Company News

Share Like Tweet Add Email

Latest New Product News from
ON Semiconductor

Vision Systems, Sensors, Monitors & Transducers

CMOS Image Sensors address Hi-Res industrial/traffic applications.

November 12, 2014

Available in mono, color, and extended NIR variants, PYTHON 2000 and 5000 offer respective resolutions of 2.3 and 5.3 MP for general-purpose image sensing applications. Both sensors leverage in-pixel CDS (ipCDS) technology, which enables global shutter imaging with Correlated Double Sampling (CDS) in compact pixel size. PYTHON pixel allows capture of fast moving scenes without distortion by combining read noise of 9 e- with 7.7 V/lux sensitivity and frame rates as high as 850 fps (VGA). Read More

Computer Hardware & Peripherals, Electronic Components & Devices

System-in Package enables sensing in portable medical devices.

September 22, 2014

Utilizing advanced die stacking technology to integrate custom-designed analog front-end on top of 32-bit Application Specific Standard Product microcontroller, Struix Semi-Customizable SiP enables precision sensing and monitoring in devices such as glucose monitors, heart rate monitors, and electrocardiogram analyzers. ULPMC10 microcontroller, using 32-bit ARM® Cortex®-M3 core running up to 30 MHz, incorporates 512 KB on-chip Flash memory and 24 KB SRAM to store critical program and user data. Read More

Computer Hardware & Peripherals, Electronic Components & Devices

HART CMOS Modem IC serves industrial communications applications.

June 17, 2014

Supplied in 32-pin QFN package, NCN5193 complies with physical layer specifications set by HART standard while requiring minimal additional components. Single-chip device, operating from -40 to +85°C, supports Bell 202 shift frequencies from 1,200–2,200 Hz and can deliver 1,200 bps half-duplex data rate. Along with built-in power amplifier, 17-bit sigma-delta DAC, and watchdog mechanism, product has 3–5.5 V range and draws 190 µA in standby with system clock running (76 µA without clock). Read More

Mechanical Components & Assemblies

Qualified IP Blocks minimize risk of design re-spins.

May 14, 2014

Available on ONC18 180 nm process technology, Qualified IP Blocks bring predictability to product design cycles. Products provide functions that range from small-pitch column-parallel ADC and cryogenic-compatible LVDS drivers to ultra-low power oscillator and very-small footprint OTP memory. IP Blocks are applicable to wide range of customer end-markets including military/aerospace, medical, consumer, computing, communications, and automotive. Read More

Sensors, Monitors & Transducers

CMOS Image Sensors bring versatility to industrial applications.

April 28, 2014

With respective resolutions of 300 K (VGA), 500 K (SVGA), and 1.3 MP (SXGA), PYTHON 300, 500, and 1300 address general-purpose industrial image sensing applications. These pin-to-pin compatible global shutter image sensors combine flexible configuration with required resolution with speed and sensitivity; read noise is <9 e-, sensitivity is rated at 7.7 V/lux sensitivity, and frame rates reach up to 850 fps. Products also feature configurable sequencer and operate from -40 to +85°C. Read More

Computer Hardware & Peripherals, Electronic Components & Devices, Green & Clean

Digital Signal Processors target hearing aid market.

April 1, 2014

Featuring 16 channels of wide dynamic range compression, RHYTHM R3920 provides audiologists freedom of fine granularity fitting. Impulse noise reduction monitors and attenuates sharp, impulsive noises, while iSceneDetect™ algorithm discerns various sound environments and selects most appropriate mode automatically. With pre-fit set of audiology parameters, RHYTHM R3110 brings noise reduction and feedback cancellation to hearing aids in emerging geographies and entry-level markets. Read More

Computer Hardware & Peripherals, Electronic Components & Devices

Optical Image Stabilization IC targets smartphone cameras.

November 15, 2013

Supplied in 2.57 x 3.22 x 0.69 mm lead-free/halogen-free package, Model LC898111AXB-MH combines controller and driver functionality, enabling precise suppression control of camera shaking and allowing implementation of pan/tilt function for walk-and-take situations. IC also includes 2-channel position sensing circuit, gyro-filter interface circuit, and lens-server circuit. Output of integrated PWM driver minimizes power consumption as well as effects of noise on image quality. Read More

Computer Hardware & Peripherals, Electronic Components & Devices

DSP-Based System-on-Chip targets hearing aids and implants.

