Company News

Share Like Tweet Add Email

Latest New Product News from
Farsens S.L.

Electronic Components & Devices, Communication Systems & Equipment, Test & Measuring Instruments

UHF RFID IC Evaluation Board fosters battery-free development.

March 17, 2015

Spider evaluation board is available for ANDY100 UHF RFID IC, which harvests RF energy from commercial UHF RFID readers and communicates with them using EPC C1G2 standard commands. ANDY 100 IC, included with evaluation board, also includes SPI master to drive sensors while keeping tag plus sensor device battery-free. Additionally included start-up circuit lets developers work directly with SPI sensors or connect MCU of choice for further processing. Read More

Labels, Tags, Signage & Equipment, Automatic ID

Battery-Free RFID Tag monitors voltage level.

February 9, 2015

Capable of transmitting unique identifier and associated voltage level measurement data to commercial EPC C1G2 reader, VMETER-DCLV10 measures voltages from 0–1.5 V with adjustable gain of 1–1,000. Unit has 96 bit EPC number, 32 bit TID, and password protected Kill command. Available in variety of antenna designs and sizes to adapt to required application in 860–960 MHz band, thermistor tag offers reading distance of 5 ft and can be embedded in materials such as plastic or concrete. Read More

Test & Measuring Instruments

Development Platform for battery-free wireless sensors and actuators.

January 12, 2015

Featuring ANDY100 chip with EPC C1G2 communication and Texas Instruments MSPG2233IPW20 MCU for communication with developers' circuits, Medusa lets users develop wireless sensors or actuators without requiring batteries on tag. UHF RFID battery-free device development platform lets developers design components driven by RF energy harvesting. Energy harvested from RF field created by RFID reader powers up ANDY100 IC, MCU, as well as circuitry and devices attached to it. Read More

Labels, Tags, Signage & Equipment, Sensors, Monitors & Transducers, Automatic ID

RFID Pressure Monitoring Tag operates without batteries.

December 18, 2014

Without requiring battery on sensor tag, Cyclon-05BA wireless monitoring device can transmit unique identifier and associated absolute pressure measurement data to commercial EPC C1G2 reader. Unit features MS5803-05BA sensor to monitor pressures up to 6 bar and comes in various antenna designs and sizes to adapt performance to required application in 860–960 MHz band. With reading distance of ~5 ft, tag can be embedded in various materials. Read More

Test & Measuring Instruments, Labels, Tags, Signage & Equipment, Automatic ID

Wireless RFID Tag helps monitor weight of assets.

December 3, 2014

Featuring 4 channels for load cells with measurement ranges from 0–900 kfg per channel, Atlas RFID Sensor Tag is capable of transmitting unique identifier and associated weight measurement data to commercial EPC C1G2 reader without need for battery on tag. Device comes in variety of antenna designs and sizes to adapt performance to required application in 860–960 MHz band. With reading distance of 5 ft, magnetometer tag can be embedded in materials such as plastics or concrete. Read More

Test & Measuring Instruments, Labels, Tags, Signage & Equipment, Sensors, Monitors & Transducers, Automatic ID

Battery-Free RFID Sensor Tag measures temperature and RH.

September 29, 2014

Able to transmit unique identifier and associated RH and temperature measurement data to EPC C1G2 reader, Hygro-Fenix-H221 features HTS-221 humidity sensor with 20%–80% RH range and ±4.5 RH accuracy and can measure temperature from 0 to +60°C with ±1°C accuracy. Fully passive tag, used to monitor environmental conditions of assets, has ~5 ft reading distance and is available with various antenna designs/sizes to adapt performance to required application in 860–960 MHz band. Read More

Labels, Tags, Signage & Equipment, Automatic ID

RFID Switch Monitor Tag features battery-free design.

September 4, 2014

Featuring 96 bits EPC number, 32 bit TID, and password-protected Kill command, Model X32 is capable of transmitting unique identifier and status of up to 32 switches to EPC C1G2 reader without battery on sensor tag. Unit offers reading distance of 5 ft and can be embedded in materials such as plastics or concrete. Available in variety of antenna designs and sizes to adapt to required application in 860–960 MHz band, tag can be encapsulated in IP67/IP68 casing for harsh environments. Read More

Labels, Tags, Signage & Equipment, Electronic Components & Devices, Automatic ID

RF Field Detector with LED offers 3 m detection range.

July 29, 2014

Whenever PHOTON UHF RF Field Detector Passive Tag is close to RF field source, it will harvest energy from RF field and drive LED. Tag can be used to assess status of aging RFID implementations and to signal activities to users. Entering specific area may require certain set of procedures from user. To make user aware that he/she entered area, LED will act as visual indicator and remind user about specific task to do and specific location to act at. Read More

Labels, Tags, Signage & Equipment, Sensors, Monitors & Transducers, Automatic ID

Battery-Free RFID Light Detector helps monitor asset exposure.

