ERNI Electronics
Midlothian, VA 23112
I/O Modules support decentralized installations.
UL/CSA approved M8/M12 distribution boxes feature IP65/IP67 protected housing that withstands oil, lubricants, and vibration. M8 modules are available with 3- and 4-pin sockets, while M12 modules come with 4- and 5-pin sockets (A coded). Control level is connected by pre-assembled hybrid trunk cable, which acts as both power supply and data link for sensors and actuators connected to I/O box. All...
Read More »SMT PCB Connector enables data rates up to 10 Gbit/sec.
Featuring blind-mate design for mezzanine card applications, 1.0 mm pitch system MicroSpeed connector is available in 50 signal contact modules and is designed to be used in multiples between two parallel cards without mating issues from negative tolerance stack up. It is available in 16 different stack heights or board-to-board heights from 5-20 mm with every height in between in 1 mm...
Read More »Right Angled D-Sub Connectors feature press-fit termination.
Available with assembly height of 7.3 mm, right-angled D-sub connector can be screwed to PCB with M3 or 4 #40 UNC threads after press fitting to provide more secure attachment. Connectors are available with 9, 12, 25 or 37 pins; male contacts are gold-plated, while female contacts are tin-plated. Compliant with IEC 807-3 and DIN 41652, connectors also feature integrated locking jack screws that...
Read More »Connector System optimizes data rates.
Designed for differential, high-speed signal transmission in telecom applications, ERmet ZD+Ã-® board-to-backplane connector system enables data rates of more than 20 Gbit/s. Four-pair, right-angle female connector features pressfit termination and is mating-compatible to existing ERmet ZD male connector, so existing backplane designs do not require layout changes on backplane side. For...
Read More »Power Modules carry 6-8 A of current at 20-
MicroSpeed(TM) Power Module connectors, with 2.0 mm contact pitch, are suited for use with devices such as CPUs, drives, and LCD panels. While male versions come in 1, 2, 9, and 10 mm heights, female versions are offered in 4, 6, 8, and 10 mm heights. Series enables stacking heights from 5-20 mm, addressing every PCB arrangement requirement. It offers multiple-connector mating capability and...
Read More »Mini Cable Connector operates over -55-
Offering flexible board-to-cable connections, MiniBridge(TM) 0.050 in. pitch, single-row cable connector system comes in 4-pin version as well as variants with 2, 3, 6, and 8 poles. Suited for sensor, actuator, power-supply, and data applications, product carries up to 4 A @ 20Ã-
Read More »Power Connector meets PICMG 3.0 performance requirements.
Designated for use in Zone 1 as specified by PICMG 3.0, ATCA Power Connector is comprised of 8 size 16 contacts and 22 size 22 contacts. It uses gold over nickel plating at contact interface, and tin plating on PCB terminals. Insulation body has integrated guiding feature, and contact terminals provide compliant press-fit zones for assembly to PCB. Stamped female contacts' lead-in design,...
Read More »Power Module is compatible with 2 mm and DIN41612 connectors.
ERmet 3-pin, 12 mm wide power module uses contact material that allows handling currents of more than 18 A per contact at 20Ã-
Read More »Single-Pole Power Connectors offer press-fit termination.
Power Tap connectors have press-fit zone for evenly distributed force progression during press-in, lowering strain on board's press-fit through hole. Also offered in versions with solder pins, RoHS-compliant series exhibits max current-carrying capacity of 40 A @ 20Ã-
Read More »ERNI Electronics, Inc. Announces Plans for New Production Facility in Virginia
ERNI Electronics, Inc. announces plans to build a production and distribution facility in Chesterfield, County, Virginia Richmond, Virginia— March 11, 2019 – ERNI Electronics, Inc. announced today that it plans to build a state-of-the-art production and distribution facility in Chesterfield County, Virginia. ERNI Electronics Inc., a leading international manufacturer of electrical...
Read More »ELSA ERNI System Offers Backplane & Cable Assembly Services in Asia
Singapore 2nd December, 2010 - ERNI has set up the first Asia backplane & cable assembly factory in Beijing China: ELSA ERNI System. This enables ERNI to provide a total solution to the customer. ERNI offers a wide range of PCB press-fit connectors and cable connectors such as SMC, MiniBridge, MaxiBridge and MiniMez, each with unique design features for special applications. Beside connectors,...
Read More »I/O Modules support decentralized installations.
UL/CSA approved M8/M12 distribution boxes feature IP65/IP67 protected housing that withstands oil, lubricants, and vibration. M8 modules are available with 3- and 4-pin sockets, while M12 modules come with 4- and 5-pin sockets (A coded). Control level is connected by pre-assembled hybrid trunk cable, which acts as both power supply and data link for sensors and actuators connected to I/O box. All...
Read More »SMT PCB Connector enables data rates up to 10 Gbit/sec.
Featuring blind-mate design for mezzanine card applications, 1.0 mm pitch system MicroSpeed connector is available in 50 signal contact modules and is designed to be used in multiples between two parallel cards without mating issues from negative tolerance stack up. It is available in 16 different stack heights or board-to-board heights from 5-20 mm with every height in between in 1 mm...
Read More »Right Angled D-Sub Connectors feature press-fit termination.
Available with assembly height of 7.3 mm, right-angled D-sub connector can be screwed to PCB with M3 or 4 #40 UNC threads after press fitting to provide more secure attachment. Connectors are available with 9, 12, 25 or 37 pins; male contacts are gold-plated, while female contacts are tin-plated. Compliant with IEC 807-3 and DIN 41652, connectors also feature integrated locking jack screws that...
Read More »Connector System optimizes data rates.
Designed for differential, high-speed signal transmission in telecom applications, ERmet ZD+Ã-® board-to-backplane connector system enables data rates of more than 20 Gbit/s. Four-pair, right-angle female connector features pressfit termination and is mating-compatible to existing ERmet ZD male connector, so existing backplane designs do not require layout changes on backplane side. For...
Read More »System Technology With A Focus On SMT Production
ERNI`s System Technology Division at Productronica ADELBERG, GERMANY - November 13, 2007 - ERNI Electronics is devoting much of its coverage at this year's Productronica 2007 (hall B6, booth 161) to its range of products and services in the System Technology Division. System Technology now accounts for nearly 30% of total sales within ERNI Electronics and focuses on the development of backplanes,...
Read More »Latest Asia Pacific Bishop Survey Places ERNI Electronics in Top Position
#1 Spot in Japan and Top Scores for Product Quality, Product Catalogue and Website ADELBERG, GERMANY - August 17, 2007 - The 2007 Asia Pacific Customer Survey of the Electronic Connector Industry, conducted for the first time by market researchers Bishop & Associates, placed ERNI Electronics in the top spot in the influential Japanese market, and awarded top marks in the three major categories of...
Read More »ERNI Renamed ERNI Electronics
New Company Name Reflects Global Orientation and Comprehensive Product Portfolio ADELBERG, GERMANY - January 18, 2007 - Effective January 1st, 2007, ERNI Elektroapparate GmbH has changed its name to ERNI Electronics GmbH, thus affirming its global presence and product portfolio for the international market. Over 50 years ago, when company founder Ernst Rudolf Erni entered ERNI Elektroapparate...
Read More »ERNI Presents New Products 2007
ADELBERG, GERMANY - December 20, 2006 - ERNI has summarized its latest product highlights in a six-page color brochure in the English language. The recently developed products being presented include, for instance, the MicroSpeed Power Module, which can handle currents of up to 8 A and comes in four different assembly heights. Now, the data version of the MicroSpeed connector, too, is available...
Read More »