Company News

Teledyne LeCroy Corporation

700 Chestnut Ridge Road, Chestnut Ridge, NY, 10977, USA

  • 845-425-2000

Latest New Product News from
Teledyne LeCroy Corporation

test & measuring instruments, software, test & measuring instruments

Oscilloscopes optimize usability via OneTouch gesture control.

April 8, 2016

Available in 6 models with bandwidths from 500 MHz to 4 GHz and OneTouch gesture control, WaveRunner 8000 series provides tools and features to expedite problem solving. MAUI® UI facilitates measurement setup and accelerates insight into complex signal abnormalities, while math, measurement, debug, and documentation tools optimize analysis. While M models offer 40 GSPS sample rate and 128 Mpt memory, -MS models feature 16 digital channel sampling at 1.25 GSPS. Read More

software, test & measuring instruments

Protocol Analyzer captures Ethernet and Fiber Channel data.

March 7, 2016

Utilizing T.A.P.3™ probing technology, SierraNet™ T328 offers completely transparent acquisition solution for 25G, 50G, and 100G Ethernet standard as well as 32G/128G Fiber Channel interconnections, ensuring traffic that is captured is traffic transiting bus under observation. Traffic capture occurs within analyzer's dedicated in-band, line-rate probing technology, providing bit level detail of data stream. Analyzer is operated with Net Protocol Suite, featuring nanosecond trigger granularity. Read More

software, test & measuring instruments

USB 3.1 Protocol Analyzer comes with automated PD test suite.

January 21, 2016

Voyager M310C incorporates Power Delivery Compliance Suite, which is based on Power Delivery (PD) Compliance Plan v1.0 and uses emulation scripts to mimic PD link partner behaviors. Initiating and responding to PD messages while analyzing real response from DUT, system communicates directly over Type-C cabling, and generated pass/fail reports. Fully automated test suite lets developers verify functionality, error recovery, and compliance for PD chipsets and end-products. Read More

electronic components & devices, software, test & measuring instruments

Interposer and Analyzer test PCIe External Cable 3.0 ports.

January 21, 2016

Used with Summit™ Protocol Analyzers, PCIe External Cable 3.0 Interposer enables PCIe® bus traffic between system board and storage devices using PCIe External Cable 3.0 cables to be monitored, captured, and recorded. Interposer will support analysis for PCIe host interfaces such as SATA Express and NVM Express at data rates from 2.5–8 GT/s and link widths from x1 to x8. Adapter is also available for testing devices that use SFF-8644 connector with PCIe External Cable 3.0 class cables. Read More

test & measuring instruments

Motor Drive Analyzers offer harmonics calculation option.

November 6, 2015

Available for MDA800 Series Motor Drive Analyzers, optional Harmonics Calculation software package adds advanced harmonic filtering for AC Input and Drive Output Numeric table measurements, as well as Total Harmonic Distortion measurement parameters for voltage, current, and power. Added Harmonic Order Table presents harmonic measurement values and spectral displays for up to 9 waveforms. Users may perform calculations in both steady-state and dynamic operating conditions. Read More

test & measuring instruments

USB 3.1 Protocol Analyzer incorporates Power Delivery exerciser.

October 19, 2015

Voyager M310C provides Power Delivery (PD) exerciser capability that lets developers verify functionality, error recovery, and compliance for PD chipsets and end-products. Also, software adds enhancements for PD debug: PD triggering, event stacking, transaction grouping, and Verification Script Engine (VSE). PD exerciser supports traffic generation, including provider and consumer device emulation, and script-based authoring environment provides pre-defined templates for all PD packet types. Read More

test & measuring instruments

Protocol Analyzer/Exerciser tests PCI Express 4.0 designs.

