Tru Corporation

RF Coaxial Connectors feature finger-safe design.

RF Coaxial Connectors feature finger-safe design.

Quick-release TRU QRM Series Connectors feature recessed female contacts and dielectric at tip of male contacts to protect users. They handle high power applications up to 6,000 W at 100 MHz and DC to 4.0 GHz frequency range. Rated for 50 ohm impedance and 2,600 V, units feature nickel-plated brass bodies, silicone rubber gaskets, PTFE insulators, gold-plated brass center contacts, and...

Read More »
RF Coaxial Connectors feature finger-safe design.

RF Coaxial Connectors feature finger-safe design.

Quick-release TRU QRM Series Connectors feature recessed female contacts and dielectric at tip of male contacts to protect users. They handle high power applications up to 6,000 W at 100 MHz and DC to 4.0 GHz frequency range. Rated for 50 ohm impedance and 2,600 V, units feature nickel-plated brass bodies, silicone rubber gaskets, PTFE insulators, gold-plated brass center contacts, and...

Read More »
RF Coaxial Connectors have center contacts.
Construction Equipment and Supplies

RF Coaxial Connectors have center contacts.

Suited for military and commercial applications, LC Series connectors feature female with closed-slot center contact and male version with rounded center pin. They are available as straight thru or right angle plugs and female receptacles, and as between series adapters. Rated for 50 ohm impedance, DC to 1 GHz, and 5,000 V, they are constructed with brass body, beryllium-copper female contact,...

Read More »
RF Coaxial Connectors have center contacts.
Construction Equipment and Supplies

RF Coaxial Connectors have center contacts.

Suited for military and commercial applications, LC Series connectors feature female with closed-slot center contact and male version with rounded center pin. They are available as straight thru or right angle plugs and female receptacles, and as between series adapters. Rated for 50 ohm impedance, DC to 1 GHz, and 5,000 V, they are constructed with brass body, beryllium-copper female contact,...

Read More »
Strain Relief Clamp prevents twisting/flexing problems.
Construction Equipment and Supplies

Strain Relief Clamp prevents twisting/flexing problems.

SR-Series Clamp Attachment fits onto back end of RF coaxial connectors to reinforce cable assemblies subjected to excessive twisting and flexing. Product features rolling clamp nut design that provides axial and rotational support and prevents distortion of cable caused by over-tightening. Suited for cables from -¼-¾ in. OD, product is fully compatible with RG214, RG393, and RG217 connectors...

Read More »
Strain Relief Clamp prevents twisting/flexing problems.
Construction Equipment and Supplies

Strain Relief Clamp prevents twisting/flexing problems.

SR-Series Clamp Attachment fits onto back end of RF coaxial connectors to reinforce cable assemblies subjected to excessive twisting and flexing. Product features rolling clamp nut design that provides axial and rotational support and prevents distortion of cable caused by over-tightening. Suited for cables from Â-¼-¾ in. OD, product is fully compatible with RG214, RG393, and RG217...

Read More »
EIA Connectors are offered in 7/8 and 1 5/8 in. sizes.
Construction Equipment and Supplies

EIA Connectors are offered in 7/8 and 1 5/8 in. sizes.

Suited for use with flexible coaxial cables with ODs from 0.5-1.2 in., power connectors feature silver-plated, beryllium-copper inner conductors with Teflon-® dielectrics and nickel- or silver-plated bodies. Supplied as straight and right-angle plugs, receptacles, and jacks, products operate at frequencies from dc to 3,000 MHz. Characteristics include peak power rating of 132 kW, average power...

Read More »
EIA Connectors are offered in 7/8 and 1 5/8 in. sizes.
Construction Equipment and Supplies

EIA Connectors are offered in 7/8 and 1 5/8 in. sizes.

Suited for use with flexible coaxial cables with ODs from 0.5-1.2 in., power connectors feature silver-plated, beryllium-copper inner conductors with TeflonÂ-® dielectrics and nickel- or silver-plated bodies. Supplied as straight and right-angle plugs, receptacles, and jacks, products operate at frequencies from dc to 3,000 MHz. Characteristics include peak power rating of 132 kW, average...

Read More »
Coaxial Adapters connect equipment to Mil-C-39012 interfaces.
Construction Equipment and Supplies

Coaxial Adapters connect equipment to Mil-C-39012 interfaces.

A full range of precision RF coaxial adapters for reliably connecting test equipment such as vector network analyzers (VNAs) and Mil-C-39012 interfaces is being introduced by TRU Corporation of Peabody, Massachusetts. TRU Precision Adapters feature a 7 mm interface on one end and an SMA, Type N, TNC, HN, and SC on the other, and operate from dc to 18 GHz with a VSWR 1.10 max., depending upon the...

Read More »
Coaxial Adapters connect equipment to Mil-C-39012 interfaces.
Construction Equipment and Supplies

Coaxial Adapters connect equipment to Mil-C-39012 interfaces.

A full range of precision RF coaxial adapters for reliably connecting test equipment such as vector network analyzers (VNAs) and Mil-C-39012 interfaces is being introduced by TRU Corporation of Peabody, Massachusetts. TRU Precision Adapters feature a 7 mm interface on one end and an SMA, Type N, TNC, HN, and SC on the other, and operate from dc to 18 GHz with a VSWR 1.10 max., depending upon the...

