Company News


11540 South Eastern Ave., Henderson, NV, 89052, US

General Information:
Justin Moll
Phone: 702-896-3337
E-mail this person

Share Like Tweet Add Email

Latest New Product News from

Electronic Components & Devices, Electrical Equipment & Systems

Mezzanine Card supports 4- and 8-core Intel Xeon D CPUs.

November 24, 2015

Processor AdvancedMC (PrAMC) AMC754  is available with 8-core Intel® Xeon® D-1548 or 4-core Intel Xeon D-1520 CPU and provides migration path to next-generation 16-core CPUs. Mid-size module supports CPU with 16 GB DDR3 and 32 GB Flash memory as well as PCIe Gen3 (dual x4 or single x8), 10 GbE, GbE, and SATA connectivity. Also, front panel also provides mini HDMI video output and dual USB ports for storage or peripherals. Read More

Test & Measuring Instruments

Virtex-7 FPGA Carriers meet AMC.1/.2/.4 specifications.

June 15, 2015

AMC format Virtex-7 FPGA carriers utilize 690T device providing over 693K logic cells and 3600 DSP slices. While AMC516 has banks of 64-bit and 16-bit DDR3 memory and on-board P2040 PowerPC, similar AMC527 has 3 banks of 144 Mb QDR-II memory and without PowerPC. Features include clock and jitter cleaner as well as slot to accept FPGA Mezzanine Card (FMC) per VITA 57. Protocols such as PCIe, Serial RapidIO, and XAUI are FPGA programmable. Read More

Electronic Components & Devices, Test & Measuring Instruments

FPGA Mezzanine Card features signal conditioning.

June 8, 2015

Suited for high-speed networking, Model FMC109 features quad SFP/SFP+ transceivers for 10 GbE in copper or fiber formats. Mezzanine module has 4 re-timers on board which provide tuning for Tx and Rx signals. Re-timer ICs provide input equalization, clock and data recovery, and output de-emphasis. This also allows for use of longer copper cables as distortion is cleaned across farther distances. Read More

Test & Measuring Instruments

Analog-to-Digital Converter provides 8 channels at 2.6 GSPS.

June 2, 2015

Based on Virtex-7 FPGA and 4-core PowerPC, Model ATC136 provides 10-bit at 2.6 GSPS performance and also has single DAC, 14-bit at 2.8 GSPS. Board is equipped with 64-bit DDR3 memory (4 Gb on FPGA and 4 GB on PowerPC) as well as Flash memory and removable MicroSD card. Front panel ports include 8 SMA, JTAG, dual RJ-45, Clock-In/Sync Out, and dual MicroUSB. Read More

Mechanical Power Transmission

Advanced Mezzanine Card features quad SATA III SSD module.

May 29, 2015

Featuring mid-size, single-module design, Model AMC623 is equipped with four 1.8 in. SATA III drives for nearly 2 TB of storage. Four drives can provide 6 Gbps data rate which is routed to backplane via x2 PCIe lanes. Compliant to AMC.1 specification, advanced mezzanine card supports RAID 0, 1, and 10 for striping and mirroring options. Read More

Electronic Components & Devices, Test & Measuring Instruments, Electrical Equipment & Systems

AMC Board combines dual DACs and FPGA.

May 1, 2015

Suited for RADAR signal processing and jamming applications, Model AMC529 combines functionality of FPGA Carriers and digitizing FMCs. Board includes clock jitter cleaner and on-board clock generation as well as dual digital-to-analog converters that are rated 14-bit at 2.85 GSPS. On-board Virtex-7 FPGA has 3 banks of 144 Mbit QDR-II memory that is 36-bit wide plus 1 Gbit of 16-bit DDR3 memory. Additional features include IPMI Controller and clock holdover stability. Read More

Test & Measuring Instruments, Electrical Equipment & Systems, Computer Hardware & Peripherals

Dual ADC FMC features 12-bit @ 4.0 GSPS design.