October 7, 2015

Providing 16 GT/s traffic generation on devices with link widths up to 16 lanes, Summit™ Z416 addresses needs of PCI Express developers. In addition to traffic generation, protocol analysis featuring CATC Trace™ and other traffic displays and data reports are available. Exerciser functions can be used for traffic generation and device/host emulation, while error injection functions enable developers to test error recovery routines important to interoperability of PCIe 4.0 products. Read More

communication systems & equipment, optics & photonics, test & measuring instruments

Coherent Optical Receivers feature bandwidth up to 70 GHz.

October 5, 2015

Pairing with LabMaster 10-65Zi-A oscilloscope, 70 GHz Model IQS70 provides system bandwidth of 65 GHz, delivering solution for characterizing 56 Gbaud communications systems and enabling detection up to 130 GBaud. For lower-rate applications, 42 GHz Model IQS42 provides test platform for up to 32 Gbaud DP-16QAM or DP-QPSK when used with 36 GHz LabMaster 10-36Zi-A. Optical-LinQ software runs within oscilloscope, providing measurement and visualization of optically modulated signals. Read More

software, test & measuring instruments

Portable M-PHY Protocol Analyzer supports UniPort/UFS.

September 4, 2015

Eclipse X34 monitors, captures, decodes, and analyzes protocol traffic from multiple interfaces: SSIC, MPCIe, and UniPort/UFS. Configurable analyzer, supporting GEAR1, GEAR2, and GEAR3 at high speeds and G0-G7 at low speed and low power, captures up to 4 lanes of data traffic (up to 8 when linked to another Eclipse X34). Trace-buffer options exist for up to 3 GB for single analyzer and 64 GB in 2-unit expanded mode. Probing options include SMA, multi-lead solder down, and mid-bus probing. Read More

test & measuring instruments

Benchtop Oscilloscope offers trigger and decode capabilities.

July 29, 2015

With trigger and decode capabilities, WaveSurfer 3000 provides all tools needed to analyze and debug automotive systems using CAN FD and/or FlexRay serial data communications standards. Protocol analysis capabilities enable engineers and technicians working with these standards to gain insight into their systems, correlating physical layer signals and protocol layer data on single display. CAN FD and FlexRay trigger can isolate Frame IDs, specific data packets, remote frames, and error frames. Read More

electronic components & devices, test & measuring instruments

Probe Adapters enable 3rd-party probe and current sensor use.

July 14, 2015

Permitting connection of select Tektronix TekProbe interface level II probes to any ProBus-equipped Teledyne LeCroy oscilloscope, TPA10 TekProbe® Probe Adapter automatically detects which probe is attached, supplies all necessary power and offset control to probe, and communicates probe signal to oscilloscope. CA10 Current Sensor Adapter is programmable and customizable to work with third-party current measurement devices that output voltage or current signals proportional to measured current. Read More

sensors, monitors & transducers, test & measuring instruments

Differential Probes offer 2 kV and 8.4 kV safety ratings.

July 14, 2015

Safety-rated for 8,485 V and 6,000 Vrms, Model HVD3605 provides test coverage of 5 kV class electrical apparatus and power electronics. Probe has 1% gain accuracy, wide differential voltage range of 7,000 V, and 100 MHz of bandwidth. Model HVD3206, safety-rated for 2,000 V and 1,500 Vdc per IEC/EN 61010-031:2015 standard, addresses solar PV string inverter requirements for 1,500 Vdc inputs. Probe has 1% gain accuracy, 2,000 Vpk differential voltage range, and 120 MHz bandwidth. Read More

software, test & measuring instruments

Protocol Analyzer enables line-rate Wireshark analysis.

June 22, 2015

Facilitating Ethernet packet capture/inspection, Hammerhead™ for SierraNet™ Protocol Analysis systems integrates dedicated, line-rate protocol analyzer with Wireshark™ network packet capture application. Solution melds SierraNet recording abilities and Wireshark's UI to supply complete, upper level traffic captures. When nanosecond trigger granularity is required, Net Protocol Suite™ provides tools, which includes timer and counter functions, for creating complex and detailed capture solutions. Read More

software, test & measuring instruments

Protocol Analyzer works with USB Type-C, Power Delivery 2.0.

