Company News

OFS (Headquarters)

2000 Northeast Expressway, Norcross, GA, 30071, USA

  • 888-342-3743

General Information:
Sherry Salyer
Phone: +1 (770) 798-4210
E-mail this person

Latest New Product News from
OFS (Headquarters)

Communication Systems & Equipment, Electrical Equipment & Systems, Optics & Photonics, Transportation Industry Products

FlightLinx® PLUS Fiber Optic Cable comes in 1.8 mm size.

Sep 21, 2017

FlightLinx® PLUS Fiber Optic Cable is designed for inflight entertainment, internet access, networking and display systems. Single jacket cable meets ARINC 802 performance standards. Unit is suitable for lighter aircraft applications.

Read More

Communication Systems & Equipment, Electrical Equipment & Systems, Optics & Photonics

AccuRibbon® DC Fiber Optic Cables feature super-absorbent polymer tapes.

Sep 13, 2017

AccuRibbon® DC Fiber Optic Cables are available in dielectric and metallic/armored versions. Units are offered in fiber counts up to 864. Gel-free ribbon cables are used to reduce cable preparation time and cable weights. Products meet Telcordia GR-20 Issue 4 requirements.

Read More

Communication Systems & Equipment, Electrical Equipment & Systems, Optics & Photonics

OFS' Cables feature fiber optic rollable ribbon technonogy.

Sep 13, 2017

AccuTube+ Rollable Ribbon Fiber Optic Cables are available with 1728 and 3456 fibers. Units can be installed in 11/4 in. and 2 in. ducts. Indoor/outdoor AccuRiser™ Fiber Optic Cables are also offered in 144 and 288 fiber rollable ribbon versions. Cables offer mass fusion splicing and are suitable for tough indoor routing applications.

Read More

Architectural and Civil Engineering Products

InvisiLight® Façade Solution is integrated with SlimBox™ portfolio.

Jun 14, 2017

Available with twelve or twenty four fiber count rated cables with 3.0 and 3.8 mm diameter respectively, InvisiLight® Façade Solution is suitable for low-rise buildings and garden style dwelling units. With 2.5 mm bend radius, unit’s cable can be installed vertically on face of building or tucked behind using clips.

Read More

Communication Systems & Equipment, Computer Hardware & Peripherals, Electrical Equipment & Systems, Optics & Photonics

Indoor/Outdoor Ribbon Cable features high fiber density.

Oct 03, 2016

Intended for data center and central office networks, AccuRiser™ Indoor/Outdoor Ribbon Cable allows engineers and technicians to bypass building entrance terminal and route cable directly to where it is needed. Gel-free construction helps minimize cable preparation time for splicing. Cable meets demands of outdoor route between buildings while providing fire rating needs of indoor... Read More

Electrical Equipment & Systems

Underground Terminal supports burial and aerial applications.

Sep 22, 2016

Used to connect distribution cables in outside plant network to drop cables in FTTx networks, SlimBox™ Underground Terminal enables quick connections through fusion splicing, splice on connectors, or mechanical connectors. Unit has one area for storage and splicing and separate area for management and activation of subscribers. Accepting entry cables with max diameter of 17.5 mm, terminal can... Read More

Communication Systems & Equipment, Optics & Photonics

Ultra Long Haul Optical Fiber supports transoceanic distances.

Mar 29, 2016

Enabling launch of higher signal power into span and reduction of amplifier noise, TeraWave™ SCUBA Optical Fiber is optimized for ultra-long haul networks up to 12,000 km using advanced modulation formats and coherent detection. Effective area (153 m²), cabling performance in C- and L-bands, and attenuation (0.155 dB/km @ 1550 nm) promote reliable, coherent transmission at 100 Gbps... Read More

Materials & Material Processing, Optics & Photonics

LMA Double-Clad Optical Fibers expand laser design capabilities.

Mar 15, 2016

TrueLase™ 10/130 Active and Passive LMA Double-Clad Optical Fibers are ytterbium-doped gain and matching passive fibers that enable production of performance-, reliability-, and consistency-optimized lasers and amplifiers utilizing true single-mode fiber designs. Read More

Communication Systems & Equipment, Electrical Equipment & Systems, Optics & Photonics

Fiber Microcable enhances metro network performance.

Feb 17, 2016

Able to increase fiber density and enhance performance for metro networks, MiDia® 2GX features bend-optimized AllWave® FLEX and AllWave® FLEX+ fibers that enables tight, low-loss bends without risking fiber strength and long-term reliability. Space occupied by fibers help minimize cabled diameters to optimize use of network duct systems and infrastructure. Generally available with... Read More

Optics & Photonics

Optical Fiber supports terabit transport market.

Sep 29, 2015

Designed to optimize performance of long distance coherent systems, TeraWave™ Ultra Low Loss Fiber provides 50% greater effective area than G.652.D fiber and ≤0.17 dB/km loss at 1,550 nm. In addition, fiber combines effective area of 125 square microns, optimized cabling performance, and reduced attenuation compared to conventional single-mode fibers. Read More

Optics & Photonics

Multimode Fiber supports duplex 100 Gbps transmission via SWDM.

