibration and heat. Head can also hold beveling blade. Read More

Other Company News from
Esco Tool