Latest New Product News from
Suited for RADAR signal processing and jamming applications, Model AMC529 combines functionality of FPGA Carriers and digitizing FMCs. Board includes clock jitter cleaner and on-board clock generation as well as dual digital-to-analog converters that are rated 14-bit at 2.85 GSPS. On-board Virtex-7 FPGA has 3 banks of 144 Mbit QDR-II memory that is 36-bit wide plus 1 Gbit of 16-bit DDR3 memory. Additional features include IPMI Controller and clock holdover stability. Read More
Offering dynamic performance, FMC226 consists of dual-ADC, 12-bit at 4.0 GSPS module for RADAR, SIG-INT, wireless infrastructure, RF Sampling SDR, and other applications. FPGA Mezzanine Card (FMC) plugs into any VITA 57-compliant board, and ultra-low noise wideband PLL provides precision timing and clean signals. Analog input, clock input, and trigger inputs are routed via SSMC connectors; internal clock frequency is programmable; and clock can lock to external reference.
Measuring 10.5 x 10 x 10.5 in., 6-slot Model VT898 includes 40 GbE-capable backplane with routing for FCLK and TCLK A-D, 1,000 W AC power supply, Telco Alarm, and JTAG Switch Module. Whisper Cube 6U chassis provides redundant cooling in push/pull front-to-rear airflow configuration. In addition to spring-loaded handle that is flush to top of chassis when not in use, design includes glide strips for smooth PSU and fan tray extraction. Read More
Featuring Xilinx® Kintex-7 FPGA, AMC502 consists of dual FPGA Mezzanine Card (FMC) carrier per VITA 57 specification supplied in double-module, mid-size AMC. This product has 32 MB Flash memory and on-board crystal referenced clock source to provide at least 125 MHz as GTX reference input for PCIe, SRIO, and GbE. LVDS crossbar switch and PLL promote clock flexibility and clean signals. Read More
PCIe-compliant module, PCI123, routes x16 PCIe Gen 3 out of front panel ports. Utilizing SFF-8644 connectors, signals can be partitioned as single x16, dual x8, or quad x4 as required. Module supports aggregate raw data rate up to 128 Gbps and can be cabled to UTC006 MicroTCA Carrier Hub (MCH) for PCIe Expansion. Offering quad SFF-8644 ports for PCIe Gen3 expansion (x16, x8, or x4) and PCIe switch, MCH routes PCIe x16 to Rear Transition Module (RTM). Read More
Compliant to MicroTCA.4 specification for High Energy Physics, Model AMC523 provides sampling rate of 250 MS/s at 16-bit resolution. Unit comes in mid-size double module, routing x8 or dual x4 PCIe to backplane. Featuring Kintex-7 FPGA with 2 GB of DDR3 memory, module allows for large buffer sizes to be storing during processing and queuing data to host. DAC connects with MRT523 Rear Transition Module, and routes 12 channels of ADC signals from RTM to FPGA. Read More
AMC104 enables use of high-end commercial video or other graphics cards as removable mezzanines in MicroTCA system. By providing carrier, users can upgrade PCIe GPGPU or other video board as needed to serve application requirements. Product is available as double module, full size, and routes PCIe Gen3 to backplane as x4 or x8. Other features include temperature sensor, DIP switches for IPMI functionality, and management RS-232 port. Read More
Compliant to VITA 57 specification, Model FMC525 combines 14-bit 5.7 Gsps D/A converter and 12-bit 4.0 Gsps A/D converter. DAC core is based on quad-switch architecture that enables dual-edge clocking operation, increasing DAC update rate to 5.7 Gsps when configured for Mix-Mode™ or 2x interpolation. Input sampling clock can be via front panel or on board wide-band PLL. Model FMC525 is suited for RADAR, LTE/Broadband communications systems, ATE, and video/broadcast uses. Read More
Featuring aluminum construction and reinforced cover, 6-slot 1U Model VT950 holds up to 6 Advanced Mezzanine Cards and has integrated MCH with IEEE1588/SyncE/GPS capabilities, including clock disciplining with arbitrary clock frequency output and holdover. MCH can use fabrics such as 40 GbE/10 GbE, PCIe Gen 3, or Serial RapidIO. Offering front-to-rear cooling with 500 W universal AC or 400 W DC power supply, chassis meets MIL-STD-901D and 810G for shock and vibration and MIL-STD-461F for EMI. Read More
Along with Intel® Xeon® E3-1268L V3 processor (quad-core @ 2.3 GHz or turbo frequency @ 3.3 GHz), ATC121 features x16 PCIe Gen 3 slot that accepts any PCIe edge-type module. Dual RJ-45, USB, and RS-232 ports are standard, and graphics ports include dual Display Port input as well as DVI-D and Display Port outputs. Customized versions afford different I/O front panel options. Also available are optional mSATA sockets (for expanded storage) and on-board VT003 shelf manager. Read More
Suited for LTE, SDR, and other RF applications, FMC214 comes in FPGA Mezzanine Card (FMC) format, has 70 MHz to 6 GHz range, and utilizes 8 SSMC connectors for I/O. TDD- and FDD-compatible board combines RF front end, frequency synthesizers for Rx and Tx, mixed-signal baseband section, and digital interface to host processor through LPC connector. Instantaneous bandwidth is programmable from 200 KHz to 56 MHz, and clocking can be external via FMC connector or from on-board internal clock.
