Rex-Cut Abrasives

Cotton Fiber Finishing Sticks match openings and holes.
Mechanical Components and Assemblies

Cotton Fiber Finishing Sticks match openings and holes.

Designed for deburring and finishing precision cast or machined parts, Rex-CutÂ-® Cotton Fiber Finishing Sticks are made from reinforced nonwoven cotton fiber with aluminum oxide or silicon carbide abrasives, which are pressed and bonded together into different profile shapes and sizes. Units come in 1/8–1 in.Â- dia round and square sizes in 4–6 in.Â- lengths, with grain sizes...

Read More »
Abrasive Products operate on SS, aluminum, and exotic alloys.
Fluid & Gas Flow Equipment

Abrasive Products operate on SS, aluminum, and exotic alloys.

Megabrite(TM) Non-Woven Abrasives include unitized Type 1, convolute, and Type 27 wheels, mounted points and their finishing flap discs. They are manufactured by compressing non-woven synthetic fiber material with resin and abrasive grains. Open structured products are offered in soft to hard densities (2-9) and coarse to very fine grit. Flap discs blend and finish weld in one operation, and...

Read More »
Abrasive Wheels grind and sand fiberglass.
Architectural & Civil Engineering Products

Abrasive Wheels grind and sand fiberglass.

Available in coarse, medium, fine, and very-fine grades, Sigma-Screen(TM) Multipurpose Discs are depressed center, Type 27 abrasive wheels that feature blend of zirconia-ceramic abrasive grains bonded to flexible mesh. Chatter-free discs will not clog and can be stacked on grinder for extended life. In addition to fiberglass, 4.5 in. diameter wheels are also effective on stainless steel, metals,...

Read More »
Abrasive Wheels grind, blend, and cut stainless steel.
Fluid & Gas Flow Equipment

Abrasive Wheels grind, blend, and cut stainless steel.

Rex-cutÂ-® Stainless Steel Kit includes four 0.045 in. thick Alpha-Green cut-off wheels capable of cutting pipe, rod, or tube; one Sigma-Green grinding wheel that aggressively removes heavy welds with chatter-free operation; and one cotton-fiber blending and finishing wheel that reveals fresh abrasives as it works, producing 32 rms or better finish. Designed to work with right-angle grinders,...

Read More »
Abrasive Wheel removes light welds, burrs, rust, and paint.
Fluid & Gas Flow Equipment

Abrasive Wheel removes light welds, burrs, rust, and paint.

Suitable for industrial fabrication and maintenance purposes, Sigma Screen(TM) depressed center Type 27 wheel with 4.5 in. dia features blend of zirconia-ceramic abrasive grains bonded to flexible mesh for grinding, blending, and finishing applications. Cool-running, chatter- and clog- free mesh wheel is available with coarse, medium, and fine grits. Several wheels can be stacked onto grinder and...

Read More »
Type 1 Abrasive Wheels for Parts Rework, Tool and Mold Repair
Fluid & Gas Flow Equipment

Type 1 Abrasive Wheels for Parts Rework, Tool and Mold Repair

A full line of cotton reinforced T1 abrasive wheels that can last up to three times longer than unitized wheels, depending upon the application, is available from Rex-Cut Products, Inc. of Fall River, Massachusetts. Rex-CutÂ-® Type 1 Abrasive Wheels are constructed from layers of cotton fiber which are impregnated with aluminum oxide or silicon carbide abrasives and then pressed and bonded...

Read More »
Fluid & Gas Flow Equipment

Mounted Points Kit lets user match abrasive application.

Packaged in plastic storage box, Mounted Point Combi Kit includes resin bonded cotton fiber mounted points for deburring, latex bonded cotton fiber units for light deburring and polishing, and soft unitized synthetic fiber mounted points for high polishing. Each cotton fiber or unitized mounted point is impregnated with aluminum oxide or silicon carbide abrasive, which is bonded and compressed...

Read More »
Fluid & Gas Flow Equipment

Mounted Abrasive Points reach deep into cavities.

Suited for repair of molds, tools, and dies, Rex-CutÂ-® Mounted Points provide controlled grinding action by constantly revealing fresh abrasives. They are made with multiple layers of non-woven cotton fiber and aluminum oxide or silicon carbide abrasive grains that are pressed and bonded into barrel, bullet, and round shapes. Offered with choice of grit sizes and hard or soft bonds, points...

Read More »
Fluid & Gas Flow Equipment

Abrasive Grind and Blend Kit removes heavy welds.

Rex-CutÂ-® Grind and Blend Kit includes Sigma Green wheel with zirconia-ceramic grain and proprietary bonding to aggressively grind-out cracks and remove welds. It also features Cotton Fiber Type 27 blending and finishing wheel, which leaves 32 RMS or better finish on stainless steel and also works on aluminum. Packaged in clamshell, kit's two 4Â-½ in. dia wheels are offered with or...

Read More »
Cotton Fiber Discs grind and finish aluminum in one step.
Cleaning Products & Equipment

Cotton Fiber Discs grind and finish aluminum in one step.

Non-loading Rex-CutÂ-® Quick Change Discs are constructed with multiple layers of non-woven cotton fiber impregnated with aluminum oxide or silicon carbide grains. For use on flat or contoured surfaces, construction ensures products constantly reveal fresh abrasives as they grind. Discs, offered in 1, 1Â-½, 2, and 3 in. sizes, are rigid enough to get into corners and are available with...

