Company News

Davis-Standard LLC

1 Extrusion Dr., Pawcatuck, CT, 06379, USA

  • 860-599-1010

Latest New Product News from
Davis-Standard LLC

Machinery & Machining Tools, Material Handling & Storage

Liquid Coating Systems offer high application rates.

October 13, 2016

Capable of applying single layer coatings at rates up to 2,800 fpm, Curtain Slide Coater offers expansion capabilities up to 2 additional layers. Five-Roll Silicone Coater can apply 100% silicone at rates up to 2,400 fpm. System is constructed of stainless steel for ease of cleanup and includes mist removal system. More than 50 liquid coating methods are available, supporting applications in... Read More

Materials & Material Processing

Blown Film Extrusion System supports equipment flexibility.

July 29, 2015

Offered with multiple extruder packages, dsX flex-film™Â comes in 1,900, 2,200, and 2,500 mm sizes and is equipped with extruders, feedscrews, gearboxes, air rings, and dies. Latter are manufactured for applications from 1–9 layers, and options for modifying equipment are based on application and processing factors. Targeting blown film applications, system supports processing... Read More

Machinery & Machining Tools

Servo-Controlled Winder targets mid-speed, mid-width markets.

April 28, 2011

Designed for coated paper, film, and non-woven products, SurfaStart 1000 can slit and wind rolls of material up to 120 in. wide into shippable rolls up to 60 in. in diameter at speeds up to 1,000 fpm. System incorporates stationary knife transfer system, bump-less primary-to-secondary winding transitioning system, and programmable tension and nip control. Slitter mandrel, spreader roll, core... Read More

Machinery & Machining Tools

Multilayer Die maximizes barrier film production versatility.

December 7, 2010

Designed to produce blown film structures from 5-9 layers, ProCone multilayer die has stackable mandrel arrangement that allows vertical movement of mandrels within die stack. Design also allows for angular movement of mandrels relative to each other, and interchangeable modules allow switching for higher/lower rates or special resins as required. Manufactured in sizes from 2-12 in., die is... Read More

Machinery & Machining Tools

Blown Film Surface Winder handles up to 60 in. dia rolls.

July 16, 2010

Available in widths from 44-134 in., AC-driven SLC (SLiding Carriage) Series employs pneumatic cylinders for controlling winding force and is capable of winding rolls on 3 or 6 in. cores. Finished roll unloading system is independent from winding transfer cycle sequence, while roll carts and shaft handling are available to add automation. Other features include horizontal flat bed design, touch... Read More

Material Handling & Storage, Materials & Material Processing

Extruder Feedsection adjusts automatically.

October 29, 2009

Available for retrofit to existing 3½ in. Davis-Standard extruders, Hinge-Roll Feedsection offers uniform, consistent feed rate and adjusts automatically based on feed strip size. Feedroll and interior of feedsection are accessible by unfastening 2 swing bolts and lowering attached swing-down cartridge by means of electro-mechanical cylinder. Belt drive eliminates lubrication requirements and... Read More

Controls & Controllers

Control System targets blow molding applications.

March 25, 2009

Available for retrofit to existing systems, MACO 6500RSE supports Wonderware 8.0 and Windows® XP Professional, which communicate with PLC over 2 separate servers. System offers set point change log to track changes made by operators, SPC program to continuously track 34 items each cycle, and recipe save function to verify names and eliminate potential for lost recipes. Closed loop synchronous... Read More

Machinery & Machining Tools

Surface Winder handles rolls up to 140 in. wide.

March 24, 2009

Capable of winding film in widths from 80-140 in. with single or dual winder configuration, PAC 60 uses center shaft support for 3 in. cores to wind multiple slit rolls to 30 in. OD, while 40 in. rolls are wound on 6 in. shafts. It comes with motorized roll cart and shaft puller fully integrated into PLC-based controller, which reduces operator lifting of shafts and promotes winding automation.... Read More

Materials & Material Processing, Textile Industry Products

Converting Machinery incorporates pelletizing technology.

March 24, 2009

Black Clawson machinery is available with multiple pelletizing features, such as air ring pelletizing system that enables cutting of materials that should not come into contact with water quench media or those with low heat removal requirement. Also, debottlenecking retrofits are available to increase production capacity utilizing X model version. Pelletizer die plate design promotes throughput... Read More

Controls & Controllers

Control Systems target extrusion machines.

March 23, 2009

Featuring coordinated one-line drive control, DS-eTPC delivers temperature control of up to 8 barrel heating/cooling zones per extruder. With Historian option, touch-panel controller can be connected to any PC running Internet Explorer® so that temperature profiles, drive conditions, and pressure conditions can be saved in report format for future analysis. REACT System enables conditions at... Read More

Laboratory and Research Supplies and Equipment, Materials & Material Processing

Roll Stand System offers multiple extrusion capabilities.

