Company News

Dytran Instruments, Inc.

21592 Marilla St., Chatsworth, CA, 91311, USA

  • 818-700-7818

Latest New Product News from
Dytran Instruments, Inc.

Sensors Monitors & Transducers

IEPE Triaxial Accelerometer suits modal analysis applications.

August 7, 2009

Model 3293A consists of 3 miniature ceramic shear mode accelerometer elements mounted to single support and welded into titanium housing. Unit features low end frequency response of ±10% down to 0.25 Hz, electrical noise floor of 0.0002 kHz, and sensitivity of 500 mV/g. Available with hermetic seal, 5-40 stud mount and single 4-pin connector, it weighs 8.8 g. Labels of axes X, Y and Z are... Read More

Sensors Monitors & Transducers

Triaxial Accelerometer is designed for modal analysis.

July 29, 2009

Along with 2-wire internal IEPE electronics, Model 3023A9 contains 3 miniature quartz laminar shear mode accelerometer elements mounted orthogonally to each other to single support and welded into titanium housing. Device mounts using 10-32 tapped hole in base, has sensitivity of 1 mV/g, single connector, is hermetically sealed, and weighs only 4 g. Labels of X, Y, and Z axes are laser marked in... Read More

Sensors Monitors & Transducers

Ultra Miniature IEPE Accelerometer weighs 0.2 grams.

July 13, 2009

Designed for shock and vibration measurements, Model 3224A3 has sensitivity of 5 mV/g and can operate at temperatures up to 300°F. Unit is laser welded in titanium housing, and features integrated electronics, adhesive mount, and planar shear, ceramic design. Suitable applications include environmental stress screening, PC board vibration measurements, product response, general purpose... Read More

Sensors Monitors & Transducers

Triaxial Accelerometer is for submersible applications.

June 12, 2009

Model 3243A is miniature triaxial 10 mV/g accelerometer that features 2-meter moisture sealed integral cable, which allows sensor to be used in damp and moist conditions. With weight of 2.5 g and vertical height of 0.28 in., sensor is suited for situations where vertical space is limited. Model 3243A has adhesive mount and contains 3 miniature quartz shear mode accelerometer elements mounted to... Read More

Sensors Monitors & Transducers

Miniature Triaxial Accelerometer weighs 0.8 g only.

June 11, 2009

Featuring sensitivities of 2, 5, and 10 mV/g, 3133A series are suited for shock and vibration testing in printed circuit boards, board-mounted components, and other miniature products. With operating temperature up to +300°F, low profile unit has height of 0.23 in. and comes with 3 ft integral cable terminating to 4-pin connector. Designed for adhesive mount, triaxial IEPE accelerometer can be... Read More

Sensors Monitors & Transducers

Triaxial Accelerometer includes IEEE 1451.4 TEDS.

June 5, 2009

Designed for modal analysis applications, 3273AT series features robust, laser welded titanium design that includes ceramic sensing elements coupled to ultra low noise JFET electronics. It has low end frequency response of -10% down to 0.31 Hz and is available in sensitivities of 10, 50, and 100 mV/g. Featuring hermetic seal, adhesive mount, and single 4-pin connector, this triaxial IEPE... Read More

Sensors Monitors & Transducers

Miniature Triaxial Accelerometer is hermetically sealed.

June 1, 2009

Weighing only 3 gm, Model 3023M27 has footprint of 0.36 x 0.36 in., sensitivity of 10 mV/g, and features 4-pin radial connector. Labels of axes X, Y, and Z are laser marked in large font size on 3 orthogonal faces aiding user in orienting sensor. Adhesive mount unit is suited for use in modal analysis, noise vibration and harshness (NVH), Environmental Stress Screening (ESS), and general purpose... Read More

Sensors Monitors & Transducers

Miniature IEPE Accelerometers weigh only 0.6 grams.

May 19, 2009

Offering sensitivity of 1 mV/g, Models 3225M5 and 3225M7 ultra miniature sensors are designed for mounting in narrow spaces only slightly greater than 0.25 in. wide. They are adhesive mount and have 3-56 coaxial connector which mates with replaceable coaxial cable. Featuring titanium case, units are only 0.15 in. high and are suited for measurement of shock and vibration of very small lightweight... Read More

Sensors Monitors & Transducers

Accelerometers suit general purpose vibration applications.

April 7, 2009

Models 3255C and 3256C charge mode accelerometers are intended for general purpose vibration applications under high temperatures. They exhibit 15 pC/g sensitivity and feature robust, laser welded titanium construction that includes ceramic sensing element. Both are hermetically sealed, weigh only 10 grams, and have 10-32 mounting hole. Model 3255C has 10-32 radial connector and Model 3256C has a... Read More

Sensors Monitors & Transducers, Test & Measuring Instruments

Vibration Measurement System withstands high temperatures.

