IMS Industrial Molding Supplies
Chagrin Falls, OH 44023
New and Improved IMS Step Two Rust Stopper
February 23, 2009 Chagrin Falls, Ohio... Improved Step Two Rust Stopper is now available from IMS. IMS Company has improved the rust prevention capability of their long-known Step Two Rust Stopper. The new formula takes advantage of newer technology to provide more thorough and longer lasting rust prevention. It also avoids cost increases projected for the old formula. Improved Step Two was...
Read More »Mold Releases provide non-flammable alternatives.
Offering alternatives to EPA-banned formulas, Speed Mist Mold Releases are non-flammable and evaporate without unpleasant odors. FDA-approved, general-purpose Speed Mist 3% Silicone forms film on mold and is dry enough to leave minimal residue on part. Speed Mist Blue Label silicone spray mold release forms film on highly polished mold surfaces. Also available, Speed Mist Paintable Mist suits...
Read More »Temperature Modules control probes and heaters.
Microprocessor-based, closed-loop 15 A Models UATC-20 and S20-D3C are designed for Type J or K thermocouples and operate in automatic or manual mode. Model S20-D3C has mechanical setpoint control, while Model UATC-20 includes ground fault indicator, output power percentage on LED display, and electronic setpoint control. Both feature anti-arcing circuitry to help prevent accidental damage, open...
Read More »
Granulators process variety of plastic parts and films.
Suited for injection, extrusion, and blow molding operations, custom-built IMS SHARXX Line(TM) Granulators enable users to reclaim and reuse plastic scrap. Products are offered in 10 models and 25 sizes, which include beside-the-press models and central models with light-, medium-, and heavy-duty capacities. Machines process variety of plastics, from sprues/runners and small parts to film and...
Read More »
Gate Cutters have heavy-duty design.
Drop forged from alloy steel, Gate Cutters are precision machined and heat treated to ensure sharp, durable edges. Products are available with flat or rounded back blades and feature slim line profile and fast-acting coil spring. Both 5 and 6 in. models have bow style handles, while 6 and 7 in. flat back cutters are offered with right or left hand, ergonomic style handles or adjustable blade...
Read More »
Mold Releases are formulated to meet molders' requests.
Non-marking S-6 Silicone Spray Mold Release has 6% concentration and is effective on materials from ABS and acetal to polyester, polypropylene, and rubber. Rated USDA-H1, L-6 Paintable Lecithin Mold Release minimizes crazing and stress cracking in polyethylene. It can be used for molded parts that will be painted, plated, printed, or hot stamped. Both releases are rated USDA H-1, approved for...
Read More »
Expandable Heater Bands facilitate barrel band replacement.
HTFlex Bands(TM) replace hard-to-remove, one-piece and two-piece barrel bands. They fit 4-10 in. diameter barrels and come in widths from 1Ã-¼-4 in. in Ã-¼ in. increments. Units support operating temperatures up to 1,400Ã-
Read More »
Anti-Seize Compound is formulated for continuous use.
SAFEKOTE 60(TM) heat transfer and anti-seize compound has base carrier that remains intact at 600-°F on cartridge heaters and on threads and at 500-°F when exposed to air in heater bands. Available in 12 oz jars with brush top lid, product ensures consistent heat transfer and has anti-seize properties suited for threads on end cap bolts, screw tips, and nozzles. Even at temperatures above...
Read More »
Aerosols provide mold release and lubrication.
Economy Silicone-55L Mold Release contains 5% silicone concentration. It does not contain CFC's, HCFC's, Class 1 or Class 2 substances and can be used for food-packaging applications. Heat-resistant Die Makers Lubricant-L, with TeflonÃ-®, is blended to not dry and to minimize bleeding out with ejector pins, knockouts, slides, cams, and all moving parts. TeflonÃ-® additive minimizes...
Read More »
Mold Chillers minimize temperature variations.
