Stackpole Electronics, Inc.
Suite 207
Raleigh, NC 27612
Foil on Ceramic Resistor offers resistance down to 3 milliohm.
Foil on ceramic resistor, CSRF0402, offers 3 mΩ resistance value in tolerances as tight as Ã-
Read More »
Metal Oxide Resistors offer optimized working voltages.
Suitable for high-power and high-voltage applications, 3 W Models RSF3 and RSMF3 feature working voltages of 800 V and 600 V, respectively, while 5 W Models RSF5 and RSMF5 offer working voltage of 1,000 V. Typical applications include power supplies, electric motor and pump controls, spa controls, and climate controls as well as LED lighting, portable electric tools, medical equipment, and COTS...
Read More »
Wirewound Resistors offer range of customizable options.
Featuring ceramic core molded into aluminum housing for optimal heat transfer, KAL Series is available in 10–250 W sizes with tolerances as low as 0.1% and resistances from 0.05 Ω to 150 KΩ. Resistors can be tailored to requirements, withÃ- low-inductance, non-inductively wound, high-surge, high-voltage, and fusibility options in addition to different types of terminations: tabs, flying...
Read More »
Surface Mount Resistor offers up to 12.5 W continuous power.
Featuring anodized aluminum housing, Model HPC12 can handle 5 W continuous power with no additional heat sink or air movement required.Ã- With 400 lfm of air movement, resistor can handle up to 12.5 W. Measuring 0.5 x 0.5 x 0.4 in., device is suited for wide range of power supplies and electric motor controls, as well as robotics, medical devices, test equipment, welding equipment, plasma...
Read More »
Chip Resistor Array comes in 0201 x 2 case size.
Featuring convex termination, Model RAVF052D is available in resistance values from 3 W to 1 MW with standard tolerances of 2% and 5%. Size of device is equivalent of two 0201 size discrete resistors. Using chip array with 2 isolated elements increases size of component such that it can be placed at same speed as 0402, which is critical for high volume applications.
Read More »
Fusible Resistors target smoke detector applications.
For applications that do not have to withstand high voltage short duration pulses, FRN Series fusible axial leaded, metal film resistors provide fusing time of less than 30 sec under power magnification levels from 12-25 times rated power, depending on resistance value. Typical fusing times are normally 10 sec. Able to withstand several hundred surges of several thousand volts, fusible wirewound...
Read More »
Sulfur-Resistant Resistor Chip is optimized for stability.
Offered as alternative to thick film resistive technology, 100% Pb-free RNCP Series thin film chip resistors are impervious to sulfur as well as resistant to shock, vibration, and temperature extremes. Chip sizes of 0402, 0603, 0805, and 1206 are available, power ratings range from 0.1-0.5 W, and working voltages vary from 50-200 V. Featuring absolute tolerances to Ã-
Read More »
Current Sense Resistor uses 20 ppm resistance material.
With bare metal element design, BR Series radial leaded thru-hole current sense resistor allows for cooling via airflow, forcing less heat into PCB. It is inherently flameproof, has low typical inductance of 1 nH or less, and exhibits resistance shifts of less than 0.5% and 0.25% for short time overloads. Capable of operating at up to 275Ã-ºC, RoHS compliant, lead free resistor is available...
Read More »
High Power Wirewounds provide precision to 0.1% tolerances.
Offering high power ratings in traditional body sizes, WWS Series allows engineers to downsize designs without sacrificing power handling capability. Series is also capable of non-inductively wound designs, and can be customized to withstand high pulse power, high pulse voltage, and can be made fusible. Product is available in bulk or standard tape and reel packaging, with minimum quantities of...
Read More »
Wirewound Resistors feature vertical-mount, bracketed design.
Available in sizes from 5-25 W, BVM Series ceramic-housed wirewound resistors offer standard tolerances of 1 and 5%, with TCR of Ã-
Read More »
Foil on Ceramic Resistor offers resistance down to 3 milliohm.
Foil on ceramic resistor, CSRF0402, offers 3 mΩ resistance value in tolerances as tight as Ã-
Read More »
Metal Oxide Resistors offer optimized working voltages.
Suitable for high-power and high-voltage applications, 3 W Models RSF3 and RSMF3 feature working voltages of 800 V and 600 V, respectively, while 5 W Models RSF5 and RSMF5 offer working voltage of 1,000 V. Typical applications include power supplies, electric motor and pump controls, spa controls, and climate controls as well as LED lighting, portable electric tools, medical equipment, and COTS...
Read More »
Wirewound Resistors offer range of customizable options.
Featuring ceramic core molded into aluminum housing for optimal heat transfer, KAL Series is available in 10–250 W sizes with tolerances as low as 0.1% and resistances from 0.05 Ω to 150 KΩ. Resistors can be tailored to requirements, withÃ- low-inductance, non-inductively wound, high-surge, high-voltage, and fusibility options in addition to different types of terminations: tabs, flying...
Read More »
Surface Mount Resistor offers up to 12.5 W continuous power.
Featuring anodized aluminum housing, Model HPC12 can handle 5 W continuous power with no additional heat sink or air movement required.Ã- With 400 lfm of air movement, resistor can handle up to 12.5 W. Measuring 0.5 x 0.5 x 0.4 in., device is suited for wide range of power supplies and electric motor controls, as well as robotics, medical devices, test equipment, welding equipment, plasma...
Read More »
Chip Resistor Array comes in 0201 x 2 case size.
Featuring convex termination, Model RAVF052D is available in resistance values from 3 W to 1 MW with standard tolerances of 2% and 5%. Size of device is equivalent of two 0201 size discrete resistors. Using chip array with 2 isolated elements increases size of component such that it can be placed at same speed as 0402, which is critical for high volume applications.
Read More »
Fusible Resistors target smoke detector applications.
For applications that do not have to withstand high voltage short duration pulses, FRN Series fusible axial leaded, metal film resistors provide fusing time of less than 30 sec under power magnification levels from 12-25 times rated power, depending on resistance value. Typical fusing times are normally 10 sec. Able to withstand several hundred surges of several thousand volts, fusible wirewound...
Read More »
Sulfur-Resistant Resistor Chip is optimized for stability.
Offered as alternative to thick film resistive technology, 100% Pb-free RNCP Series thin film chip resistors are impervious to sulfur as well as resistant to shock, vibration, and temperature extremes. Chip sizes of 0402, 0603, 0805, and 1206 are available, power ratings range from 0.1-0.5 W, and working voltages vary from 50-200 V. Featuring absolute tolerances to Ã-
Read More »
Current Sense Resistor uses 20 ppm resistance material.
With bare metal element design, BR Series radial leaded thru-hole current sense resistor allows for cooling via airflow, forcing less heat into PCB. It is inherently flameproof, has low typical inductance of 1 nH or less, and exhibits resistance shifts of less than 0.5% and 0.25% for short time overloads. Capable of operating at up to 275Ã-ºC, RoHS compliant, lead free resistor is available...
Read More »
High Power Wirewounds provide precision to 0.1% tolerances.
Offering high power ratings in traditional body sizes, WWS Series allows engineers to downsize designs without sacrificing power handling capability. Series is also capable of non-inductively wound designs, and can be customized to withstand high pulse power, high pulse voltage, and can be made fusible. Product is available in bulk or standard tape and reel packaging, with minimum quantities of...
Read More »
Wirewound Resistors feature vertical-mount, bracketed design.
Available in sizes from 5-25 W, BVM Series ceramic-housed wirewound resistors offer standard tolerances of 1 and 5%, with TCR of Ã-
Read More »