Featuring 6 double module AMC slots and corresponding Rear Transition Modules (RTMs), MCH slot, and redundant power supplies, horizontal-mount VT814 complies to MicroTCA.4 specification for High Energy Physics and other applications requiring rear I/O. Chassis accepts up to 2 VadaTech 500 W (UTC017) or 796 W (UTC013) AC power supplies, and 40 GbE-capable backplane equalizes clock delays across AMC slots. Unit comes standard with Telco Alarm and JTAG Switch Module. Read More
Compliant to MicroTCA.1 specification for air-cooled rugged applications, 3U high VT930 subrack features up to 12 AMC slots, including up to 6 full-size (6HP) and 6 mid-size (4HP) modules, as well as perforated top and bottom covers. Unit is cooled from external fan tray below card cage, and passive backplane is 40 GbE capable with dual MicroTCA Carrier Hub slots and dual Power Module slots. Modules available in MicroTCA.1 format require latching screw for retention and stability. Read More
By combining fan trays and power supplies on rear of chassis, VT840 allows 6 AMC slots – divided among 2 sets of 3 slots for full redundancy options with failover – in single module size. Each set of slots have their own dedicated PCIe Fabric, GbE, Power Module, clock structure, and management. Dual integrated shelf managers are also provided, and mezzanine approach permits various front panel I/O options in compact, dedicated space. There are 4 SFP+ ports for 10 GbE and 4 SFP for GbE. Read More
Offering high-speed interfaces with up to 40 GB speeds, network interface FPGA Mezzanine Card (FMC) series comprises cages for dual QSPF+, SPF+, and RJ-45 as well as some quad cage versions. Products meet VITA 57 specifications for FMCs, and front panel has dual sets of LEDs for USER0, USER1, and PRESENT. Along with dual QSFP+ ports for 40GbE/SRIO, PCIe, and Aurora, FMC108 features onboard dual re-driver that allows use of long copper cables. Read More
Along with Cavium™ Octeon II CN6880 multi-core processor and Virtex-7™ FPGA, AMC738 features CFP2 front panel port that can utilize 4 x 25 Gbps lanes or 10 x 10 Gbps lanes. Board comes in double module, full size and offers several banks of DDR3 memory, Serial over LAN capabilities, and true hardware Random Number Generator. On-board SDHC socket is available for mass storage, and other front panel interfaces include dual RJ-45 and dual RS-232 ports. Read More
In addition to 10G managed Layer 2 switch with Xilinx® Virtex-7 FPGA, ATC133 10GbE Carrier features crossbar Switch (CBS) that allows any combination of backplane ports to be routed to FPGA. There are dual XAUI ports and dual GbE ports to each AMC slot. On-board PowerPC runs Linux OS, managing switch, loading FPGA image, and CBS. Also, carrier also routes up to 280 W to 4 full-size single or 2 double Advanced Mezzanine Cards (AMC) modules. Read More
Meeting AMC.1 specifications for use in MicroTCA and AdvancedTCA systems, Model AMC626 holds 2.5 in. drive for SATA II at 6 Gbps transfer rate or SAS-3 for 12 Gbps transfer rate. Module offers storage capacity of 900 GB per disk and includes Host Bus Adapter that allows storage data to transfer across fat pipe fabric, expanding from 2 dedicated SAS/SATA ports to x8 lanes across PCIe Gen 3. With RAID 0/1/1E/10 options, module provides striping, mirroring, and mirroring/block-level striping. Read More
Fully backwards compatible with previous VadaTech product generations, VT003 provides quad-core, 1 GHz per core processor; 1 GB DDR3 memory; 32 GB Flash; and 8 GB NAND Flash. Mezzanine approach facilitates deployment on choice of carrier, while F-RAM for log messages promotes accelerated write performance, increased write/erase cycles, and minimized power consumption. Other features include dual 10/100 Ethernet ports, 3 RS-232 ports, and I²C RTC with battery back-up.
Supplied in FPGA Mezzanine Card format that conforms to VITA 57 specifications, Model FMC223 features TRIG Out, CLK In, and Analog Out, along with Multi-IO LVDS connector and status LEDs on front panel. Mezzanine offers 8, 16, 32, or 72 QAM for amplitude modulation, while RF Phased Locked Loop synthesizer provides optimized linearity and band flatness performance. Read More
Other Company News from