Company News

Strong Hand

7141 Paramount Blvd, Los Angeles, CA, 90660, USA

  • 562-949-8625

General Information:
Pamela Farley
Phone: 800-989-5244 ext 213
E-mail this person

Latest New Product News from
Strong Hand Tools

material handling & storage, welding equipment & supplies

Variable Height Rest enhances welding table usability.

September 25, 2014

BuildPro™ Adjustable Rest can be inserted into any fixturing hole on BuildPro Modular Welding Table surface for use as support or rest for setting stock at uniform height, aligning different sized stock, and providing welding clearance. Manual operation via hand-actuated turning of knurled band allows precise height adjustments over 2–2 ¾ in. range. While press-fit BuildPro V-Blocks support round pipes, press-fit BuildPro V-Block Spacers add .45 in. height and support flat stock/square tubes. Read More

machinery & machining tools, material handling & storage, portable tools

Storage Platform keeps grinders and accessories within reach.

September 25, 2014

With magnetic or universal c-clamp base, Grinder Rest respectively allows tabletop or table edge storage of frequently used handheld, 4½ or 5 in. grinders and grinder components. Product ensures safe storage of grinder, wrench, and spare discs and keeps them near work area to promote efficiency in shop or field. While cable wrap hook allows safe storage of grinder's electrical cord, bracket has open design that lets grinder be placed for storage and retrieved whenever needed. Read More

material handling & storage

Scissor Lift Platforms enable ergonomic welding table positioning.

September 24, 2014

Strong Hand Tools® Scissor Lift Platforms increase productivity and worker comfort by setting BuildPro Modular Welding Tables at ideal height for each project. Electric-hydraulic platforms, depending on model, raise table to heights from 8.5–48 in. and support loads from 1,500–4,200 lb. Along with hand-operated pushbutton power control, features include chip-resistant powder coated finish with rounded table corners. Read More

material handling & storage, welding equipment & supplies

Modular Clamp bends to hold parts at any angle.

September 24, 2014

Fully articulated and adjustable, Third Hand Modular Clamp holds parts at any position for hands-free access while user tack welds, cuts, grinds, sands, or paints. Two smooth ball joints allow user to rotate clamp arm 360° and bend arm to any position. Clamp position is securely locked and unlocked with turn of socket head cap screws. Measuring 1 ½ in wide, portable clamp has universal C-Clamp base with 2 in. opening for mounting on any flat, square, or angled surface. Read More

material handling & storage, portable tools, welding equipment & supplies

Clamping Squares work with modular welding tables.

February 10, 2014

Designed for use with BuildPro Modular Welding Tables, BuildPro 4-Face Malleable Cast Iron Clamping Squares feature total of 26 mounting holes over 3 surfaces for unlimited fixturing options. Mounting holes can be used to stop, locate, clamp, or square up stock at 90°. Available in left and right facing models, squares have slim, space-saving profile and extra long mounting slot that allows for adjustable mounting and can accommodate 2 mounting bolts for greater stability. Read More

welding equipment & supplies

Five-Face Welding Table is designed for heavy-duty fixturing.

November 26, 2012

Siegmund Welding Table features 1-piece, 5-face design with 1 in. thick reinforced steel plate for rigid, flat work surface with load capacity of 3.5 tons and flatness within ±0.012 in. Each face is covered with 1 in. dia horizontal and vertical holes in 4 in. grid pattern. Grid lines on tabletop help align and position workpiece. Unit also features plasma nitriding finish that protects against weld spatter and corrosion and minimizes wear and deformation. Read More

plant furnishings & accessories, welding equipment & supplies

Modular Welding Table provides safe, efficient work surface.

November 26, 2012

For flexible setup of dedicated, short run, or one-time-use fixtures, 24 x 36 in. FixturePoint Tabletop accommodates insertion of FixturePoint Clamps and Modular Fixturing Components via 16 mm holes in 2 x 2 in. grid pattern. FixturePoint Table, used with tabletop frame only and set on top of existing work surface, has max height of 6 ¼ in. Included leg frame allows setup of FixturePoint Table as stand-alone work surface with 34 in. max height; 4 leveling feet are included. Read More

material handling & storage

Magnetic Welders Squares support 2- or 3-axis set-ups.

June 11, 2012

With Multi-Angle Magnetic Welders Squares, users can set up steel stock at 30, 45, 60, or 90° angles. Standard Model MS350A is suited for 2-axis applications, while Model MS350 has 3-axis magnetic faceplate with 2 embedded rare earth disc magnets for 3rd axis holding of steel stock. At height of 3.86 and width of 2.95 in., fully enclosed magnet squares are suitable for setting up materials in shop or out in field to speed production. Read More

material handling & storage

Sheet Metal Magnets deliver 120 lb of magnetic force.

June 8, 2012

Equipped with Rare Earth magnetic disc base measuring over 3 in. in diameter, Sheet Metal Magnets firmly hold sheet metal or automotive metal panels in place during butt welding, tacking, painting, or repair applications. Units have screw on/off EZ Grip bright orange plastic handles for placing, moving, and removing magnets. To protect delicate work surfaces, magnetic base is covered with no-mar, replaceable rubber pad. Read More

material handling & storage

Workholding Magnet accelerates alignment during welding.

June 8, 2012

With 4 embedded rare earth disc magnets, Gusset Magnet can be used to align, locate, and hold steel gussets, base plates, and steel panels against steel substructure in assembly, tacking, and welding operations. Product applies direct, even clamping pressure while leaving space for welding access. For secure positioning of gusset or panel, 3 adjustable 1 ½ in. long magnetic hex bolts can be pre-set to correct depth, and 3 positioning pins act as guide for alignment against substructure. Read More

material handling & storage

Corner Magnet enables out-of-the-way clamping.

June 9, 2010

Designed to hold workpieces from outside, 90° Corner Magnet(TM) leaves unobstructed space inside workpiece for welding. Boomerang-shaped magnet consists of 90° Magnet Square in reverse, with 90° edges on inside walls. Outside edge provides 60° clamping surface, while corner relief provides necessary clearance for clamping around overlapping flanges, lips, or edges. Measuring 3½ in. high, product is useful for holding flange in place for tack welding to pipes or tubes. Read More

Other Company News from
Strong Hand Tools