November 1, 2013

Based on quad-core architecture with 24-bit open-programmable CFX DSP core, Ezairo® 7100 Series includes ARM® Cortex-M3 processor that supports wireless protocols and complements DSP core with error-correction and audio coding. HEAR configurable accelerator engine supports audio processing tasks, while programmable Filter Engine supports ultra-low delay audio path of 44 µs. Manufactured using 65 nm process technology, SoC integrates analog front-end circuitry with input dynamic range of 110 dB. Read More

Controls & Controllers, Electrical Equipment & Systems, Electronic Components & Devices

Power Management ICs target automotive applications.

November 1, 2013

Running off 2–44 V input voltage, NCV8876 non-synchronous boost controller with automatic wake up and shutdown functions is designed to supply minimum output voltage during start-stop conditions to counteract sag in vehicle’s battery voltage. Featuring 2.1 MHz switching frequency, NCV896530 dual channel step-down DC-DC converter is targeted at driver assistance systems. Both channels are externally adjustable from 0.9–3.3 V and can source currents up to 1,600 mA. Read More

Electronic Components & Devices

Capacitive Touch Control IC has high noise immunity.

November 23, 2012

Model LC717A00AR capacitance-to-digital converter IC features 8 capacitor sensing inputs and 8 digital outputs. Unit's logic circuit detects on/off state of each input and outputs result, while serial interface can be configured for I²C or SPI operation, allowing parameters to be modified using external MCU. Compatible with supply voltage of 2.6-5.5 V, IC consumes 320 µA at 2.8 V. It operates over temperature range of -40 to +105°C and is available in lead-free VCT28 package. Read More

Electronic Components & Devices

Active Spread Spectrum Clock Generator ICs reduce EMI at source.

November 20, 2012

Supplied in 8-pin, 2 x 2 x 0.8 mm WDFN package, P3P8203A supports 3.3 V input, 18–36 MHz frequency range, and analog control of spread spectrum deviation via external resistor. Choice of external resistor value lets designers customize applications to achieve desired EMI reduction. Supplied in 4-pin, 1 x 1.2 x 0.8 mm WDFN package, P3MS650100H and P3MS650103H support 1.8–3.3 V input, 0.45%–1.4% typ spread spectrum deviations, and 15–60 MHz frequency range. Read More

Electrical Equipment & Systems, Electronic Components & Devices

DC-DC Converter IC configures voltage output to match load.

November 19, 2012

Using modular output strength drive combined with automatic PWM and PFM, Model NCP6338 can adapt efficiency performance to load profile and save battery life in smartphones and tablets. Step-down converter has programmable output voltage from 0.6–1.4 V in mV increments while operating down to input voltage of 2.3 V. Offered in 2.06 x 2.46 x 0.6 mm CSP-30 RoHS-compliant package, 6 A device operates at 3 MHz switching frequency with large selection of output L-C filters. Read More

Electronic Components & Devices

Wideband Noise Reduction SoC enhances voice capture devices.

September 27, 2012

Without requiring special tuning, drop-in BelaSigna® R262 provides wideband single- or dual-microphone noise reduction in range of voice capture devices and acoustic environments. SoC manages stationary and non-stationary background and mechanical noise, resulting in improved voice clarity and intelligibility. Along with 8 kHz bandwidth wideband voice capture for VoIP communication, SoC offers de-reverberation capability and 360° voice pick-up. Read More

Electronic Components & Devices

Field Stop IGBTs suit inductive heating applications.

May 18, 2012

Offering 15, 20, and 25 A current ratings, respectively, Models NGTB15N120, NGTB20N120, and NGTB25N120 utilize deep trench technology and wafer thinning techniques to enable low turn-off losses while maintaining low ON state voltage during turn-on. Housed in TO-247 package with 1,200 V rating, devices enable power conversion for wide range of demanding applications, including induction cook tops, rice cookers, and other small kitchen appliances. Read More

  • 1

Other Company News from
ON Semiconductor