April 3, 2009

Model 5334 includes high-temperature charge mode accelerometer, connected to input of in-line miniature differential charge amplifier via 18 in. hard line cable. Amplifier operates from constant current 2-wire IEPE power unit. Device features case-isolated design to avoid ground loops and hermetic sealing for resistance to moisture/dirt. It also features 3-bolt mount, SS construction and utilizes... Read More

Sensors Monitors & Transducers

Dynamic Pressure Sensor targets variety of industrial uses.

March 24, 2009

Model 2006V2 sensor is acceleration compensated, which minimizes effects of vibration on output signal. Hermetically sealed unit features IEPE wiring configuration as well as 2-pin Mil-C-5015 connector and ¼-18 NPT standard pipe thread mount. It offers sensitivity of 50 mV/psi, and 316L SS housing and diaphragm are electrically isolated from power ground. Applications include industrial... Read More

HVAC, Sensors Monitors & Transducers, Test & Measuring Instruments

Pressure Sensors suit field blast and shock tube application.

March 20, 2009

Featuring 1 µsec of rise time and acceleration compensation, 2301C series probe-type pressure sensors are designed to measure very fast pressure transients. Hermetically sealed units have sensitivity of 0.35 pC/psi and consist of 6 different full scale range models, from 100-15,000 psi. They are operational in temperatures up to +500°F. Read More

Sensors Monitors & Transducers

Triaxial Accelerometer suits modal analysis applications.

March 12, 2009

Offering sensitivity of 100 mV/g and broad frequency response, model 3263M9 features lightweight titanium housing, single 4-pin connector, and 4-40 tapped hole, as well as IEEE 1451.4 TEDS. Labels of X, Y, and Z axes are laser marked in large font size on 3 orthogonal faces, for aiding user in orienting sensor. Product is also suited for use in noise, vibration and harshness (NVH) testing,... Read More

Sensors Monitors & Transducers

Triaxial Accelerometers have miniature, low-noise design.

February 25, 2009

Weighing 2.7 g, 3273A series features laser-welded titanium design with ceramic sensing elements coupled to JFET electronics; noise floor is 0.0012 or 0.0002 Grms depending on model. Labels of axes X, Y, and Z are laser-marked in large font size on 3 orthogonal faces, which aids the user in orienting sensor. Designed for modal analysis testing, these IEPE accelerometers are available in... Read More

Sensors Monitors & Transducers

Piezoelectric Accelerometer incorporates mounting bracket.

February 11, 2009

Piezoelectric biaxial Model 3232A2 is designed for use in Health and Usage Monitoring Systems (HUMS), as well as Active Vibration Control (AVC) applications. Accelerometer elements are orthogonally mounted within bracket and are case isolated internally from mounting surface to avoid ground loops. Device features radial 3-pin Mighty Mouse connector with 5/16-28 thread, and 100 mV/g sensitivity,... Read More

Sensors Monitors & Transducers, Test & Measuring Instruments

Accelerometer is suited for underwater vibration measurement.

February 2, 2009

With sensitivity of 100 mV/g, Model 3217A features shear design ceramic seismic elements and is designed for submersible applications, with factory molded urethane boot and urethane cable. On-board miniature IC amplifier converts high impedance voltage signals from crystal to lower impedance level, which allows instrument to drive long cables with negligible signal loss. Weighing only 5 g,... Read More

Sensors Monitors & Transducers

Miniature Accelerometer features IEEE 1451.4 TEDS.

January 16, 2009

Weighing 10 g, Model 3093M18 is miniature 10 mV/g accelerometer that features 10-32 mounting stud and 4-pin connector. With its 0.61 in. vertical dimension, titanium constructed unit can be mounted into tight spaces. Hermetically sealed sensors feature shear construction and are electrically isolated from sensor case. Read More

Sensors Monitors & Transducers

Accelerometer is suited for low mass applications.

October 27, 2008

Model 3035M18 is available with sensitivity of 10 mV/g and M3 mounting screw. Miniature accelerometer is hermetically sealed, made of stainless steel, and weighs only 2.5 grams. Because of its light weight, this unit is suited for for applications where vertical space is limited and where mass loading effects are a concern. Read More

Sensors Monitors & Transducers

Accelerometer is designed for modal analysis testing.

September 25, 2008

Featuring sensitivity of 100 mV/g and frequency response range from 0.3-10,000 Hz, Model 3263M8 miniature triaxial accelerometer's X, Y, and Z axes are laser marked in large font size on 3 orthogonal faces to assist user in orienting sensor. Unit features lightweight titanium housing, single 4-pin connector, and 4-40 tapped hole. Applications include noise vibration and harshness, environmental... Read More

Sensors Monitors & Transducers

Miniature Accelerometer weighs 0.2 g.

August 29, 2008

Model 3224A1 is laser welded in titanium housing, has sensitivity of 10 mV/g, and can operate at temperatures up to 300°F. It features integrated electronics, adhesive mount, and planar shear ceramic design that reduces base strain sensitivity and thermal transient response. IEPE accelerometer with tiny teardrop design is suited for vibration measurements in small locations. Applications... Read More