Company News

Custom MMIC

300 Apollo Drive, Chelmsford, MA, 01824, USA

  • 978-467-4290

Latest New Product News from
Custom MMIC

Communication Systems & Equipment, Electronic Components & Devices, Mechanical Power Transmission

CMD242 and CMD244 Distributed Amplifiers are suitable for aerospace applications.

February 16, 2017

Available in CMD242 and CMD244 models, Distributed Amplifiers are used in aerospace, commercial and military applications. Featuring 10.5 dB gain with ±1 dB flatness and 4.4 dB noise figure, CMD242 delivers P1dB of 18 dBm and OIP3 of 27 dBm at 20 GHz output and consumes 100 mA current. Offering 8 dB gain and 2.5 dB noise figure at 10 GHz, CMD244 provides P1dB of 25 dBm, OIP3 of 32 dBm... Read More

Communication Systems & Equipment, Electronic Components & Devices, Mechanical Power Transmission

GaAs Low Phase Noise Amplifier offers -165dBc/Hz phase noise.

January 21, 2017

Used in Local Oscillator and high sensitivity receiver circuits for military and instrumentation applications, GaAs MMIC Low Phase Noise Amplifier comes in three die and two QFN packaged MMICs in 6 to 22 and 30 to 40 GHz freqency range. Operated with power supply of 3 to 5 volts, amplifier family is self- biased. CMD245 and CMD245C4 are operated in 6 to 18 GHz frequency and CMD246 C4 is... Read More

Communication Systems & Equipment, Electronic Components & Devices, Mechanical Power Transmission

CMD240P4 MMIC Distributed Amplifier eliminates external RF port matching.

January 12, 2017

Featuring Pb free RoHS compliant 4 x 4 mm QFN package, CMD240P4 GaAs MMIC Distributed Amplifier operates from DC to 22 GHz at -40 to 85°C temperature. Operating in 3 to 8 V bias voltage with 80 mA bias current, unit offers 2.2 dB low noise figure and 28 dBm IP3. Offering 15 dB stable gain and 1 dB compression point of 19 dBm, unit is designed with 50 Ohm matching at each port... Read More

Electronic Components & Devices

Frequency Doubler offers optimized isolation in small package.

October 24, 2016

Operating with input frequency range of 4–8 GHz, CMD225C3 GaAs MMIC Frequency Doubler can be driven with +15 dBm input signal with low conversion loss of 13 dB and optimized Fo and 3Fo isolations of at least 47 dBc. Device is 50 Ω matched to eliminate need for RF port matching. Housed in RoHS-compliant, 3 x 3 mm surface mount package, passive frequency doubler is suited for low phase noise... Read More

Electronic Components & Devices

GaAs MMIC Switches offer high isolation and low loss.

September 19, 2016

Supplied in ROHS-compliant, 4 x 4 mm, SMT package, non-reflective CMD234C4 and CMD235C4 are suited for military and instrumentation applications and provide switching speed of 66 ns and input P1dB of 21 dBm. While CMD234C4 is DC–18 GHz broadband MMIC SP3T switch featuring 2.4 dB insertion loss and isolation of 40 dB at 10 GHz, CMD235C4 is DC–18 GHz broadband MMIC SP5T switch offering... Read More

Communication Systems & Equipment, Electronic Components & Devices

Distributed Amplifier ranges from 2-18 GHz. .

September 8, 2016

Supplied in 4 x 4 mm QFN package, CMD233C4 Broadrange Distributed Amplifier™ features low noise figure of 4.5 dB and output 1 dB compression point of +20.5 dBm. Wideband GaAs MMIC device delivers over 9 dB of gain and operates from single 3–6 V supply. With 50 Ω matched design, amplifier eliminates need for external DC blocks and RF port matching. Applications include military, space, and... Read More

Communication Systems & Equipment, Electronic Components & Devices

Driver Amplifiers range from 2-9 GHz with high gain.

August 30, 2016

Housed in 3 x 3 mm package, CMD232C3 GaAs MMIC Driver Amplifier functions from 2–9 GHz and delivers over 15 dB of temperature stable gain with output 1 dB compression point of 17 dBm, and output IP3 of 23 dBm. CMD231C3 GaAs MMIC Driver Amplifier, offered in 3 x 3 mm leadless surface mount package, operates from 2–6 GHz while delivering over 14.5 dB of temperature stable gain. Device has... Read More

Communication Systems & Equipment, Electronic Components & Devices

Wideband Distributed Amplifier offers 14 dB gain, high linearity.

July 7, 2016

From 2–20 GHz, CMD238 BroadRange Distributed Amplifier™ delivers 14 dB of gain with output P1dB of +26 dBm, output IP3 of +34 dBm, and 2nd harmonic level of -33 dBc. This GaAs MMIC (monolithic microwave integrated circuit) distributed amplifier, which operates from 5–8 V power supply, is pin-compatible with CMM0014 amplifier and features 50Â Ω matched design that eliminates need... Read More

Communication Systems & Equipment, Electronic Components & Devices

Wideband Driver Amplifier features 26-35 GHz frequency range.

July 5, 2016

Operating from single 5 V supply and drawing just 90 mA typical, Model CMD243 offers 15.5 dB of gain with output P1dB compression point of +21 dBm. Balanced design provides good VSWR matching, along with optimized stability and gain flatness. Self-biasing GaAs MMIC amplifier is a 50 Ω matched design, which eliminates need for external DC blocks and RF port matching. Applications include... Read More

Communication Systems & Equipment, Electronic Components & Devices

Distributed Amplifiers offer positive gain slope.

