Company News

Video Mount Products

345 Log Canoe Circle, Stevensville, MD, 21666, US

Share Like Tweet Add Email

Latest New Product News from
Video Mount Products

Electronic Components & Devices, Plant Furnishings & Accessories

Equipment Rack Enclosure offers 1,300 lb load capacity.

August 21, 2015

Featuring 42 rack spaces and usable depth of 33 in., EREN-42E1K 19 in. Equipment Rack Enclosure is designed for use with audio, video, security, and communication components. Portable, fully welded unit comes complete with integrated cooling fans and lockable, removable side panels. Other features include tempered glass front door, double swing rear steel door, adjustable front and rear rails, vented top and bottom, cable routing knockouts, casters, and leveling feet. Read More

Mounting & Attaching Products

Ceiling Mount Adapter handles up to 80 in. flat panel displays.

April 9, 2015

Featuring black powder coat finish, weighing 23.6 lb, and offering adjustable 0° to 15° tilt, PDS-LCM2B allows VMP PDS-LCB large flat panel tilt ceiling mount to accommodate two 37–80 in. flat panel displays, back-to-back, with combined weight of up to 360 lb. This dual large flat panel ceiling mount adapter, measuring 12.1 x 34.8 x 22 in. (variable width), accommodates hole patterns from 200 x 200 mm to 860 x 500 mm. Areas of use include restaurants, bars, health clubs, and arenas. Read More

Mounting & Attaching Products, Safety & Security Equipment, Optics & Photonics

Roof Mounts feature non-penetrating design.

March 20, 2015

Using 8 x 8 x 16 in. cinderblocks as ballast to avoid damaging roof surface, FRM Series is suited for wireless security surveillance systems, as well as DBS, off-air antenna, satellite internet systems, and point-to-point CCTV signal transmission. FRM-125 features 60 in. mast with 1.25 in. OD, while FRM-166 has 30 in. mast with 1.66 in. OD. In addition, FRM-200 provides 30 in. mast with 2 in. OD. FRM-MAT Protective Rubber Mat is available as accessory for all FRM mounts. Read More

Mounting & Attaching Products

Articulating Wall Mount holds 27-42 in. flat panel displays.

March 12, 2015

With closed depth of 1.6 in. and fully opened extension of 16.4 in. Model FP-MLPAB supports most 27–42 in. flat panel displays up to 55 lb. Unit offers fully adjustable 10° tilt, 3° list adjustment, and ±45° of rotation. Designed to install into single stud, mount has maximum flat panel hole pattern of 400 x 400 mm. Other features include black powder coat finish, integrated cable management system and level, and mounting rails that accept padlocks for security. Read More

Fluid & Gas Flow Equipment, Mounting & Attaching Products, Computer Hardware & Peripherals, Fasteners & Hardware

Truss Ceiling Adapter offers 180 lb load capacity.

March 5, 2015

Designed to attach ceiling mounts to variety of trussing or pipe, Model TCA-1 is capable of adapting up to max diameter of 3 in. or max cross section dimensions of 3 x 3 in. Adapter has black powder coat finish and includes cable pass throughs for cable management. Measuring 5.5 x 5.5 x 7.6 in., adapter is suited for public view monitors or PTZ cameras in retail, commercial, or industrial settings where truss ceilings are used. Read More

Mounting & Attaching Products

Ceiling Mount Adapter accepts up to 80 in. flat panels.

January 16, 2015

With PDS-LCM2B Adapter, PDS-LCB tilt ceiling mount can accommodate two 37–80 in. flat panel displays back-to-back with combined weight up to 360 lb. Adapter offers 0–15° tilt and supports hole patterns ranging from 200 x 200 mm up to 860 x 500 mm. Designed with black powder coat finish, adapter offers multi-function option for host of applications, including restaurants, bars, health clubs, and arenas. Read More

Mounting & Attaching Products

Articulating Wall Mount holds flat panel displays up to 55 lb.

