Company News

Alliance Sensors Group

102 Commerce Dr. Unit 8, Moorestown, NJ, 08057, US

  • 856-727-0250

Sales:
John R. Matlack
USA
E-mail this person

General Information:
Ed Herceg
USA
E-mail this person

Share Like Tweet Add Email

Latest New Product News from
Alliance Sensors Group

Sensors, Monitors & Transducers

Inductive Linear Sensors provide cylinder position feedback.

February 4, 2015

Available in embedded, port mount, and port mount 25 mm hex housing versions, respectively, Series ME, MR, and MHP measure ram position of hydraulic and pneumatic cylinders in industrial, mobile, or subsea applications. Units offer measurement ranges from 1–24 in. and operate to 5,000 psi or 10,000 ft depth. Supplied in IEC IP67-rated aluminum or stainless steel housing, sensors are based on contactless inductive sensing technology, eliminating need for magnet. Read More

Sensors, Monitors & Transducers

Inductive Linear Position Sensor adapts to cylinder designs.

January 16, 2015

Installed in rear endcap of hydraulic cylinders for operation at pressures up to 5,000 psig, MHP series offers 1 in. hex aluminum or stainless steel housings suited for mobile hydraulics, factory automation machinery, or oil and gas exploration equipment. Sensors mount to cylinder with male o-ring port thread and feature ranges from 2–24 in. Contactless operation negates wear due to cycling or dithering, and SenSet™ allows for field scalability of analog output. Read More

Sensors, Monitors & Transducers

Inductive Linear Position Sensor targets factory automation.

January 12, 2015

Supplied in 0.75 in. dia anodized aluminum housing sealed to IP67, contactless LR-19 Series offers 6 ranges from 1–8 in. Radial cable exit version comes with swivel rod eye ends, while axial termination versions feature M-12 connector or cable. Operating from DC voltages, series offers choice of 4 analog outputs that include SenSet™ field recalibration feature. Performance, compact design, and stroke-to-length ratio suit industrial testing laboratory and OEM applications. Read More

Sensors, Monitors & Transducers

Inductive Linear Position Sensors do not require magnets.

November 19, 2014

Used to measure ram position of hydraulic and pneumatic cylinders, MR Series offers drop-in form, fit, and function replacement for magnetostrictive sensors. Contactless inductive sensing technology employs solid probe construction style that requires conductive tubular target or small diameter deep hole gun drilled in cylinder rod. Operating to 5,000 psi or 10,000 ft depth, shock- and vibration-resistant sensors offer measurement ranges from 4–36 in. and SenSet™ field-adjustable scaling. Read More

Sensors, Monitors & Transducers

Inductive Linear Position Sensor withstands harsh conditions.

November 17, 2014

Available in 100, 150, 200, 250, and 300 mm ranges and with 0–10 Vdc or 4–20 mA output, LV-45 series withstands vibration and shock found in steel, aluminum, and paper mills as well as temperatures (-40 to +85°C) and humidity of outdoor applications. SenSet™ range adjustability lets user scale zero and full span output to actual range of motion of workpiece being measured after sensor is installed. Constructed with double shaft seals, sensor has 1.75 in. OD body with 5 mm wall thickness. Read More

Test & Measuring Instruments, Electronic Components & Devices

AC LVDT Signal Conditioner features pushbutton calibration.

March 28, 2014

Offering smart and accelerated LVDT setup, DIN-rail mountable SC-100 features built-in null indication as well as front panel pushbuttons to set zero and full scale. Module works with range of AC-operated LVDTs, RVDTs, and inductive half-bridge position sensors. Also compatible with Marposs and Solartron analog pencil gaging probes, product provides RS-485 digital communications port for remote setup and can be master/slaved to prevent beat frequency interaction between sensor signals. Read More

Sensors, Monitors & Transducers

LVDT Linear Position Sensors withstand extreme environments.

March 12, 2014

Available in ranges from 3–15 in., LA-25-A Series is designed with 1 in. diameter heavy wall housing made of aluminum or stainless steel and 2 double-contact shaft seals that keep fluids and contaminants out of bore. Core is enclosed in 3/8 in. diameter core extension rod assembly from which it can never break loose. Offering choice of axial connectors or cable in metal cord grip, sensors are environmentally sealed to IP68 and provide continuous operation at temperatures up to 220°F. Read More

Sensors, Monitors & Transducers

Linear Position Sensors withstand severe shock and vibration.

