GAO FiberOptics Inc.
Toronto CAN
Share:
1000 M Fiber Optic Network Interface Card Supports High-End Servers
Toronto, Canada - GAO Fiber Optics (www.GAOFiberOptics.com) recommends its 1000 M Fiber Optic Network Interface Card operating at 1000 Mbps. This network interface card provides up to 2000 Mbps full-duplex bandwidth capacity to support high-end servers. This 1000M fiber optic network interface card, model C0320003, features plug and play design, full-duplex mode, high level VLAN filtering...
Read More »14/16 Port Converter Integrated Rack
Toronto, Canada - GAO Fiber Optics (www.GAOFiberOptics.com) has released this 14/16 port converter integrated rack which is able to link transparently with backbone equipment such as switches or routers to LAN workgroup segments. It is intended to accommodate 14/16 slide-in modules of various type of media converter at a central location for multiple segment cross connections. This 14/16 port...
Read More »Fiber Optic Light Source provides dual wavelength output.
Designed for use with Model 5301 optical power meter, Model 5201 provides 1,310/1,550 nm wavelengths for single mode fiber and 850/1,300 nm wavelengths for multimode fiber. Handheld unit offers switchable modulation frequencies, including CW, 270 Hz, 1 kHz, and 2 kHz. Suited for optical network installation, trouble shooting, and maintenance, light source is configured with FP-LD emitter and...
Read More »Optical Variable Attenuator enables fiber link certification.
Integrating functionality of both attenuator and optical power meter in one unit, Model 5501 provides measurement range of 2.5-65 dB and attenuating wavelength from 1,260-1,650 nm at accuracy of Ã-
Read More »Fiber Converter suits both optical and electrical networks.
Designed to perform flow control and reduce broadcast packets, 10/100 Mbps adaptive fast Ethernet fiber converter, GAOMB610A implements mutual conversion between 10Base-T/100Base-TX pair electrical signals and 100Base-FX optical signals. Unit uses switching technology and storing/forwarding technology to implement data transmission between 2 types of network connection media. It supports...
Read More »CWDM Transceivers feature SFP design.
Compatible with SFP (small form-factor pluggable) modules, including those from CISCO, HCDTR series is designed to support SONET, Gigabit Ethernet, Fiber Channel, and other communication standards. Areas of use include telecommunication and data communication applications.
Read More »Adjustable Digital Light Attenuator from GAO
Toronto, Canada - GAO Fiber Optics Inc. (www.GAOFiberOptics.com) presents its adjustable digital light attenuator (GAO-9A). This fiber optics instrument is widely used for optical cable construction and maintenance, fiber optic communication, fiber optic sensor and CATV. GAO's adjustable digital light attenuator offers a four and a half-digit liquid crystal display (LCD) and an automatic...
Read More »Transceiver is designed for use with single-mode fiber.
Compliant with SONET/SDH recommendations for OC-48 specifications, 10/100/1000 BASE-T SFP optical copper transceiver operates at 1,310 nm wavelength and is suited for serial telecom and datacom applications. Available in small form factor package, unit is hot pluggable and consumes mimimal power. Transceiver's 2X10 pin metal housing offers EMI shielding.
Read More »Optical Fiber Identifier offers functional diversity.
Portable GAO08412 can test and detect optical signals, modulation signals, as well as presence/absence of signals during installation, maintenance, rerouting, and restoration of fiber optic networks. It does not require opening fiber at splice point for identification, avoiding service interruption, and can also detect relative core power of optic fiber from -30 to 5 dBm. Unit can also identify...
Read More »Optical Transceivers suit serial data communication.
Designed for Gigabit Ethernet applications, GBIC Series units provide IEEE-802.3 compliant link at data rates of 1.25 GB/sec. Housed in stainless steel package and operating from +3.3 V supply, hot-pluggable units are also compliant with ANSI specifications for fiber channel applications at 1.06 GB/sec. Receiver section incorporates 1,550 nm DFB for single-mode operation with temperature...