Read More »
Cotton Fiber Finishing Sticks match openings and holes.
Mechanical Components and Assemblies

Cotton Fiber Finishing Sticks match openings and holes.

Designed for deburring and finishing precision cast or machined parts, Rex-CutÂ-® Cotton Fiber Finishing Sticks are made from reinforced nonwoven cotton fiber with aluminum oxide or silicon carbide abrasives, which are pressed and bonded together into different profile shapes and sizes. Units come in 1/8–1 in.Â- dia round and square sizes in 4–6 in.Â- lengths, with grain sizes...

Read More »
Company News

Specialty Abrasives Catalog Introduces New Blending and Polishing Wheels

Their new 2011-2012 catalog of specialty abrasive products for grinding, deburring, blending, and finishing stainless steel, aluminum, exotic metals, and mild steel is being offered by Rex-Cut Products, Inc. of Fall River, MA. The Rex-CutÂ-® 2011-2012 Specialty Abrasive Products Catalog features a wide range of products including cotton fiber mounted points and wheels, Type 1 cotton fiber...

Read More »
Abrasive Products operate on SS, aluminum, and exotic alloys.
Fluid & Gas Flow Equipment

Abrasive Products operate on SS, aluminum, and exotic alloys.

Megabrite(TM) Non-Woven Abrasives include unitized Type 1, convolute, and Type 27 wheels, mounted points and their finishing flap discs. They are manufactured by compressing non-woven synthetic fiber material with resin and abrasive grains. Open structured products are offered in soft to hard densities (2-9) and coarse to very fine grit. Flap discs blend and finish weld in one operation, and...

Read More »
Company News

Specialty Abrasive Products Catalog for Grinding, Blending and Finishing Applications

A new product catalog that features a wide range of products for grinding, blending, and finishing applications, and celebrates their 80th year in business, is being offered by Rex-Cut Products, Inc. of Fall River, MA. The Rex-CutÂ-® 2008-2009 Specialty Abrasive Products Catalog features a full range of products for grinding, blending, and finishing stainless steel, aluminum, mild steel,...

Read More »
Abrasive Wheels grind and sand fiberglass.
Architectural & Civil Engineering Products

Abrasive Wheels grind and sand fiberglass.

Available in coarse, medium, fine, and very-fine grades, Sigma-Screen(TM) Multipurpose Discs are depressed center, Type 27 abrasive wheels that feature blend of zirconia-ceramic abrasive grains bonded to flexible mesh. Chatter-free discs will not clog and can be stacked on grinder for extended life. In addition to fiberglass, 4.5 in. diameter wheels are also effective on stainless steel, metals,...

Read More »
Abrasive Wheels grind, blend, and cut stainless steel.
Fluid & Gas Flow Equipment

Abrasive Wheels grind, blend, and cut stainless steel.

Rex-cutÂ-® Stainless Steel Kit includes four 0.045 in. thick Alpha-Green cut-off wheels capable of cutting pipe, rod, or tube; one Sigma-Green grinding wheel that aggressively removes heavy welds with chatter-free operation; and one cotton-fiber blending and finishing wheel that reveals fresh abrasives as it works, producing 32 rms or better finish. Designed to work with right-angle grinders,...

Read More »
Company News

Specialty Abrasives Catalog Products Cut, Grind, Blend and Finish

A new catalog of specialty abrasive products for use on stainless steel, aluminum, exotic metals, and mild steel that introduces four new products is being offered by Rex-Cut Products, Inc. of Fall River, Massachusetts. The 2007 Rex-CutÂ-® Specialty Abrasives Catalog features a broad range of products for cutting, grinding, blending, and finishing stainless steel, aluminum, exotic metals, and...

Read More »
Abrasive Wheel removes light welds, burrs, rust, and paint.
Fluid & Gas Flow Equipment

Abrasive Wheel removes light welds, burrs, rust, and paint.

Suitable for industrial fabrication and maintenance purposes, Sigma Screen(TM) depressed center Type 27 wheel with 4.5 in. dia features blend of zirconia-ceramic abrasive grains bonded to flexible mesh for grinding, blending, and finishing applications. Cool-running, chatter- and clog- free mesh wheel is available with coarse, medium, and fine grits. Several wheels can be stacked onto grinder and...

Read More »
Company News

Catalog Of Specialty Abrasives For Stainless, Aluminum, Exotics And Mild Steel

A new catalog of specialty abrasive products for grinding, deburring, and finishing stainless steel, mild steel, aluminum, and exotic metals is being offered by Rex-Cut Products, Inc. of Fall River, Massachusetts. The Rex-CutÂ-® Specialty Abrasive Products Catalog describes a broad line of mounted points and wheels, cotton fiber quick change discs, Type 1 deburring wheels, stainless steel...

Read More »
Type 1 Abrasive Wheels for Parts Rework, Tool and Mold Repair
Fluid & Gas Flow Equipment

Type 1 Abrasive Wheels for Parts Rework, Tool and Mold Repair

A full line of cotton reinforced T1 abrasive wheels that can last up to three times longer than unitized wheels, depending upon the application, is available from Rex-Cut Products, Inc. of Fall River, Massachusetts. Rex-CutÂ-® Type 1 Abrasive Wheels are constructed from layers of cotton fiber which are impregnated with aluminum oxide or silicon carbide abrasives and then pressed and bonded...

Read More »

All Topics