Company News

Erni Electronics

2201 Westwood Ave, Richmond, VA, 23230, USA

  • 804-228-4100

Latest New Product News from
Erni Electronics

Electrical Equipment & Systems, Mounting & Attaching Products

Erni’s Connectors optimize industrial automation system.

Feb 23, 2017

Available in MicroSpeed, SMC and MicroCon models, Erni’s Connectors are used in industrial control networks and motion control/drive systems. Capable of transferring up to 25 Gbps high-speed data, MicroSpeed connectors are designed in 5 mm and 20 mm heights. Offering 3 Gbps transmission rate, SMC series connectors come in 1.27 mm grid and 1.7 A current carrying capacity per contact. MicroCon... Read More

Electronic Components & Devices

Hermaphroditic Connectors feature anti-magnetic design.

May 17, 2016

Available in 12-pin single-row and 54-pin dual-row configurations, MicroStac® SMT Connectors feature 5 mm board-to-board stack height and 1.5 mm effective wipe length. Non-ferrous connectors are designed for medical and instrumentation applications such as MRI machines, where ferrous materials can be hazardous and degrade test results. With ambient temperature of 20°C and current to all... Read More

Electrical Equipment & Systems, Electronic Components & Devices, Mounting & Attaching Products

Automotive-Grade Connectors meet Koshiri Security requirements.

Dec 04, 2015

Optimized for mating integrity and protection from improper skew insertion, single-row MiniBridge™ Koshiri connectors meet Koshiri Security requirements for automotive LED/lighting applications. Scalable 1.27 mm pitch cable connector system, suited for conserving space in connections between PCBs and decentralized function units, is available with 2, 3, 4, 6, 8, 10, and 12 pins and can carry... Read More

Electrical Equipment & Systems, Electronic Components & Devices

Wire-to-Board Connectors come in dual-row version.

Nov 09, 2015

Available in vertical and right angle versions, 10-pin and 20-pin MaxiBridge™ Connectors provide current carrying capacity up to 12 A per contact on 2.54 mm grid for heavy-duty and space-saving connections. Straight and angled male connectors are fitted with SMT terminations and strain relief features, while female connector accommodates 180° cable exit with corresponding contact chambers... Read More

Electrical Equipment & Systems, Electronic Components & Devices

Three-Row Connector delivers data rates up to 25 Gbps.

Apr 28, 2015

With SMT terminals that provide contact density capable of speeds to 25 Gbps, 1.0 mm pitch MicroSpeed™ high-speed connector system comes in 3-row version. Open pin-field design, which allows for third (center) row to be selectively assigned as ground to optimize signal quality between higher speed signal conductors or rows, can accommodate differential or single-ended signals while maintaining... Read More

Electronic Components & Devices, Mounting & Attaching Products

Press-Fit Wire-to-Board Connectors provide gas-tight interface.

May 28, 2014

Available in M5, M6, M8, and M10 versions, combined flexible and massive press-fit zone BLUEcontact PowerElements are rated up to 290 A per power element at 20°C and operate over -40 to +135°C range. BLUEcontact PowerElements with purely massive press-fit terminal come in M3, M4, M5, M6, M8, and M10 versions with current carrying capacity of 10 A per pin (6–36) and operate... Read More

Electronic Components & Devices

PCB Connector System saves board space.

Apr 29, 2014

Offered in 3-, 4-, and 5-pin versions, M12 90-Degree PCB Connector System mates according to IEC 60076-2-101, and is IP67-rated in mated and locked position. Integrated PWB support pegs allow connector to be centered on PWB edge for each nominal thickness of .040, .063, and .079 in. Available with A, B, and D coding, right angle connector is suited for fill level, range, measuring, and pressure... Read More

Electrical Equipment & Systems

Hard Metric Female Connector enables data rates of 20 Gb+.

Dec 27, 2012

For optimized layout on daughter cards, ZDplus Connector combines optimal signal routing configuration with pressfit termination of female connector options. Dual beam leaf contacts, available with 40 differential pairs per linear inch, use one ground blade for every signal pair, with 2.5 mm pitch from wafer-to-wafer. In-line ground arrangement at termination and grounding shield allows for... Read More

Electronic Components & Devices

Board-to-Board Connector supports 10 Gbps speeds.

Dec 12, 2012

Featuring 1.0 mm pitch, MicroSpeed™ System is available in mezzanine, right angle, and coplanar configurations. Open pin field design can accommodate differential or single-ended signals. Added security measure for system integration is afforded by mis-mating allowances of contact design, which provides longitudinal misalignment tolerance of ±0.7 mm and angular misalignment tolerance up to... Read More

Electrical Equipment & Systems, Electronic Components & Devices

Wire-to-Board Connector targets lighting applications.

Nov 29, 2012

With 1.27 mm pitch, MiniBridge™ single row connector system is rated up to 4 A per contact. Unit is available in vertical or right angle terminations with ribbon cable or discrete wire options that are suitable for up to 24 AWG cable. Available in 2, 3, 4, 6, 8, 10, and 12 positions with air and creepage distance of 0.4 mm, connector is compatible with RoHS-compliant SMT soldering profiles.... Read More

Electrical Equipment & Systems, Electronic Components & Devices

Mezzanine Connector handles up to 1.6 A per contact.