April 7, 2015

Offering dynamic performance, FMC226 consists of dual-ADC, 12-bit at 4.0 GSPS module for RADAR, SIG-INT, wireless infrastructure, RF Sampling SDR, and other applications. FPGA Mezzanine Card (FMC) plugs into any VITA 57-compliant board, and ultra-low noise wideband PLL provides precision timing and clean signals. Analog input, clock input, and trigger inputs are routed via SSMC connectors; internal clock frequency is programmable; and clock can lock to external reference.
Read More

Mechanical Components & Assemblies, Computer Hardware & Peripherals

MicroTCA Embedded System operates at under 55 dBA.

March 27, 2015

Measuring 10.5 x 10 x 10.5 in., 6-slot Model VT898 includes 40 GbE-capable backplane with routing for FCLK and TCLK A-D, 1,000 W AC power supply, Telco Alarm, and JTAG Switch Module. Whisper Cube 6U chassis provides redundant cooling in push/pull front-to-rear airflow configuration. In addition to spring-loaded handle that is flush to top of chassis when not in use, design includes glide strips for smooth PSU and fan tray extraction. Read More

Computer Hardware & Peripherals

Dual FPGA Mezzanine Card incorporates Kintex-7 FPGA.

March 24, 2015

Featuring Xilinx® Kintex-7 FPGA, AMC502 consists of dual FPGA Mezzanine Card (FMC) carrier per VITA 57 specification supplied in double-module, mid-size AMC. This product has 32 MB Flash memory and on-board crystal referenced clock source to provide at least 125 MHz as GTX reference input for PCIe, SRIO, and GbE. LVDS crossbar switch and PLL promote clock flexibility and clean signals. Read More

Electrical Equipment & Systems, Computer Hardware & Peripherals

PCIe Gen3 Expansion Solution works with MicroTCA, other systems.

March 2, 2015

PCIe-compliant module, PCI123, routes x16 PCIe Gen 3 out of front panel ports. Utilizing SFF-8644 connectors, signals can be partitioned as single x16, dual x8, or quad x4 as required. Module supports aggregate raw data rate up to 128 Gbps and can be cabled to UTC006 MicroTCA Carrier Hub (MCH) for PCIe Expansion. Offering quad SFF-8644 ports for PCIe Gen3 expansion (x16, x8, or x4) and PCIe switch, MCH routes PCIe x16 to Rear Transition Module (RTM). Read More

Test & Measuring Instruments, Electrical Equipment & Systems

Dual D/A Converter features high sampling rate.

February 23, 2015

Compliant to MicroTCA.4 specification for High Energy Physics, Model AMC523 provides sampling rate of 250 MS/s at 16-bit resolution. Unit comes in mid-size double module, routing x8 or dual x4 PCIe to backplane. Featuring Kintex-7 FPGA with 2 GB of DDR3 memory, module allows for large buffer sizes to be storing during processing and queuing data to host. DAC connects with MRT523 Rear Transition Module, and routes 12 channels of ADC signals from RTM to FPGA. Read More

Computer Hardware & Peripherals

PCIe Gen3 Carrier Board fosters as-needed video board upgrades.

January 27, 2015

AMC104 enables use of high-end commercial video or other graphics cards as removable mezzanines in MicroTCA system. By providing carrier, users can upgrade PCIe GPGPU or other video board as needed to serve application requirements. Product is available as double module, full size, and routes PCIe Gen3 to backplane as x4 or x8. Other features include temperature sensor, DIP switches for IPMI functionality, and management RS-232 port. Read More

Test & Measuring Instruments, Electronic Components & Devices

FPGA Mezzanine Card combines A/D and D/A converter.

January 16, 2015

Compliant to VITA 57 specification, Model FMC525 combines 14-bit 5.7 Gsps D/A converter and 12-bit 4.0 Gsps A/D converter. DAC core is based on quad-switch architecture that enables dual-edge clocking operation, increasing DAC update rate to 5.7 Gsps when configured for Mix-Mode™ or 2x interpolation. Input sampling clock can be via front panel or on board wide-band PLL. Model FMC525 is suited for RADAR, LTE/Broadband communications systems, ATE, and video/broadcast uses. Read More

Mechanical Components & Assemblies

Rugged MicroTCA Chassis features high-density design.