June 29, 2016

From DC–22 GHz, ultra-wideband BroadRange™ CMD240 delivers over 15 dB of gain with mid-band noise figure of 2.2 dB, output 1 dB compression point of 19 dBm, and output IP3 of 28 dBm at 10 GHz with 5 V supply. Wideband BroadRange™ CMD241, operating from 2–22 GHz with low mid-band noise figure of 2.3 dB, features output IP3 of +28 dBm, low supply current of 74 mA, and 13 dB of gain with max... Read More

Communication Systems & Equipment, Electrical Equipment & Systems, Electronic Components & Devices

Switches and MMIC Amplifiers deliver ultra wideband operation.

May 26, 2016

Operating from DC to 18 GHz, non-reflective GaAs switches CMD234C4 (SP3T) and CMD235C4 (SP5T) provide 40 dB isolation @ 10 GHz and respective insertion loss values of 2 and 2.5 dB. Distributed amplifiers CMD240 (DC to 22 GHz) and CMD241 (2–22 GHz) offer respective noise figures down to 2.2 and 2.3 dB and gain values of 15 and 13.5 dB. Operating from 26–35 GHz, CMD243 wideband... Read More

Communication Systems & Equipment, Electronic Components & Devices, Mechanical Power Transmission

Driver Amplifier offers high gain over wide bandwidth.

March 11, 2016

Featuring frequency range of 2–9 GHz, Model CMD232 is suited for military, space, and communications systems that require small size and high linearity. At 6 GHz, GaAs MMIC driver amplifier delivers greater than 15 dB of gain with corresponding output 1 dB compression point of +17 dBm and output IP3 of 23 dBm. Device's 50 Ω matched design eliminates need for external DC blocks and RF... Read More

Communication Systems & Equipment, Electronic Components & Devices

Driver Amplifier (2-6 GHz) serves RF and microwave applications.

February 26, 2016

At 4 GHz, CMD231 wideband GaAs monolithic microwave integrated circuit (MMIC) driver amplifier delivers >14.5 dB gain with corresponding output 1 dB compression point of +13.5 dBm and output IP3 of 23.5 dBm. Unit operates from +3 to +6 V supply and has 50Â Ω matched design. Latter eliminates need for external DC blocks and RF port matching while also offering full passivation. Areas... Read More

Electronic Components & Devices

GaAs MMIC Amplifier offers low noise figure over wide bandwidth.

February 18, 2016

Supporting 2–20 GHz bandwidth, CMD233 distributed low noise amplifier operates from +3 to +6 V supply and suits military, space, and communications systems. Amplifier is 50Â Ω matched design, which eliminates need for external DC blocks and RF port matching, and offers full passivation for increased reliability and moisture protection. At 10 GHz, amplifier delivers >9 dB of gain... Read More

Electronic Components & Devices

GaAs MMIC Frequency Multipliers span 8-40 GHz.

November 20, 2015

Available in die form, Model CMD213 broadband x2 active frequency multiplier covers input frequency range of 8–15 GHz. When driven by +17 dBm signal, device provides +17 dBm output power from 30–40 GHz. Also supplied in die form, Models CMD226 and CMD227 are broadband x2 passive frequency multipliers with input frequency ranges of 7–11 GHz and 8–15 GHz, respectively. Typical... Read More

Electrical Equipment & Systems, Electronic Components & Devices

MMIC SPDT Switch covers DC to 26 GHz.

November 17, 2015

Supplied in die form, Model CMD230 features low insertion loss of 1.4 dB, input IP3 of 37 dBm, and high isolation of 40 dB at 13 GHz. General-purpose, broadband device operates using complementary control voltage logic lines of 0/-5 V and requires no bias supply. Applications include microwave radio, test instrumentation, and military radar/EW. Read More

Communication Systems & Equipment

Balanced LNA delivers high gain and low-noise.

November 12, 2015

Suited for EW and communication systems with space constraints and low power consumption requirements, 9–18 GHz CMD223 has 50 Ω matched design that eliminates need for external DC blocks and RF port matching. Full passivation promotes reliability and provides moisture protection. At 13.5 GHz, this balanced low-noise amplifier (LNA) delivers >22 dB of gain with corresponding output 1 dB... Read More

Electronic Components & Devices, Mechanical Power Transmission

Broadband MMIC GaN LNA meets high-RF power survivability needs.

April 29, 2015

Fabricated in GaN technology and supplied in leadless, 4 x 4 mm, ceramic package, CMD219C4 broadband MMIC low-noise amplifier (LNA) operates from 4–8 GHz with gain of 22.5 dB, noise figure of 1.0 dB, and output 1 dB compression point of +17 dBm. Product withstands RF input power levels of up to 5 W without permanent damage. Areas of use include microwave radios and C-band applications,... Read More

Communication Systems & Equipment, Electronic Components & Devices

Low Noise Amplifier operates from 10-14 GHz.

April 17, 2015

Housed in leadless 3 x 3 mm plastic surface-mount package, Model CMD189P3 delivers greater than 19 dB of gain with corresponding output 1 dB compression point of +4 dBm and noise figure of 1.4 dB. Broadband MMIC device has 50 Ω matched design, which eliminates need for external DC blocks and RF port matching. Applications include point-to-point and point-to-multipoint radios, military end-use,... Read More

Communication Systems & Equipment, Electronic Components & Devices, Test & Measuring Instruments

Double-Balanced Mixer offers high isolation, low conversion loss.

April 7, 2015

Supplied in SMT package, CMD177C3 offers 6.5 dB conversion loss, 45 dBc LO to RF isolation, and +18 dBm input IP3 across 6–14 GHz bandwidth. Minimum LO drive requirement is +9 dBm, with saturation reached at levels over +13 dBm, and IF bandwidth of DC to 5 GHz allows support of diverse frequency conversion plans. Supporting use in up-/down-converting systems, product can be used... Read More

Other Company News from
Custom MMIC