Oct 19, 2012

Featuring hermaphroditic design that combines male and female connector halves, MicroStac® Connector incorporates 2 points of contact for applications where shock and vibration are encountered. Available in 5 mm stack height, unit offers mis-mating tolerance up to 0.7 mm of side-to-side float and ±4° of angular misalignment between connector halves and their respective PCBs. Contact... Read More

Electrical Equipment & Systems

I/O Modules support decentralized installations.

Jan 22, 2009

UL/CSA approved M8/M12 distribution boxes feature IP65/IP67 protected housing that withstands oil, lubricants, and vibration. M8 modules are available with 3- and 4-pin sockets, while M12 modules come with 4- and 5-pin sockets (A coded). Control level is connected by pre-assembled hybrid trunk cable, which acts as both power supply and data link for sensors and actuators connected to I/O box. All... Read More

Electronic Components & Devices

SMT PCB Connector enables data rates up to 10 Gbit/sec.

Jan 20, 2009

Featuring blind-mate design for mezzanine card applications, 1.0 mm pitch system MicroSpeed connector is available in 50 signal contact modules and is designed to be used in multiples between two parallel cards without mating issues from negative tolerance stack up. It is available in 16 different stack heights or board-to-board heights from 5-20 mm with every height in between in 1 mm... Read More

Electrical Equipment & Systems, Electronic Components & Devices

Right Angled D-Sub Connectors feature press-fit termination.

Jan 19, 2009

Available with assembly height of 7.3 mm, right-angled D-sub connector can be screwed to PCB with M3 or 4 #40 UNC threads after press fitting to provide more secure attachment. Connectors are available with 9, 12, 25 or 37 pins; male contacts are gold-plated, while female contacts are tin-plated. Compliant with IEC 807-3 and DIN 41652, connectors also feature integrated locking jack screws that... Read More

Electronic Components & Devices

Subminiature Connectors come in antistatic versions.

Jan 12, 2009

Available in single-row models with 6, 9, 10, 12, or 14 pins and 2-row versions with 50 or 54 pins, 0.8 mm pitch MicroStac® SMT Board-to-Board Connectors feature tilt-proof contact principle with dual side positioning of contact on PCB. Depending on connector version, board-to-board height ranges from 3.0 mm to between 5-6.5 mm. With ambient temperature of 20°C and current feed to all... Read More

Computer Hardware & Peripherals, Electronic Components & Devices

Right-angled Card Edge Connectors meet PCIe requirements.

Nov 05, 2008

Available with 36, 64, 98, or 164 pins, 1 mm centerline right-angled connectors offer board-to-board distances from 5.84-16.68 mm and are compatible with 1.6-2.4 mm thick motherboards and 1.6 mm daughter cards. Connector layout is arranged in 4-row format with 2 mm pitch and provision of 2 holes for locater pegs. Units provide solder termination with length of 2.54 mm. Available in 3 stack... Read More

Electronic Components & Devices

SMC Board-to-Board Adapter features 1.27 mm pitch.

Aug 15, 2008

Available in 12, 26 and 50 pins, SMC Board-to-Board Adapter stretches flexible mezzanine distances from 20-40 mm in 2 mm increments. Unit has male contacts on both component ends, and securely locks into standard low-profile SMT female SMC connector. Secure soldering is maintained with SMT coplanarity of less than 0.004 in. and integrated metal SMT mounting clips for mechanical stress relief.... Read More

Electronic Components & Devices

Right Angle DIN Connectors require minimal press-in force.

Aug 15, 2008

Suited for daughter card applications, right angled female DIN 41612 connectors are available in type R, R/2, and R/3 variants. Utilizing eye-of-the-needle pressfit zone minimizes press-in force as well as stress on PCB. Press-in cover enables type R female connector to be pressed in with flat rock press-in tool, without damaging contacts. RoHS-compliant through hole reflow versions are built... Read More

Electrical Equipment & Systems

Connectors deliver current carrying capacity to 18 A.

Apr 08, 2008

Including 5-, 6-, and 7-pin versions, Universal Power Module (UPM) connectors supply power in applications in line with industry standard PICMG EXP.0 CompactPCI Express. RoHS compliant units meet requirements for performance grade 1, and are compatible with other 2 mm and DIN 41612 connectors. Featuring pressfit technology, angled male multipoint connectors are designed to supply power to... Read More

Electrical Equipment & Systems, Electronic Components & Devices

Connector permanently links PCB to IDC flat cable.

Apr 08, 2008

SMC Board-on-IDC cable connector enables connection between PCB and IDC flat cable to be established using 1 connector. In process, cable is permanently attached to connector, already soldered to the PCB, by means of cable duct, and forms gas-tight connection with IDC contacts. Designed for fully-automatic SMT assembly, system includes black insulating body, high-temperature-resistant... Read More

Other Company News from
Erni Electronics