Trek, Inc.
Medina, NY 14103
Share:
High-Speed Power Amp controls high-voltage outputs.
Featuring 4-quadrant, active output stage, Model 10/10B-HS provides high-speed response with slew rate greater than 700 V/Ã-µsec, output current to 40 mA peak AC, and signal bandwidth of DC to greater than 19.5 kHz (-3 dB). Solid-state product is configured as non-inverting amplifier with fixed gain of 1,000 V/V. It provides precise control of output voltages from 0 to Ã-
Read More »
High-Frequency Amplifier incorporates dual feedback design.
High-Frequency Amplifier Model 2100H offers control of output voltages from 0 to Ã-
Read More »
High-Frequency Amplifier provides dual feedback.
Featuring solid-state design, Model 2100HF controls output voltages from 0 to Ã-
Read More »ESD Detector targets manufacturing environments.
TREK Model 900 Electrostatic Discharge (ESD) Event Detector is diagnostic tool for manufacturing environments such as electronic, semiconductor, and medical device manufacturing and assembly. It includes voltage-sensitive antenna that can be positioned near potential problem areas to monitor ESD events. Detection is conveyed via audible buzzer and/or visual color-coded light display which depicts...
Read More »
Electrostatic Voltmeter features millivolt resolution.
Designed for applications that require non-contacting measurement of electrostatic voltages from mV to Ã-
Read More »Voltmeter measures voltage on ESD-sensitive devices.
Infinitron(TM) electrostatic voltmeter with hand-held probe provides contacting voltage measurements with virtually no transfer of electric charge to or from measured object. It measures site-specific voltage during handling and processing to identify and rectify problems that could result in harmful ESD events. Measurement range is 0-Ã-
Read More »
Charged Plate Monitor includes data acquisition mode.
Suited for ESD-sensitive environments, Model 157 utilizes high-impedance, high-voltage follower to monitor ion collecting plate voltage. Fast Mode provides data acquisition rate of 1 ms/data point. Storage and retrieval capability enables test data to be saved and recalled. Monitor includes digital display, manual or bar code entry/reading capability, and USB port for PC interface, which allows...
Read More »
Electrostatic Voltmeter features non-contact design.
Built to measure and monitor electrostatic charge, Model 400 incorporates vibrating reed probe sensor and noise null control potentiometer. It can be used with single chopper probe or dual chopper probe, which provides response time of less than 200 Ã-µsec for 1 kV step response with zero phase lag. There is no overshoot or undershoot when measuring step voltage changes, and measurement...
Read More »
Charged-Plate Monitor automates data collection.
Model 157 combines precision charge measurement capability with one USB serial interface to allow user to control unit from computer. With TREK software, operators can program test sequences and download test results, allowing quantitative tests to be repeated, analyzed, programmed, saved, and retrieved. Unit provides virtually infinite impedance loading of ion collecting plate, while allowing...
Read More »
High-Speed Power Amp controls high-voltage outputs.
Featuring 4-quadrant, active output stage, Model 10/10B-HS provides high-speed response with slew rate greater than 700 V/Ã-µsec, output current to 40 mA peak AC, and signal bandwidth of DC to greater than 19.5 kHz (-3 dB). Solid-state product is configured as non-inverting amplifier with fixed gain of 1,000 V/V. It provides precise control of output voltages from 0 to Ã-
Read More »
High-Frequency Amplifier incorporates dual feedback design.
High-Frequency Amplifier Model 2100H offers control of output voltages from 0 to Ã-
Read More »
High-Frequency Amplifier provides dual feedback.
Featuring solid-state design, Model 2100HF controls output voltages from 0 to Ã-
Read More »Four TREK Sales Engineers Recently Certified by Electrostatic Discharge Association
This TREK Group Represents 40% of the Individuals Certified This Year 28 February 2008, Medina, NY (USA) - TREK, INC. announces that four of the company's Sales Engineers were recently certified by the Electrostatic Discharge Association (ESDA) with the designation of ESD Certified Professional - Program Manager . The four individuals at TREK receiving certification include John Clack, Chris...
Read More »ESD Detector targets manufacturing environments.
TREK Model 900 Electrostatic Discharge (ESD) Event Detector is diagnostic tool for manufacturing environments such as electronic, semiconductor, and medical device manufacturing and assembly. It includes voltage-sensitive antenna that can be positioned near potential problem areas to monitor ESD events. Detection is conveyed via audible buzzer and/or visual color-coded light display which depicts...
Read More »TREK Scientist Accepts SEMI Role & Invitation to Speak About ESD
6 October 2006, Medina, NY: Dr. Maciej Noras, Research & Development Engineer at TREK, INC., was recently named Co-Chair of the SEMIÃ-® International Standards ESD/ESC Task Force - North America, which is part of the SEMI Metrics Global Technical Committee. He will assume the Co-Chair position at the upcoming SEMI North America Standards Autumn Meeting, being held October 15 - 20, 2006 in...
Read More »
Electrostatic Voltmeter features millivolt resolution.
Designed for applications that require non-contacting measurement of electrostatic voltages from mV to Ã-
Read More »TREK Sales Engineer Certified by the ESD Association
Tom Larson attains Certified Professional - Program Manager status, and is one of the first six individuals to receive this designation from the Electrostatic Discharge Association 24 February 2006, Medina, NY (USA) - TREK, INC. announces that Tom Larson, Sales Engineer at Trek, was recently designated an ESD Certified Professional - Program Manager by the Electrostatic Discharge Association...
Read More »Voltmeter measures voltage on ESD-sensitive devices.
Infinitron(TM) electrostatic voltmeter with hand-held probe provides contacting voltage measurements with virtually no transfer of electric charge to or from measured object. It measures site-specific voltage during handling and processing to identify and rectify problems that could result in harmful ESD events. Measurement range is 0-Ã-
Read More »