March 23, 2009

At 40 in. wide, XP Express® is offered with technology for producing sheet with hundreds of layers. It can be equipped with coextrusion die, feedblock, and layer multiplier as well as special adaptor piece for injecting atmospheric gas for foam applications. XP Express PS (packaging sheet) and CS (custom sheet) models are available for in-line thermoforming of PP, APET, and PS and may also be... Read More

Machinery & Machining Tools

Surface Winders can roll materials in diameters up to 60 in.

February 8, 2008

PAC 50 winders feature compact hydraulic system that uses high-speed digital electronics for lay-on pressure control, which reduces blocking at core. They also feature device to bring new core up to speed prior to transfer as well as integrated, motorized shaft hoist system. Touchscreen controls are mounted on pendant and systems include ac digital drives and center assist drives. Shafts are... Read More

Material Handling & Storage

Barrel Lining Material resists abrasion and corrosion.

September 26, 2007

Consisting of nickel-based alloy with tungsten carbide particles suspended within its matrix, wear-resistant DS8000 is recommended for processes requiring highly filled or reinforced compounds, high-temperature resins, silicones, vinyl resins, polyethylenes, LLDPE, HMWPE, and blends. Read More

Machinery & Machining Tools, Mounting & Attaching Products

Gusseting Unit handles industrial and agricultural film.

June 26, 2007

Designed to accommodate blown film bubbles up to 60 ft in circumference, gusseting unit is engineered with modular design consisting of 7 sections. Upper nip mounted arm swings under nip unit, which is used for motorized adjustment of gusset's top position, giving users processing range from full depth gusseting to complete retraction without additional plant space. Tetrahedral-shaped gusset is... Read More

Controls & Controllers

Blow-Molding Control connects to PC.

June 4, 2004

MACO 6500RS offers Windows® 2000 Pro Ethernet capabilities, 3 modes of closed-loop shoot/fill, adaptive extruder speed control, digital on-demand heater amp scan, statistical process control, and security change function. PC/PLC arrangement permits dedicated sequencing and control of criteria such as temperature, extruder speed, and shot size while providing operator's station for data entry... Read More

Materials & Material Processing

Reclaim Extruder targets foam reprocessing applications.

April 5, 2004

Foam Series, dual-diameter Scrapper® features wide, grooved feed section for reprocessing low bulk density material. Single flight screw in feed area is provided to grip lightweight PS, PE, and PP foam scrap. Barrel heating and air-cooling zones feature cast aluminum finned heaters and high-capacity blowers. Steel, fixed weldment base supports gear reducer, feed section, and motor. Available... Read More

Materials & Material Processing, Portable Tools, Textile Industry Products

Three-Roll Stack handles various processes.

February 20, 2004

Horizontal 3-roll stack allows for casting, laminating, and sheet processes due to its ability to integrate different payoffs and winders. Machine is available in sizes from 12-30 in. wide, with single- and twin-screw extruders, in single- and multi-layer configurations. Each roll is independently servo driven, with precise roll dimensions and roll gaps available. Unit is suited for use by... Read More

Optics & Photonics

Winders suit film and sheet applications.

August 8, 2003

Suited for winding rolls up to 29 in. wide for narrow web production, Killion KXE winders are offered in single, dual, and multi-shaft versions with fixed or turret configurations. Options include cone or air shaft core location and collapsible mandrels. Supplied with cantilevered shaft, products operate as self-contained, compact units and may be used on any width line for line speeds up to 100... Read More

Materials & Material Processing

Extrusion Coating Machine suits short production runs.

June 5, 2003

Flex-Master 1300 extrusion coating machine handles runs of 1-2 hr for flexible packaging structures, including LDPE, LLDPE, m-LLDPE, Surlyn, and EVA. Coating speed is up to 300 m/min for 1000 mm dia finished rolls. The 65 and 75 mm co-extrusion stations use feed-block and 1500 mm die with internal deckles. Three-roll laminator has linear-nip arrangement, 450 to 760 mm chill roll, 200 mm... Read More

Materials & Material Processing

Extruders are suitable for custom profiling.

June 4, 2003

Super Blue(TM) extruder comes in 2, 2½, 3, and 3½ in. sizes, each with 24:1 UD ratio. Extruder has low noise, high torque double-reduction gearbox, cast aluminum finned heaters, brushless AC drive and motor, and air cooling system. Machine has structural steel construction, and wear-resistant bimetallic barrel designed for 10,000 psi. Applications include tubing, basic wire, cable, and film. Read More

Other Company News from
Davis-Standard LLC