Read More »1000 M Fiber Optic Network Interface Card Supports High-End Servers
Toronto, Canada - GAO Fiber Optics (www.GAOFiberOptics.com) recommends its 1000 M Fiber Optic Network Interface Card operating at 1000 Mbps. This network interface card provides up to 2000 Mbps full-duplex bandwidth capacity to support high-end servers. This 1000M fiber optic network interface card, model C0320003, features plug and play design, full-duplex mode, high level VLAN filtering...
Read More »14/16 Port Converter Integrated Rack
Toronto, Canada - GAO Fiber Optics (www.GAOFiberOptics.com) has released this 14/16 port converter integrated rack which is able to link transparently with backbone equipment such as switches or routers to LAN workgroup segments. It is intended to accommodate 14/16 slide-in modules of various type of media converter at a central location for multiple segment cross connections. This 14/16 port...
Read More »Fiber Optic Light Source provides dual wavelength output.
Designed for use with Model 5301 optical power meter, Model 5201 provides 1,310/1,550 nm wavelengths for single mode fiber and 850/1,300 nm wavelengths for multimode fiber. Handheld unit offers switchable modulation frequencies, including CW, 270 Hz, 1 kHz, and 2 kHz. Suited for optical network installation, trouble shooting, and maintenance, light source is configured with FP-LD emitter and...
Read More »Optical Variable Attenuator enables fiber link certification.
Integrating functionality of both attenuator and optical power meter in one unit, Model 5501 provides measurement range of 2.5-65 dB and attenuating wavelength from 1,260-1,650 nm at accuracy of Ã-
Read More »Fiber Converter suits both optical and electrical networks.
Designed to perform flow control and reduce broadcast packets, 10/100 Mbps adaptive fast Ethernet fiber converter, GAOMB610A implements mutual conversion between 10Base-T/100Base-TX pair electrical signals and 100Base-FX optical signals. Unit uses switching technology and storing/forwarding technology to implement data transmission between 2 types of network connection media. It supports...
Read More »CWDM Transceivers feature SFP design.
Compatible with SFP (small form-factor pluggable) modules, including those from CISCO, HCDTR series is designed to support SONET, Gigabit Ethernet, Fiber Channel, and other communication standards. Areas of use include telecommunication and data communication applications.
Read More »Adjustable Digital Light Attenuator from GAO
Toronto, Canada - GAO Fiber Optics Inc. (www.GAOFiberOptics.com) presents its adjustable digital light attenuator (GAO-9A). This fiber optics instrument is widely used for optical cable construction and maintenance, fiber optic communication, fiber optic sensor and CATV. GAO's adjustable digital light attenuator offers a four and a half-digit liquid crystal display (LCD) and an automatic...
Read More »Transceiver is designed for use with single-mode fiber.
Compliant with SONET/SDH recommendations for OC-48 specifications, 10/100/1000 BASE-T SFP optical copper transceiver operates at 1,310 nm wavelength and is suited for serial telecom and datacom applications. Available in small form factor package, unit is hot pluggable and consumes mimimal power. Transceiver's 2X10 pin metal housing offers EMI shielding.
Read More »Optical Fiber Identifier offers functional diversity.
Portable GAO08412 can test and detect optical signals, modulation signals, as well as presence/absence of signals during installation, maintenance, rerouting, and restoration of fiber optic networks. It does not require opening fiber at splice point for identification, avoiding service interruption, and can also detect relative core power of optic fiber from -30 to 5 dBm. Unit can also identify...
Read More »Optical Transceivers suit serial data communication.
Designed for Gigabit Ethernet applications, GBIC Series units provide IEEE-802.3 compliant link at data rates of 1.25 GB/sec. Housed in stainless steel package and operating from +3.3 V supply, hot-pluggable units are also compliant with ANSI specifications for fiber channel applications at 1.06 GB/sec. Receiver section incorporates 1,550 nm DFB for single-mode operation with temperature...
Read More »