Company News

ASG, Division of Jergens, Inc.

15700 S. Waterloo Rd., Cleveland, OH, 44110, USA

  • 888-486-6163

Latest New Product News from
ASG, Division of Jergens, Inc.

material handling & storage, portable tools, test & measuring instruments

Automatic Label Dispenser supports range of speeds, lengths.

February 5, 2013

Measuring 6.5 x 6.8 x 11 in. for placement on any workbench or assembly station, 9.04 lb LDX-130 increases productivity by automatically dispensing .169–5.1 in. labels while removing and discarding .169–5.1 in. wide backing material. Unit offers 10 feeding speed settings, built-in counter, and length adjustment programming. Requiring 110/220 V, 3 W power, dispenser accommodates 9.8 in. max label roll diameter and supports label lengths from .169–31.5 in. Read More

electrical equipment & systems

Power Supply is intended for automation, PLC technologies.

October 5, 2012

Compatible with ASG TL-Series, Alpha Series, CL-Series, and SS-Series tools, PS-55AT features inputs for tool enable/disable and outputs for cycle complete as well as high and low speed settings. This single tool control power supply, when used with external monitoring device, offers ability to count quantity of finished batches and number of screws to be installed into single product. Solution is designed for use with automation and PLC-based applications. Read More

fasteners & hardware

Sequence Recognition System assures screw fastening conformity.

July 2, 2012

Designed to prevent defects in products before they are made, Sequence Recognition System monitors fastener tightening sequence and provides feedback to disable/enable tool based on pre-programmed characteristics if proper fastener sequence is not followed. System can discern between fasteners with 0.25 in. center to center distances and greater. When used with ASG Precision Fastening X-PAQ(TM) system, sequence recognition system ensures proper torque, sequence, and revolution tolerance is achieved. Read More

portable tools

Electric Torque Driver provides stable screw tightening.

June 29, 2012

Measuring 8 in. long with 1 3/8 in. diameter, HIOS Model BLG-4000 operates up to 1,000 rpm at 30 Vdc and provides torque range of 0.9-4.8 lbf-in. Unit features brushless motor, which ensure clean operation and minimizes heat generation. With anti-static plastic main body, driver minimizes electrical charge making it suited for assembly of precision instruments and electronic components. Read More

controls & controllers, portable tools

Brushless DC Torque Drivers come in several configurations.

June 29, 2012

Available in lever start, push-to-start, and pistol grip models, TLB-C brushless DC torque drivers offer speeds from 350-1,000 rpm and either ¼ in. hex or 3/8 in. square drive depending on specific model. Use of brushless motor eliminates carbon dust and reduces heat generation, promoting clean operation and extended life. Models in Assembly Product Group - TLB-C203L, TLB-C419L, and TLB-C419P - feature anti-static plastic main body. Read More

machinery & machining tools, material handling & storage, portable tools

Screwfeeder can accommodate up to 11 different sized screws.

December 8, 2008

Featuring fully adjustable rail system, precision screwfeeder can hold 1.0, 1.2, 1.4, 1.7, 2.0, 2.3, 2.6, 3.0, 3.5, 4.0, and 5.0 mm screws. It feeds fasteners with less than 19 mm under head length, and can also accommodate screws with captive washers. Adjustable bit guide in automatic feeder allows use of most standard bits. Read More

portable tools

Pneumatic Screwdrivers deliver 22-115 lbf-in. of torque.

June 25, 2008

Featuring ergonomic design that provides operator comfort and gripping power, direct drive Torq2(TM) HDP Series is appropriate for soft draw applications, such as wood screws, self-tapping screws, or trim screws. Sculpted thermoplastic elastomer housings help deliver balanced, non-fatigue performance, while quick-change collet facilitates bit changing. Read More

mechanical components & assemblies

Torque Arm provides precise positioning of assembly tools.

June 10, 2008

Suited for vertical screw applications, Linear Torque Arm has linear slide that offers smooth motion for electric or pneumatic inline tools. Machined stainless steel and multiple ball bearing design with side-by-side slides provides stability for horizontal extension and retraction of tools up to 5 lb in weight and up to 150 lbf-in. torque. Arm movement is up/down, in/out, and full 360º radial side-to-side. Each arm is provided with 2 ASG 1-3 lb spring balancers. Read More

portable tools

Pneumatic Screwdrivers employ positive clutch design.

May 22, 2008

Available with torque ranges from 22-115 lbf-in, Torq2(TM) HPS Series pistol grip drivers are suited for soft draw applications such as wood screws, self-tapping screws, or trim screws. Operator controls torque of positive clutch tool by varying pressure applied to driver, and ergonomic design lends to operator comfort and gripping power. While sculpted thermoplastic elastomer housings promote balanced, non-fatigue performance, quick change collet facilitates bit changing. Read More

mechanical components & assemblies

Torque Arm helps minimize operator fatigue.