December 29, 2014

Featuring aluminum construction and reinforced cover, 6-slot 1U Model VT950 holds up to 6 Advanced Mezzanine Cards and has integrated MCH with IEEE1588/SyncE/GPS capabilities, including clock disciplining with arbitrary clock frequency output and holdover. MCH can use fabrics such as 40 GbE/10 GbE, PCIe Gen 3, or Serial RapidIO. Offering front-to-rear cooling with 500 W universal AC or 400 W DC power supply, chassis meets MIL-STD-901D and 810G for shock and vibration and MIL-STD-461F for EMI. Read More

Computer Hardware & Peripherals

AdvancedTCA Carrier is designed for PCIe Gen 3 cards.

December 9, 2014

Along with Intel® Xeon® E3-1268L V3 processor (quad-core @ 2.3 GHz or turbo frequency @ 3.3 GHz), ATC121 features x16 PCIe Gen 3 slot that accepts any PCIe edge-type module. Dual RJ-45, USB, and RS-232 ports are standard, and graphics ports include dual Display Port input as well as DVI-D and Display Port outputs. Customized versions afford different I/O front panel options. Also available are optional mSATA sockets (for expanded storage) and on-board VT003 shelf manager. Read More

Computer Hardware & Peripherals, Communication Systems & Equipment

Dual Wideband Transceiver is available in FMC format.

November 25, 2014

Suited for LTE, SDR, and other RF applications, FMC214 comes in FPGA Mezzanine Card (FMC) format, has 70 MHz to 6 GHz range, and utilizes 8 SSMC connectors for I/O. TDD- and FDD-compatible board combines RF front end, frequency synthesizers for Rx and Tx, mixed-signal baseband section, and digital interface to host processor through LPC connector. Instantaneous bandwidth is programmable from 200 KHz to 56 MHz, and clocking can be external via FMC connector or from on-board internal clock.
Read More

Mechanical Components & Assemblies

MicroTCA.4 Chassis offers high poerformance in 2U height.

November 18, 2014

Featuring 6 double module AMC slots and corresponding Rear Transition Modules (RTMs), MCH slot, and redundant power supplies, horizontal-mount VT814 complies to MicroTCA.4 specification for High Energy Physics and other applications requiring rear I/O. Chassis accepts up to 2 VadaTech 500 W (UTC017) or 796 W (UTC013) AC power supplies, and 40 GbE-capable backplane equalizes clock delays across AMC slots. Unit comes standard with Telco Alarm and JTAG Switch Module. Read More

Material Handling & Storage, Mechanical Components & Assemblies, Electronic Components & Devices

Rugged Subrack Chassis and Modules meet MicroTCA.1 specs.

September 5, 2014

Compliant to MicroTCA.1 specification for air-cooled rugged applications, 3U high VT930 subrack features up to 12 AMC slots, including up to 6 full-size (6HP) and 6 mid-size (4HP) modules, as well as perforated top and bottom covers. Unit is cooled from external fan tray below card cage, and passive backplane is 40 GbE capable with dual MicroTCA Carrier Hub slots and dual Power Module slots. Modules available in MicroTCA.1 format require latching screw for retention and stability. Read More

Computer Hardware & Peripherals, Mechanical Components & Assemblies, Green & Clean

Fully Redundant 1U MicroTCA Chassis maximizes computing density.

July 31, 2014

By combining fan trays and power supplies on rear of chassis, VT840 allows 6 AMC slots – divided among 2 sets of 3 slots for full redundancy options with failover – in single module size. Each set of slots have their own dedicated PCIe Fabric, GbE, Power Module, clock structure, and management. Dual integrated shelf managers are also provided, and mezzanine approach permits various front panel I/O options in compact, dedicated space. There are 4 SFP+ ports for 10 GbE and 4 SFP for GbE. Read More

Test & Measuring Instruments, Computer Hardware & Peripherals

FPGA Mezzanine Cards suit network interface applications.

July 16, 2014

Offering high-speed interfaces with up to 40 GB speeds, network interface FPGA Mezzanine Card (FMC) series comprises cages for dual QSPF+, SPF+, and RJ-45 as well as some quad cage versions. Products meet VITA 57 specifications for FMCs, and front panel has dual sets of LEDs for USER0, USER1, and PRESENT. Along with dual QSFP+ ports for 40GbE/SRIO, PCIe, and Aurora, FMC108 features onboard dual re-driver that allows use of long copper cables. Read More

Other Company News from