Company News

Beswick Engineering Co., Inc.

284 Ocean Rd., Greenland, NH, 03840, US

  • 603-433-1188
  • 800-354-5014
Share Like Tweet Add Email

Latest New Product News from
Beswick Engineering Co., Inc.

Fluid & Gas Flow Equipment

Compression Fittings offer 1/4-28 thread for 4 mm OD tubing.

June 11, 2013

Corrosion-resistant stainless steel and brass compression fittings serve applications where metal or stiff plastic tubing is used and aggressive fluids as well as pressure and temperature extremes may be present. Assemblies are leak free due to internal ferrules and O-ring face seal design. Compression fitting intended for use with 4 mm tubing and ¼-28 threads is available; M3, M4, 10-32, M5, ¼-20, and 5/16-24 thread sizes as well as 1/16, 1/8, ¼ in. OD tubing options are also available. Read More

Fluid & Gas Flow Equipment

Pressure Regulators have output pressures from 0-30 psig.

February 23, 2009

Suited to low pressure regulation such as ½ psig, PRDHF high flow regulator weighs approximately 35 g in brass & stainless steel and about 18.2 g in aluminum. Maximum inlet supply pressure is 500 psig, and both inlet and outlet ports are tapped 10-32 UNF. PRDH8 manifold mount version weighs 52 g in brass and stainless steel, and inlet is 5/16-24 UNF external thread and outlet port is through 0.094 in. dia hole at base of regulator body. Read More

Fluid & Gas Flow Equipment, Material Handling & Storage

Diaphragm Pressure Regulators have single-stage design.

February 13, 2009

Suited for gas and pneumatic pressure regulation, PRDHF non-relieving, high-flow regulator controls output pressures from 0-30 psig. Max inlet supply pressure is 500 psig, and inlet/outlet ports are tapped 10-32 UNF. Also available, manifold-mounted PRDH8 offers features similar to PRDHF but eliminates need for fitting and tubing connections. It features 5/16-24 UNF external thread inlet, and outlet port is through 0.094 in dia hole at base of body. Read More

Electronic Components & Devices

Quick Disconnects suit space-/weight-conscious applications.

February 26, 2008

Constructed of stainless steel throughout and weighing 15 g, dry break quick disconnect connects without any fluid spray or leakage and disconnects with minimal dead volume. Internal and external ends are available with 10-32 internal or external threads and include captured o-ring seals for leak-tight connections. Panel mount versions are also available. Products suit applications where space, leak-tightness, durability, and weight are of concern. Read More

Fluid & Gas Flow Equipment, Welding Equipment & Supplies

Ball Valves are suitable for applications up to 250 psig.

January 8, 2008

Miniature ball valve are available in standard shut-off MBV-1010, 3-way diverting MBVT-1010, and 3-way mixing diverting MBVMD-1010. Stainless steel valves are customized for non-restricted flow and weigh 9 or 12 g. Mixing diverting valve allows either port to be individually selected or both ports to be simultaneously selected with no shut-off. Inlet and outlet ports are 10-32 UNF standard. Read More

Fluid & Gas Flow Equipment

Miniature Flow Control Valve has pessure-compensated design.

June 19, 2007

Available in brass with Buna-N (standard) or Viton (optional) seal material, PCFCD-1N1 works with liquids and gasses. Design maintains constant flow rate, adjustable by end-user, regardless of upstream or downstream pressure variations. Pressure regulation is accomplished with low-friction diaphragm mechanism. Weighing 48 g, valve controls flow rates of 0-4.2 gal/hr of water and 0-20 ft³/hr of air. Maximum rated inlet supply pressure is 500 psig. Read More

Fluid & Gas Flow Equipment

Slide Sleeve Valve provides on/off control of gas or liquid.

February 21, 2007

Operating in in-line configuration, ultra-miniature, M3 threaded Model M3SV-N can be attached directly in fluid circuit and does not require panel mounting. Two-way, non-venting device is 0.78 in. long from end to end with no preferred flow direction. Maximum inlet pressure is 250 psig, and approximate flow orifice is 0.024-0.028 in. diameter. Available in brass or stainless steel, valve features captured O-ring seal design for leak-tight operation. Read More

Fluid & Gas Flow Equipment

Adapter Fittings connect metric to imperial threads.

December 6, 2006

Miniature fittings adapt Imperial/English threaded components to metric threaded components. Products include M3 Internal to M5 External; M3 External to M5 External Nipple Fitting or M3 Internal Extension Fitting; and M3 External Universal Nipple Fitting. Also available are 10-32 External to M3 or M5 Internal; 10-32 Internal to M5 Internal or M6 External; and 10-32 or M5 Internal to M3 External Fittings. Additional types are available. Read More

Other Company News from
Beswick Engineering Co., Inc.

April 21, 2014

New Beswick Catalog

January 19, 2006

Exchanging Gold for Silver