February 11, 2014

Using proprietary inductive technology, LV-45 Series offers 5 ranges of 100, 150, 200, 250, and 300 mm with output of 0–10 Vdc or 4–20 mA. SenSet™ range adjustability allows user to scale zero and full span output to actual range of motion of workpiece being measured after sensor is installed. Featuring 1.75 in. OD body, 5 mm wall thickness, and operating temperature from -40 to +85°C, sensors are available with optional mounting flanges, rod eye ends, and connector or cable terminations. Read More

Test & Measuring Instruments

Spring-Extend AC-LVDT Pencil Probes offer submicron resolution.

October 23, 2013

DGP dimensional gauging probes (pencil probes), manufactured with the precision ground bearings, come standard with 8 mm dia plain outer body; optional sleeve, either plain or partly threaded, increases OD to 0.375 in. Offered in ±0.5 mm, ±1.0 mm, and ±2.5 mm ranges, products feature 2 m long axial shielded cable that is strain relieved and can be converted to radial cable outlet with included right angle cable adapter. Resolution and repeatability are better than 0.5 micron. Read More

Sensors, Monitors & Transducers

Linear Position Sensors offer field calibration.

July 25, 2013

With SenSet™ Field Programmability technology, installers of LV, MR-7, and ME-7 Linear Position Sensors can exactly match full scale electrical output (4–20 mA or 0–10 Vdc) of sensor to actual mechanical movement range of device in which sensor is installed. After installing sensor, user moves device to its zero position, presses SenSet button, then moves device to full scale position and presses same SenSet button. Sensor is then calibrated over device's range of motion. Read More

Sensors, Monitors & Transducers

Inductive Linear Position Sensors act as drop-in replacements.

June 28, 2013

Designed as drop-in form, fit, and function replacement for magnetostrictive sensors, MR Series is used in measuring ram position of hydraulic and pneumatic cylinders. Products are based on contactless inductive sensing technology that employs solid probe construction style, and coil design enables sensors to withstand shock and vibration as well as temperatures to 85°C (standard) or 125°C (custom). Sensors come in full ranges from 2–36 in. with analog DC voltage or current output. Read More

Test & Measuring Instruments, Electronic Components & Devices

AC-LVDT Signal Conditioner offers broad compatibility.

November 27, 2012

Engineered to work with AC-LVDTs, RVDTs, and inductive half-bridge sensors, S1A DIN rail module supports LVDT operation and indicates most common failures. Built-in null indication and front panel pushbuttons, used to set zero and full scale, accelerate intelligent LVDT setup, while internal MPU eliminates need to calculate jumper connections for gain, range, etc. Conditioner offers choice of 4 excitation frequencies, 8 analog DC outputs, and RS-485 digital communications. Read More

Sensors, Monitors & Transducers

LVDT Linear Position Sensors aid steam turbine valve control.

November 23, 2012

Engineered for valve position sensing applications for steam turbine control systems in electric power generation plants, PG Series offer 5 FS ranges from 0–3 in. to 0–15 in. LVDTs of PGHD Heavy Duty series and PGSD Super Duty series have 1 1/16 and 1 5/16 in. dia bodies, respectively. Offered with rigid or ball joint coupling, 3/8 in. dia operating rod captivates core so it never comes out or vibrates loose. Body clamps, flange mounts, ball joint couplings, and rod eye ends are included. Read More

Test & Measuring Instruments, Electronic Components & Devices

AC-LVDT Signal Conditioner offers digital communications.

September 10, 2012

Engineered to work with wide range of AC-LVDTs, RVDTs, and inductive half-bridge sensors, DIN rail-mount Model S1A features built-in null indication and front panel pushbuttons to set zero and full scale. Unit offers choice of 4 excitation frequencies, 8 analog outputs, and RS-484 digital communications. For installations where there are multiple position sensors, signal conditioners can be master/slaved to prevent cross talk between sensor signals. Read More

  • 1

Other Company News from
Alliance Sensors Group