TrueTon(TM) Air Cooled Mold Chillers and TwinPak Air Cooled Mold Chillers provide one full ton of cooling with 44Ã-
Read More »IMS Company Launches Complete Redesign of Its Website
IMS Company goes live with its completely redesigned website reflecting industry standards. By simplifying the website layout and increasing the depth of functionality, users will experience a more intuitive layout for easy navigation, faster request processing, in-depth product categorization, and a simplified order and check out experience. A noticeable difference can be noted from the homepage...
Read More »
New and Improved IMS Step Two Rust Stopper
February 23, 2009 Chagrin Falls, Ohio... Improved Step Two Rust Stopper is now available from IMS. IMS Company has improved the rust prevention capability of their long-known Step Two Rust Stopper. The new formula takes advantage of newer technology to provide more thorough and longer lasting rust prevention. It also avoids cost increases projected for the old formula. Improved Step Two was...
Read More »IMS Company Announces New SMARTFLOW-® Distribution Program
May 13, 2008 Chagrin Falls, Ohio... IMS Company is pleased to announce the addition of SMARTFLOWÃ-® Injection Molding Accessories to their catalog of injection molding equipment and supplies. As a factory-authorized distributor, IMS Company staff are trained in the application and specification of Smartflow products. The addition of the Smartflow product line will further enhance the...
Read More »Ims Company Launches New Web Site With 17,000 Products And Expanded E-Commerce Functionality
Chagrin Falls, Ohio / On April 3, 2006, IMS Company unveiled its new web site--imscompany.com--featuring streamlined navigation, expanded product selection, and improved search functions, along with other additions and improvements. The expanded product database contains 17,000 product listings, thousands more than the previous web site. Improved search capability makes locating the right...
Read More »Mold Releases provide non-flammable alternatives.
Offering alternatives to EPA-banned formulas, Speed Mist Mold Releases are non-flammable and evaporate without unpleasant odors. FDA-approved, general-purpose Speed Mist 3% Silicone forms film on mold and is dry enough to leave minimal residue on part. Speed Mist Blue Label silicone spray mold release forms film on highly polished mold surfaces. Also available, Speed Mist Paintable Mist suits...
Read More »Temperature Modules control probes and heaters.
Microprocessor-based, closed-loop 15 A Models UATC-20 and S20-D3C are designed for Type J or K thermocouples and operate in automatic or manual mode. Model S20-D3C has mechanical setpoint control, while Model UATC-20 includes ground fault indicator, output power percentage on LED display, and electronic setpoint control. Both feature anti-arcing circuitry to help prevent accidental damage, open...
Read More »
Granulators process variety of plastic parts and films.
Suited for injection, extrusion, and blow molding operations, custom-built IMS SHARXX Line(TM) Granulators enable users to reclaim and reuse plastic scrap. Products are offered in 10 models and 25 sizes, which include beside-the-press models and central models with light-, medium-, and heavy-duty capacities. Machines process variety of plastics, from sprues/runners and small parts to film and...
Read More »
Gate Cutters have heavy-duty design.
Drop forged from alloy steel, Gate Cutters are precision machined and heat treated to ensure sharp, durable edges. Products are available with flat or rounded back blades and feature slim line profile and fast-acting coil spring. Both 5 and 6 in. models have bow style handles, while 6 and 7 in. flat back cutters are offered with right or left hand, ergonomic style handles or adjustable blade...
Read More »
Mold Releases are formulated to meet molders' requests.
Non-marking S-6 Silicone Spray Mold Release has 6% concentration and is effective on materials from ABS and acetal to polyester, polypropylene, and rubber. Rated USDA-H1, L-6 Paintable Lecithin Mold Release minimizes crazing and stress cracking in polyethylene. It can be used for molded parts that will be painted, plated, printed, or hot stamped. Both releases are rated USDA H-1, approved for...
Read More »
Expandable Heater Bands facilitate barrel band replacement.
HTFlex Bands(TM) replace hard-to-remove, one-piece and two-piece barrel bands. They fit 4-10 in. diameter barrels and come in widths from 1Ã-¼-4 in. in Ã-¼ in. increments. Units support operating temperatures up to 1,400Ã-
Read More »