Pickering Interfaces
Wobum, MA 01801
Share:
Pickering Interfaces to Showcase Latest Switching Modules at DesignCon 2015 in Santa Clara, CA
Clacton –Ã- Pickering Interfaces, a leading provider of signal switching and instrumentation solutions used in electronic test and simulation, will be showcasing their broad catalog of PXI and Ethernet LXI switching solutions at DesignCon, booth 529, on January 28–29 in Santa Clara, CA. These products include Pickering’s PXI Fault Insertion, Programmable Resistors, RF Matrices,...
Read More »
PXI Solid-State Switches serve high-power applications.
While PXI 25 A Solid State SPST Switch (40-184) offers 3- or 6-off SPST solid-state switches capable of handling 25 A signals at up to 100 V, PXI 1.5 A Solid State SPST Switch (40-185) offers 3- or 6-off SPST solid-state switches capable of handling 1.5 A signals at up to 400 V. Solid-state switch designs are based on isolated MOSFET technology, and all models are capable of switching AC or DC...
Read More »
PXI Battery Simulator provides programmable output resistance.
Providing adjustable power supply with voltages up to 6 V and output currents up to 2.8 A, single-channel Model 41-742 has programmable output resistance function for replicating effect of batteries with finite output resistance. Unit features remote sense connections and fast correction loop that allows it to emulate battery, even at end of cable runs required to connect to device under test....
Read More »
PXI Chassis has intelligent cooling and noise management.
Respectively featuring 8 and 19 slots, 40-922 and 40-923 both offer support for 3-slot embedded controller or PCI to PXI interface. Design optimizes cooling capacity while minimizing acoustic noise through use of temperature-controlled, variable-speed fans. Intelligent chassis management system monitors power supply voltages, internal operating temperatures, and fan speed status via RS232...
Read More »
PXI Digital I/O Module features programmable threshold.
Model 40-412 provides 32 channels of digital output lines that can serve as high/low side drivers. Each channel can source 0.4 A or sink 0.5 A at voltages up to 50 V and has protection circuits that prevent over-voltage, over-current, and thermal overload conditions. There are also 32 channels of independent digital inputs with dual variable logic threshold that permits users to detect when input...
Read More »RF Modules provide switching to 3 GHz.
Available in partial build configurations, Model 40-870 provides up to 6 Off SPDT switches in single width 3U PXI module, while Model 40-872 provides up to 4 Off 4-way MUXs in single-slot 3U PXI module, and Model 40-874 offers one or two 8-way MUXs in single-slot 3U PXI module. Featuring single or dual 22 x 2 matrix with loop thru connections, Model 40-877 permits larger matrices to be...
Read More »Fault Simulation Modules handle low density applications.
Family of 40-19X modules integrate switching required for hardware-in-the-loop fault simulation into compact PXI modules. Model 40-190 for automotive applications permits 64 controller connections to be connected to up to 8 different fault conditions. Model 40-195 supports 22 channels of 2 wire connections and permits channels to be opened, shorted together, or connected to user supplied fault,...
Read More »
Matrix Switches are LXI-compliant.
Model 60-310 High Voltage Matrix is capable of hot switching 500 Vdc signals and cold switching 1,000 Vdc signals. Using Ruthenium sputtered relays providing less than 2.5 mV thermal EMF, model 60-510 Low Thermal EMF Matrix is capable of switching 150 Vdc signals with carry current up to 1 A. Contained within 2U enclosure, both include IVI, SOAP, and Direct I/O drivers and soft front panels for...
Read More »
Remote AC Power Management Switch is LXI-compliant.
Supplied in 1U high case, 60-200 provides means of applying ac power to any instrument or ac-powered device. Single ac supply connection is connected to 8 switched ac outlets, which provide power to the connected instruments. Each connection can be turned on or off, including precise timing delays under programmatic control over Ethernet LXI compliant connection or controlled through any W3C...
Read More »Microwave Matrix Switches are LXI compliant.
With LXI compliant interface that provides simple method of controlling matrix through web browser or programmatic interface, 60-750 and 60-751 LXI Microwave Matrices occupy 2U of rack space. Model 60-750 is available as single or dual 4 x 4 matrix or as 8 x 4 matrix to 10 GHz, while 60-751 20 GHz version is offered as single 4 x 4 matrix. Auxiliary output allows products to control and supply...