July 10, 2014

Used to monitor light exposure of tagged assets, The SHADOW is compatible with EPC C1G2 readers and features LPRS N5AC501085 Light Dependent Resistor. Ambient light detector tag has 96 bits EPC number, 32-bit TID, and password-protected Kill command. Built in PCB format and available in various antenna designs and sizes, fully passive tag supports up to 1.5 m communication range and -22 to +185°F operation, and can be embedded in diverse materials and encapsulated in IP67 or IP68 casing. Read More

Labels, Tags, Signage & Equipment, Automatic ID

RFID Resistance Meter Tag features battery-free design.

June 5, 2014

Capable of transmitting unique identifier and associated resistance measurement data to commercial EPC C1G2 reader without need of battery on sensor tag, RMETER can measure resistances from 100 Ω to 500 KΩ with accuracy of ±3%. Passive unit also offers extended range from 10 Ω to 10 MΩ with accuracy of ±7%. Operating in 860-960 MHz band, RMETER features reading distance of 5 ft, 96-bit EPC number, 32-bit TID, and password protected Kill command. Read More

Test & Measuring Instruments, HVAC, Labels, Tags, Signage & Equipment, Automatic ID

RFID Temperature Sensor Tag features battery-free design.

March 31, 2014

Capable of transmitting unique identifier and associated temperature measurement data to commercial EPC C1G2 reader without battery on sensor tag, Pyros-TGT2-DWB features 103GT-2 NTC thermistor from Semitec with measurement range from -10 to +120°C and accuracy of ±0.5°C. Unit also offers extended temperature range from -30 to +300°C with accuracy of ±3°C. Offering reading distance of 5 ft, tag comes in variety of antenna designs to adapt performance to application in 860-960 MHz band. Read More

Labels, Tags, Signage & Equipment, Automatic ID

Battery-Free RFID Relay can be activated/deactivated wirelessly.

February 10, 2014

Compatible with commercial EPC C1G2 readers, TITAN battery-free, RFID, bistable relay tag can be wirelessly activated and deactivated via their unique ID. Relay has 96-bit EPC number, 32-bit TID, and password-protected Kill command and retains latest status even when RFID reader is absent. Built in PCB format, product comes in different sizes, offers communication range of up to 1.5 m, and operates from -22 to +185°F.  Actuator tags come in various antenna designs and sizes. Read More

Labels, Tags, Signage & Equipment, Automatic ID

RFID Magnetometer Tag does not require batteries.

November 21, 2013

Featuring LIS3MDL magnetometer with ±4 to ±16 gauss measurement range, Magneto can transmit unique identifier and associated magnetic field measurement data to commercial EPC C1G2 reader without requiring battery on sensor tag. Variety of antenna designs and sizes are available to adapt performance to required application in 860–960 MHz band. Able to be embedded in variety of materials, tag offers ~5 ft reading distance and can be used without batteries at all. Read More

Labels, Tags, Signage & Equipment, Sensors, Monitors & Transducers, Automatic ID

Wireless Sensor Tags feature battery-free design.

September 27, 2013

Based on UHF RFID technology, Full Battery Free Sensor Tags can continuously monitor and transmit data, together with 96-bit EPC unique tag identifier, to any EPC Gen 2 standard compliant reader. Kits come with tags of choice, plus commercial UHF RFID reader, reader antenna, reader power supply, Ethernet cable to connect to PC or laptop, and software that displays sensor data on computer. Sensor options include: temperature, pressure, orientation, and mechanical switch. Read More

Test & Measuring Instruments, HVAC, Labels, Tags, Signage & Equipment, Sensors, Monitors & Transducers, Automatic ID

Battery-Free Sensor Kits aid in product testing.

September 9, 2013

Basic and Regular Battery Free Sensor kits target those interested in testing with their wireless battery-free sensor products. Kits are based on battery-free, UHF RFID sensor tags. Basic kit includes 3 wireless battery free sensor tags of choice, while Regular kit includes 10. Tags in these kits come in non-protected PCB formats for custom encapsulation or embedding in non-metallic assets/materials. Also included, software program displays sensor tag data on computer. Read More

Labels, Tags, Signage & Equipment, Automatic ID

RFID Sensor Tag features battery-free design.

July 22, 2013

Capable of transmitting unique identifier and associated orientation data to commercial EPC C1G2 reader without battery, Kineo1 Tag is suitable for applications where accessibility is restricted, or where use of batteries is not recommended. Passive tag can communicate to around 5 ft and can transmit through materials such as plastics or concrete. Available in variety of antenna designs and sizes, unit provides 3-axis acceleration data with ODR of 10 Hz. Read More

  • 1

Other Company News from
Farsens S.L.