Read More »
RF Coaxial Connectors feature finger-safe design.

RF Coaxial Connectors feature finger-safe design.

Quick-release TRU QRM Series Connectors feature recessed female contacts and dielectric at tip of male contacts to protect users. They handle high power applications up to 6,000 W at 100 MHz and DC to 4.0 GHz frequency range. Rated for 50 ohm impedance and 2,600 V, units feature nickel-plated brass bodies, silicone rubber gaskets, PTFE insulators, gold-plated brass center contacts, and...

Read More »
RF Coaxial Connectors feature finger-safe design.

RF Coaxial Connectors feature finger-safe design.

Quick-release TRU QRM Series Connectors feature recessed female contacts and dielectric at tip of male contacts to protect users. They handle high power applications up to 6,000 W at 100 MHz and DC to 4.0 GHz frequency range. Rated for 50 ohm impedance and 2,600 V, units feature nickel-plated brass bodies, silicone rubber gaskets, PTFE insulators, gold-plated brass center contacts, and...

Read More »
RF Coaxial Connectors have center contacts.
Construction Equipment and Supplies

RF Coaxial Connectors have center contacts.

Suited for military and commercial applications, LC Series connectors feature female with closed-slot center contact and male version with rounded center pin. They are available as straight thru or right angle plugs and female receptacles, and as between series adapters. Rated for 50 ohm impedance, DC to 1 GHz, and 5,000 V, they are constructed with brass body, beryllium-copper female contact,...

Read More »
RF Coaxial Connectors have center contacts.
Construction Equipment and Supplies

RF Coaxial Connectors have center contacts.

Suited for military and commercial applications, LC Series connectors feature female with closed-slot center contact and male version with rounded center pin. They are available as straight thru or right angle plugs and female receptacles, and as between series adapters. Rated for 50 ohm impedance, DC to 1 GHz, and 5,000 V, they are constructed with brass body, beryllium-copper female contact,...

Read More »
Strain Relief Clamp prevents twisting/flexing problems.
Construction Equipment and Supplies

Strain Relief Clamp prevents twisting/flexing problems.

SR-Series Clamp Attachment fits onto back end of RF coaxial connectors to reinforce cable assemblies subjected to excessive twisting and flexing. Product features rolling clamp nut design that provides axial and rotational support and prevents distortion of cable caused by over-tightening. Suited for cables from -¼-¾ in. OD, product is fully compatible with RG214, RG393, and RG217 connectors...

Read More »
Strain Relief Clamp prevents twisting/flexing problems.
Construction Equipment and Supplies

Strain Relief Clamp prevents twisting/flexing problems.

SR-Series Clamp Attachment fits onto back end of RF coaxial connectors to reinforce cable assemblies subjected to excessive twisting and flexing. Product features rolling clamp nut design that provides axial and rotational support and prevents distortion of cable caused by over-tightening. Suited for cables from Â-¼-¾ in. OD, product is fully compatible with RG214, RG393, and RG217...

Read More »
EIA Connectors are offered in 7/8 and 1 5/8 in. sizes.
Construction Equipment and Supplies

EIA Connectors are offered in 7/8 and 1 5/8 in. sizes.

Suited for use with flexible coaxial cables with ODs from 0.5-1.2 in., power connectors feature silver-plated, beryllium-copper inner conductors with Teflon-® dielectrics and nickel- or silver-plated bodies. Supplied as straight and right-angle plugs, receptacles, and jacks, products operate at frequencies from dc to 3,000 MHz. Characteristics include peak power rating of 132 kW, average power...

Read More »
EIA Connectors are offered in 7/8 and 1 5/8 in. sizes.
Construction Equipment and Supplies

EIA Connectors are offered in 7/8 and 1 5/8 in. sizes.

Suited for use with flexible coaxial cables with ODs from 0.5-1.2 in., power connectors feature silver-plated, beryllium-copper inner conductors with TeflonÂ-® dielectrics and nickel- or silver-plated bodies. Supplied as straight and right-angle plugs, receptacles, and jacks, products operate at frequencies from dc to 3,000 MHz. Characteristics include peak power rating of 132 kW, average...

Read More »
Coaxial Adapters connect equipment to Mil-C-39012 interfaces.
Construction Equipment and Supplies

Coaxial Adapters connect equipment to Mil-C-39012 interfaces.

A full range of precision RF coaxial adapters for reliably connecting test equipment such as vector network analyzers (VNAs) and Mil-C-39012 interfaces is being introduced by TRU Corporation of Peabody, Massachusetts. TRU Precision Adapters feature a 7 mm interface on one end and an SMA, Type N, TNC, HN, and SC on the other, and operate from dc to 18 GHz with a VSWR 1.10 max., depending upon the...

Read More »
Coaxial Adapters connect equipment to Mil-C-39012 interfaces.
Construction Equipment and Supplies

Coaxial Adapters connect equipment to Mil-C-39012 interfaces.

A full range of precision RF coaxial adapters for reliably connecting test equipment such as vector network analyzers (VNAs) and Mil-C-39012 interfaces is being introduced by TRU Corporation of Peabody, Massachusetts. TRU Precision Adapters feature a 7 mm interface on one end and an SMA, Type N, TNC, HN, and SC on the other, and operate from dc to 18 GHz with a VSWR 1.10 max., depending upon the...

Read More »

All Topics