Read More »
Pickering Interfaces to Showcase Latest Switching Modules at DesignCon 2015 in Santa Clara, CA
Clacton –Ã- Pickering Interfaces, a leading provider of signal switching and instrumentation solutions used in electronic test and simulation, will be showcasing their broad catalog of PXI and Ethernet LXI switching solutions at DesignCon, booth 529, on January 28–29 in Santa Clara, CA. These products include Pickering’s PXI Fault Insertion, Programmable Resistors, RF Matrices,...
Read More »
PXI Solid-State Switches serve high-power applications.
While PXI 25 A Solid State SPST Switch (40-184) offers 3- or 6-off SPST solid-state switches capable of handling 25 A signals at up to 100 V, PXI 1.5 A Solid State SPST Switch (40-185) offers 3- or 6-off SPST solid-state switches capable of handling 1.5 A signals at up to 400 V. Solid-state switch designs are based on isolated MOSFET technology, and all models are capable of switching AC or DC...
Read More »
PXI Battery Simulator provides programmable output resistance.
Providing adjustable power supply with voltages up to 6 V and output currents up to 2.8 A, single-channel Model 41-742 has programmable output resistance function for replicating effect of batteries with finite output resistance. Unit features remote sense connections and fast correction loop that allows it to emulate battery, even at end of cable runs required to connect to device under test....
Read More »
PXI Chassis has intelligent cooling and noise management.
Respectively featuring 8 and 19 slots, 40-922 and 40-923 both offer support for 3-slot embedded controller or PCI to PXI interface. Design optimizes cooling capacity while minimizing acoustic noise through use of temperature-controlled, variable-speed fans. Intelligent chassis management system monitors power supply voltages, internal operating temperatures, and fan speed status via RS232...
Read More »
PXI Digital I/O Module features programmable threshold.
Model 40-412 provides 32 channels of digital output lines that can serve as high/low side drivers. Each channel can source 0.4 A or sink 0.5 A at voltages up to 50 V and has protection circuits that prevent over-voltage, over-current, and thermal overload conditions. There are also 32 channels of independent digital inputs with dual variable logic threshold that permits users to detect when input...
Read More »RF Modules provide switching to 3 GHz.
Available in partial build configurations, Model 40-870 provides up to 6 Off SPDT switches in single width 3U PXI module, while Model 40-872 provides up to 4 Off 4-way MUXs in single-slot 3U PXI module, and Model 40-874 offers one or two 8-way MUXs in single-slot 3U PXI module. Featuring single or dual 22 x 2 matrix with loop thru connections, Model 40-877 permits larger matrices to be...
Read More »Fault Simulation Modules handle low density applications.
Family of 40-19X modules integrate switching required for hardware-in-the-loop fault simulation into compact PXI modules. Model 40-190 for automotive applications permits 64 controller connections to be connected to up to 8 different fault conditions. Model 40-195 supports 22 channels of 2 wire connections and permits channels to be opened, shorted together, or connected to user supplied fault,...
Read More »
Matrix Switches are LXI-compliant.
Model 60-310 High Voltage Matrix is capable of hot switching 500 Vdc signals and cold switching 1,000 Vdc signals. Using Ruthenium sputtered relays providing less than 2.5 mV thermal EMF, model 60-510 Low Thermal EMF Matrix is capable of switching 150 Vdc signals with carry current up to 1 A. Contained within 2U enclosure, both include IVI, SOAP, and Direct I/O drivers and soft front panels for...
Read More »
Remote AC Power Management Switch is LXI-compliant.
Supplied in 1U high case, 60-200 provides means of applying ac power to any instrument or ac-powered device. Single ac supply connection is connected to 8 switched ac outlets, which provide power to the connected instruments. Each connection can be turned on or off, including precise timing delays under programmatic control over Ethernet LXI compliant connection or controlled through any W3C...
Read More »Pickering Interfaces Named Finalist of Prestigious 2007 EE Times ACE Award
Ultimate product in test and measurement Model 41-581 matrix is among Industry's Elite in Test & Measurement Clacton on Sea, UK, February 9th, 2007 - Pickering Interfaces, a market innovator in signal switching and conditioning for electronics test, today announced it was named a Finalist in CMP Technology's EE Times third Annual Creativity in Electronics (ACE) Awards (www.eetimes.com/ace )for...
Read More »