May 7, 2015

Mercury T2C pocket-sized, 5.8 oz, hardware-based USB protocol analyzer supports USB Type-C and Power Delivery 2.0 standards, including capture and decoding of all packets over USB Type-C Configuration Channel (CC). Such CC packets include negotiation of USB current capabilities and entrance to/exit from Alternate Modes. Included adapters enable use with existing devices and hosts, and CATC Trace™ display is standard. Read More

sensors, monitors & transducers

Current Probe provides sensitivity down to 1 mA/div.

April 16, 2015

Sensitivity of CP030A and CP031A probes, which feature respective bandwidths of 50 and 100 MHz, lets users measure current from mA range up to 30 Arms continuous and 50 A peak, all with same probe. Accommodating space restrictions on crowded boards, design includes jaws sized to probe currents in tight spaces while retaining ability to clamp onto up to 5 mm dia conductors. Both probes connect to oscilloscope via ProBus interface and do not require additional hardware. Read More

software, test & measuring instruments

SAS/SATA Protocol Analyzer supports active optical cables.

April 10, 2015

By supporting Active Optical Cables (AOC) and SAS Connectivity Management, M124A helps support external RAID and server OEMs requiring extended reach for SAS-based storage applications. This 12 Gbps solution, which lets developers test external storage connections that utilize active copper cables and AOC, can also read embedded EEPROM data and display key fields. Analyzer also supports use of optical cables in all configurations, including analyzer, jammer, and traffic generator modes. Read More

services, software

PHY Test Suite simplifies USB3.1 compliance testing.

April 2, 2015

Providing automated transmitter and receiver compliance testing, characterization, and debug, QPHY-USB3.1-Tx-Rx Software can perform tests on both 5 Gbps Gen1 and 10 Gbps Gen2 devices according to USB 3.1 specifications. Tx testing is performed using 16 GHz oscilloscope, while Rx testing is performed using PeRT(3) Protocol Enabled Receiver and Transmitter Tolerance Tester. QualiPHY automated test framework provides connection diagrams, automated oscilloscope operation, and report generation. Read More

software, test & measuring instruments

Automated Test Software ensures physical layer compliance.

March 18, 2015

Providing automated physical layer transmitter compliance test capability for MIPI M-PHY standard, QPHY-MIPI-MPHY Software can perform testing on HS-MODE, PWM-MODE, and SYS-MODE signals at all currently specified GEARs. Active termination adapter ensures connection between device under test and oscilloscope is made in high fidelity manner. Comprehensive protocol decode, physical layer testing, and eye diagram analysis tool simplifies M-PHY system and interconnect design and debug. Read More

sensors, monitors & transducers, test & measuring instruments

Motor Drive Analyzer leverages high-definition oscilloscope.

February 11, 2015

Motor Drive Analyzers (MDAs) of MDA800 Series combine 3-phase power analyzer static (steady-state) calculations, dynamic 3-phase power and mechanical motor analysis capabilities, and high-bandwidth (350 MHz, 500 MHz, and 1 GHz) embedded control system debug in one instrument. Based on HDO8000 oscilloscope, products come standard with 8 input channels (16 digital channels optional) with 12-bit resolution, 2.5 GSps sample rate, and up to 250 Mpts/ch acquisition memory. Read More

software, test & measuring instruments

Oscilloscope offers expanded multi-instrument capabilities.

January 27, 2015

WaveSurfer 3000 oscilloscope supports WS3K-AUTO package, which includes both CAN and LIN trigger and decode capabilities, as well as WS3K-FG function generator, which includes arbitrary waveform capabilities. With CAN and LIN trigger and decode capabilities added to protocol analyzer, all tools needed to analyze and debug automotive systems using CAN and/or LIN serial data communication standards are present. Tool also supports digital voltmeter (DVM) capabilities.<br /> Read More

Other Company News from
Teledyne LeCroy Corporation