March 5, 2008

Used with pneumatic or electric inline drivers, Torque Arm limits operator influence on assembly process and helps absorb torque to minimize potential for operator injury to arm, wrist, or hand. Offering max reach of 30 in., arm accommodates tool weights up to 10 lb and max torques up to 100 lbf-in. Read More

portable tools

Pneumatic Screwdrivers speed assembly operations.

February 15, 2008

Offering adjustable torque ranges from 4.5-80 lbf-in., cushion clutch Torq2(TM) HCP Series is suitable for assembly operations using wood and sheet metal screws. Tools feature clutch that ratchets at preset torque, quick-change collet that facilitates bit changing, and sculpted thermoplastic housing that helps deliver balanced, non-fatigue performance. Read More

mechanical components & assemblies

Linear Torque Arm suits high capacity applications.

October 18, 2007

Intended for vertical screw applications, ASG Linear Torque Arm is designed to provide precise positioning of assembly tools by limiting operator control. Unit features machined stainless steel and multiple ball bearing construction with side-by-side slides that provide stability for tools up to 5 lb with up to 100 lbf-in. torque. Arm movement is up/down and 360° side-to-side unless limited by tool configuration, and each arm is provided with two 1-3 lb spring balancers. Read More

portable tools

Electric Screwdrivers are available with screw counter.

October 2, 2007

Torque-controlled tools in ASG TL, CL, SS, and Alpha Series, used in combination with ASG PS-55 Power Supply, are available with ASG STC-1 Screw Counter. This option offers additional capability beyond basic torque control by providing counting function and acting as visual indicator for operator. Read More

mechanical components & assemblies

Torque Arm uses pneumatic cylinder to help move tools.

August 8, 2007

Designed to help minimize operator fatigue, Heavy-Duty Torque Arm securely maintains tool location while allowing smooth movement of assembly tools in both up-down motion and 180° side-to-side motion. Unit also helps absorb torque to minimize potential for operator injury to arm, wrist, or hand. Mounting to bench top via bolts or bench clamp, torque arm accommodates inline pneumatic and inline electric drivers with max weights of 15 lb and max torques of 110 lbf-in. Read More

electrical equipment & systems

DC Power Source works with torque-controlled screwdrivers.

May 25, 2007

Suited for workstations with varied torque requirements, Model PS-110 accommodates 2 drivers simultaneously and includes switchable 2-speed output that delivers full 30 Vdc on High setting. Input voltage is switchable to 110 or 230 Vac, and is selected via external switch. Designed for industrial use, Model PS-110 features removable AC power cord that can be replaced if damaged. Read More

portable tools

Electric Screwdrivers suit precision assembly applications.

April 30, 2007

Weighing 12 oz, Torq2(TM) TL-6500 and TL-3000 are torque-controlled, dc screwdrivers feature clutches that automatically stop when pre-set torque is reached to eliminate over- and under-tightening. Tools can be operated at high or low speed settings when connected to ASG's PS-55 power supply, and ESD-safe models of each tool are available for static-sensitive applications. Torque can be set between 1.5 and 17 lb-in. for TL-6500 or .25 and 4.0 lb-in. for TL-3000. Read More

portable tools

Torque Controlled Screwdriver stops at designated torque.

April 27, 2007

Torq2(TM) drivers work with torque ranges from .5-156 lbf-in. and feature clutch design that automatically stops tool when designated torque is achieved, eliminating both over-and under-tightening. Torques can be adjusted by authorized personnel via torque nut, and tamper-proof covers are provided to prevent operators from changing adjustment. Available in push-to-start, lever start, pistol grip, and right angle styles, most drivers come standard to accept ¼ in. hex bits. Read More

electrical equipment & systems

Power Source drives torque-controlled assembly tools.

January 11, 2007

Intended for use with low-voltage dc drivers, Model PS-55 includes switchable 2-speed output and delivers full 30 Vdc on its higher setting. Input voltage is 110 or 220 Vac, selected via external switch. Standard clutch signal output allows use with counters or programmable logic controllers to monitor driver. Removable ac power cord can be replaced if damaged. Read More

material handling & storage

Carousel Tape Dispenser adjusts for width and length.

August 22, 2006

Eliminating need for manual dispensers, Model EZ-8000 cuts tape at touch of button, placing cut pieces on turntable for removal by single or multiple operators. Dispenser will cut tape into 9-61 mm lengths and accommodates widths from 3-25 mm. Most any tape or film with adhesive backing can be used, including filament, polyimide, acetate cloth, glass cloth, double-sided, masking, cloth, polyethylene, Teflon®, and craft. Read More

portable tools

Manual Torque Wrenches use universal round shank heads.

June 12, 2006

Available in 2 models with torque ranges of 10-50 lbf-in. and 30-250 lbf-in., T-Series manual torque-control wrenches is accurate to ±3% in direction of torque calibration from 20-100% FS. Wrenches have audible click to indicate torque has been reached, and can be calibrated using English or metric settings. Interchangeable heads are available including ratchet head, box-end, or open-end drivers. Read More

Other Company News from
ASG, Division of Jergens, Inc.