December 17, 2014

Intended for 27–42 in. flat panel displays, Model FP-MLPAB provides closed depth of 1.6 in., fully opened extension of 16.4 in. as well as fully adjustable 10° tilt, 3° list adjustment, and ±45° of rotation. Unit is designed for installation to single stud and has maximum flat panel hole pattern of 400 x 400 mm. In addition to black powder coat finish, mount includes integrated cable management system, level, and mounting rails that accept padlocks for security. Read More

Material Handling & Storage, Plant Furnishings & Accessories, Electronic Components & Devices

Equipment Rack Enclosures feature 1,000 lb load capacity.

October 28, 2014

Featuring welded steel construction and black powder coat finish, Models EREN-18, EREN-27, and EREN-42E offer 18, 27, and 42 rack spaces, respectively. Portable units come with integrated cooling fans and lockable, removable side panels, allowing for organization of multiple electronic components while protecting against thermal issues, damage, and theft. Working with 19 in. rack equipment, enclosures have tempered glass front door, double swing steel rear door, and vented top and bottom. Read More

Computer Hardware & Peripherals, Mounting & Attaching Products

Articulating Wall Mount offers tilt and list adjustment.

October 16, 2014

Offering low-profile alternative for mounting flat panel displays from 32–52 in., Model FP-XMLPAB features closed depth of 1.5 in. and fully opened extension of 16.2 in., along with 15° tilt adjustment, 3° list adjustment, and ±45° of rotation. Mounting rails accept padlocks for added safety and security. Supplied in black powder coat finish, mount additionally features integrated cable management system, integrated level, and 600 x 400 mm max flat panel hole pattern. Read More

Plant Furnishings & Accessories, Electronic Components & Devices

Portable Enclosures house and protect 19. rack equipment.

October 7, 2014

EREN-18, EREN-27, and EREN-42E feature fully welded steel construction with black powder coat finish and respectively offer 18, 27, and 42 rack spaces. Each unit allows for organization of multiple electronic components while also protecting them from thermal issues as well as damage or theft. Along with integrated cooling fans and lockable, removable side panels, features include 1,000 lb load capacity, casters and leveling feet, and rails with standard 10-32 threading.
Read More

Computer Hardware & Peripherals

Large Flat Panel Wall Mount offers tilt, articulation capacity.

June 18, 2014

Designed for on-wall applications, including digital signage, FP-LWAB accommodates 42–70 in. flat panels that weigh up to 150 lb and have max hole pattern of 800 x 500 mm. Large flat panel wall mount rotates up to 45°, has adjustable tilt of 0° to +15°, and comes with mounting rails that accept padlocks for security. Supplied with black powder coat finish, this UL-listed product also features clip-based cable management system that increases aesthetics and facilitates installation. Read More

Electronic Components & Devices

Rack Enclosures benefit from Building Information Modeling.

June 6, 2014

Supplied with integrated cooling fans and removable side panels (with optional locks), portable and fully welded EREN free-standing 19 in. equipment rack enclosures allow for organization of multiple electronic components while protecting them from thermal issues, damage, and theft. ERWEN wall-mounted rack enclosures, suited for security and AV installation applications, feature adjustable front and rear rails, removable hinged wall plate, and reversible glass front door. Read More

Computer Hardware & Peripherals, Mounting & Attaching Products

Low Profile Articulating Wall Mount optimizes monitor viewing.

May 8, 2014

Able to hold 32–52 in. flat panels weighing up to 100 lb, FP-XMLPAB extra medium low profile articulating wall mount has black powder coat finish, integrated cable management system and level, and 600 x 400 mm max flat panel hole pattern. Closed depth of 1.5 in. and fully opened extension of 16.2 in., along with adjustable 15° tilt, 3° list adjustment, and ±45° of rotation, facilitate positioning of flat panel for optimal viewing angle in any room or office. Read More

Computer Hardware & Peripherals, Display & Presentation Equipment, Mounting & Attaching Products

Flat Panel Display Wall Mount offers tilt, rotation adjustment.