Sep 22, 2015

LaserWave® FLEX WideBand meets and is fully backwards compatible with current OM4 requirements. Supporting traffic over wavelengths from 850–950 nm, solution enables multiple lanes of traffic over same strand of fiber to improve bandwidth capacity while maintaining cost efficiacy for short-distance applications up to 300 m or more. Product will support 4 wavelength 100 Gbps... Read More

Material Handling & Storage, Optics & Photonics

MDU Fiber Optics Router aids multiple dwelling unit deployment.

Sep 04, 2015

Enabling virtually invisible fiber routing inside residential and business multiple dwelling units (MDUs), InvisiLight® MDU helps accelerate adoption of fiber optic service. This 12-fiber optical unit can be surface mounted in hallways, on exterior of each apartment or office, and between floors to connect subscribers to ultra-high speed services. EZ-Bend Optical Fiber enables solution to... Read More

Communication Systems & Equipment, Electrical Equipment & Systems, Optics & Photonics

Fiber Microcable increases capacity in confined areas.

Jun 30, 2015

Available with 12–144 fibers from full range of OFS application-specific fibers, MiDia® FX Cable features optimized buffer tubes and jacket rifling designed for optimized air-blown installation performance using microducts. Mechanical and environmental protections are in compliance with Telecordia GR-20, and design helps facilitate fiber cable deployment. Increasing capacity and fiber... Read More

Optics & Photonics

Handheld Fusion Splicer supports FTTH applications.

Jun 29, 2015

Intended for Fiber-to-the-Home technicians, NINJA NJ001 features detachable V-groove that enables technicians to remove and thoroughly clean part in minutes. Three LED lights illuminate entire splicing chamber with more than 300 Lux for working in low-light environments. Supporting 100 splicing and heating cycles in 1 charge, splicer uses powerful fiber propulsion motors to complete splices with... Read More

Electrical Equipment & Systems

Fiber Microcable increases capacity in limited-space areas.

Jun 29, 2015

Allowing providers to deploy as needed, MiDia® FX Cable accelerates fiber cable deployment and increases capacity and fiber density in space-limited locations. This microcable product, which provides mechanical and environmental protection in compliance with Telecordia GR-20, features optimized buffer tubes and jacket rifling designed for air-blown installation using microducts. Full range... Read More

Optics & Photonics

Fiber Laser Beam Combiner features 6 kW rating.

Jun 23, 2015

With 6x1 TrueM2-14 Beam Combiner, machine manufacturers can build their own fiber laser sources using modular architecture, producing customized fiber lasers based on application requirements. Combiner can be mated with up to 6 TrueMode-kW laser cavity modules or other compatible modules. Measuring 300 x 150 x 15 mm, product provides >97% transmission performance, up to 1,100 W input power per... Read More

Communication Systems & Equipment

Optical Fiber Assembly makes use of OCT capabilities.

Feb 20, 2015

Optical Coherence Tomography (OCT) optical fiber assembly capabilities enables building of optical fiber probes with flexible tip lensing designs to meet critical OCT imaging specifications, such as insertion loss, internal back reflection, beam size, and working distance. Fiber manufacturing can incorporate such unique features as select cutoff, specific numerical apertures, graded... Read More

Optics & Photonics

Beam Combiner features optical power rating of 4 kW.

Feb 20, 2015

With TrueM2 platform, machine manufacturers can build their own fiber laser source using modular architecture and produce customized fiber laser based on specific requirements. Featuring 1,100 W max input per port and greater than 97% transmission, 4 x 1 TrueM2-14 can be mated with up to four TrueMode-kW laser cavity modules, or other compatible modules. Read More

Communication Systems & Equipment, Electrical Equipment & Systems, Optics & Photonics

All-Dry Fiber Microcable improves safety and productivity.

Feb 17, 2015

While improving safety and productivity, MiDia® Dry FX microcable helps reduce fiber cable installation expense. Fibers emerge from buffer tubes ready for fusion splicing or optical testing, eliminating need for cleaning products. Available in 3 constructions containing up to 144 fibers, product comes with bend-insensitive AllWave® + fiber. Entirely dry cable technology replaces... Read More

Communication Systems & Equipment, Optics & Photonics

Connector and Termination Kit hasten fiber optic repair/install.

Oct 14, 2014

Attaching to cable via mechanical means, LC Crimp and Cleave Connector utilizes optical and mechanical properties of HCS® (Hard Clad Silica) and Graded Index HCS® optical fibers. GiHCS® optical fiber in Low Smoke Zero Halogen (LSZH) cable construction with Crimp and Cleave LC connectors accelerates fiber optic cable installation/repair by technicians without any power, epoxy, gel, or... Read More

Other Company News from
OFS (Headquarters)

Jan 20, 2010

x x