April 22, 2014

With 1.5 in. closed depth and 16.2 in. fully opened extension, FP-XMLPAB extra medium, low profile, articulating wall mount accommodates 32–52 in. flat panel displays up to 100 lb. Features such as 15° tilt, 3° list adjustment, and ±45° of rotation enable manipulation of flat panel into optimal viewing angle, while mounting rails accept padlocks for added safety and security. Along with 600 x 400 mm max flat panel hole pattern, mount features integrated cable management system and level. Read More

Plant Furnishings & Accessories, Electronic Components & Devices

Equipment Rack Enclosures offer 1,000 lb load capacity.

April 15, 2014

Featuring welded steel construction with black powder coat finish, EREN Series is designed for installations where protected components are a necessity. Portable 19 in. units include integrated cooling fans and lockable, removable side panels that allow for organization of multiple electronic components. Available with 18, 27, or 42 rack spaces, enclosures have 10-32 threaded rails, tempered glass front door, double swing steel rear door, vented top and bottom, casters, and leveling feet. Read More

Computer Hardware & Peripherals, Mounting & Attaching Products

Articulating Wall Mount holds flat panels up to 150 lb.

March 31, 2014

Designed for 42–70 in. flat panels with max hole pattern of 800 x 500 mm, FP-LWAB Tilt Mount rotates up to 45° and has adjustable tilt of 0 to +15°. Unit comes with mounting rails that accept padlocks for security and clip-based cable management system that facilitates installation. Supplied with black powder coat finish, UL-listed mount is suited for numerous on-wall applications, including digital signage. Read More

Mounting & Attaching Products

Low Profile Articulating Wall Mount secures flat panel displays.

February 19, 2014

Used for mounting up to 100 lb, 32–52 in. flat panel displays, FP-XMLPAB comes in black powder coat finish and offers fully adjustable 15° tilt, 3° list, and ±45° rotation capabilities for optimal viewing angle in any room or office. Design has closed depth of 1.5 in. and fully opened extension of 16.2 in. For safety and security, mounting rails accept padlocks. Other features include integrated cable management system, integrated level, and 600 x 400 mm max flat panel hole pattern. Read More

Plant Furnishings & Accessories

Equipment Rack Enclosures offer 1,000 lb load capacity.

February 11, 2014

Supplied complete with integrated cooling fans and lockable, removable side panels, 19 in. EREN Series allows for organization of multiple electronic components while protecting them from thermal issues as well as damage or theft. Enclosures feature fully welded steel construction, black powder coat finish, tempered glass front door, double swing steel rear door, and adjustable front and rear rails. EREN-18, EREN-27, and EREN-42E models provide 18, 27, and 42 rack spaces, respectively. Read More

Mounting & Attaching Products

Flat Panel Wall Mount features articulating capabilities.

January 17, 2014

Capable of holding most 42–70 in. flat panels with max hole pattern of 800 x 500 mm, Model FP-LWAB rotates up to 45° and has adjustable tilt of 0° to +15°. Mounting rails accept padlocks for increased security, while clip-based cable management system facilitates installation. Supplied in black powder coat finish, UL-listed mount is specifically designed for on-wall applications, including digital signage. Read More

Material Handling & Storage, Plant Furnishings & Accessories, Electronic Components & Devices

Wall Mounted 19 in. 12RU Rack Enclosure conserves floor space.

December 17, 2013

Compatible with all standard 19 in. rack equipment and accessories, 61.6 lb ERWEN-12E measures 24.3 x 21.9 x 25.3 in., offers 12 rack spaces, and has 120 lb load capacity. Elements of construction include adjustable 4 post rails, removable hinged wall plate, and reversible hinged tempered glass front door. Rails have 10-32 threading, and welded steel construction features black powder coat finish. Cable routing knockouts are standard on top and bottom, which are vented.
Read More

Other Company News from
Video Mount Products