REGO-FIX Tool Corp.
Indianapolis, IN 46268
Share:
Collet Nut works with through-coolant tools.
Designed for larger ER 50 tools, Hi-Q/ERC 50 can replace standard ER 50 non-coolant nuts in applications where coolant through is possible. Nut will use DS/ER 50 coolant disks for tools larger than 25.5 mm, and can also utilize special adapter, allowing use of ER 40 coolant and flush type disks for smaller diameters. Adapter reduces number of disks required specifically for ER 50 applications.
Read More »
REGO-FIX-® Highlighting Precision Toolholding Solutions at PMTS 2011
Indianapolis, Indiana - REGO-FIXÃ-® will be showcasing a variety of high precision toolholding products at PMTS 2011. The company will display products in booth #1025 at the show, which takes place on April 19 - 21 at the Greater Columbus Convention Center in Columbus, Ohio. REGO-FIX's swissQuick toolholding system provides a wide range of flexible models in various types (ER 8 - ER 25) and...
Read More »
REGO-FIX-® Showcasing a Variety of Toolholding Solutions at AeroDef Manufacturing 2011
Indianapolis, Indiana - REGO-FIXÃ-® will be showcasing a variety of new toolholding products at AeroDef Manufacturing 2011, including multiple additions to its innovative powRgripÃ-® toolholding system. REGO-FIX will be displaying products in booth #1254 at the event, which will take place on April 5 - 7 at the Anaheim Convention Center in Anaheim, California. Through its unique approach...
Read More »
Toolholders are suited for high-speed cutting applications.
Balanced by design to G 2.5 at 25,000 rpm, Q+Ã-® system CAPTO toolholders are suited for high-speed and high performance cutting applications. High precision toolholders are available in powRgripÃ-® collet system and ER toolholder line. Type H toolholders are ready to accept Hi-QÃ-® balancing rings that allow precision balancing of system up to 80,000 rpm.
Read More »REGO-FIX-® Unveils New Line of Extended Reach Toolholders
Indianapolis, Indiana, March 30, 2009 - REGO - FIX has announced the introduction of a new program of toolholders that provide an extended reach of up to 18 . Available for the company's ER and powRgrip product lines, the extended reach toolholders will make their worldwide debut at WESTEC 2009. The extended reach toolholders will be offered with CAT, BT and HSK tapers in 2 increments up to a...
Read More »
REGO-FIX-® Features Revolutionary Toolholding Solutions at EASTEC
Indianapolis, Indiana, March 9, 2009 - REGO-FIXÃ-® will display an extensive lineup of Swiss quality toolholding solutions at EASTEC 2009. The company's revolutionary powRgrip PG system will be among the many innovations featured in booth 5449 from May 19 - 21 at the Eastern States Exposition Grounds in West Springfield, Massachusetts. REGO-FIX's powRgrip PG system uses a toolholder and...
Read More »
REGO-FIX to Showcase powRgrip-® PG Collet System at WESTEC
Indianapolis, Indiana, February 5, 2008 - REGO-FIX will display an innovative lineup of toolholding solutions at WESTEC 2008. Among the featured products in booth #2428 is the powRgripÃ-® PG 32 collet system, the new industry standard for toolholding. Designed to provide a greater clamping range for its customers, the powRgrip PG 32 collet system will be on display from March 31 - April 3 at...
Read More »
Short Toolholders suit variety of machining applications.
Zero-Z Toolholders are compatible with BT 30 taper and BT 30 taper with no drive dog, both of which are capable of clamping tool shanks from 0.0197-0.5118 in. Units also support BT 40 taper, which handles shanks from 0.0394-0.7874 in., and CAT 50 taper with clamping range of 0.078-1.1811 in. Zero-Z toolholders are pre-balanced to G2.5 at 22,000 rpm and come with Hi-Q external clamping nut for...
Read More »
Balancing Machine offers lightweight Swiss precision.
REGO-FIXÃ-® BMT 200 balancing machine utilizes soft bearing technology spindle design that measures vibrations caused by imbalance and also permits different calibration for each tool set-up. Weighing less than 90 lb, machine allows balancing of most toolholder taper styles and sizes. Standard balancing methods are offered, including gram, angular, drilling radial, drilling axial, milling,...
Read More »
Tool Holders do not feature drive keys.
Pre-balanced to G2.5 at 22,000 rpm, BT 30 ER 20 series Zero-Z short toolholders have clamping capacity of 0.5-13 mm. Symmetrical toolholder suits woodworking and high-speed machines requiring special taper and offer standard and ultra precision levels of protection.
Read More »
Collet Nut works with through-coolant tools.
Designed for larger ER 50 tools, Hi-Q/ERC 50 can replace standard ER 50 non-coolant nuts in applications where coolant through is possible. Nut will use DS/ER 50 coolant disks for tools larger than 25.5 mm, and can also utilize special adapter, allowing use of ER 40 coolant and flush type disks for smaller diameters. Adapter reduces number of disks required specifically for ER 50 applications.
Read More »
REGO-FIX-® Highlighting Precision Toolholding Solutions at PMTS 2011
Indianapolis, Indiana - REGO-FIXÃ-® will be showcasing a variety of high precision toolholding products at PMTS 2011. The company will display products in booth #1025 at the show, which takes place on April 19 - 21 at the Greater Columbus Convention Center in Columbus, Ohio. REGO-FIX's swissQuick toolholding system provides a wide range of flexible models in various types (ER 8 - ER 25) and...
Read More »
REGO-FIX-® Showcasing a Variety of Toolholding Solutions at AeroDef Manufacturing 2011
Indianapolis, Indiana - REGO-FIXÃ-® will be showcasing a variety of new toolholding products at AeroDef Manufacturing 2011, including multiple additions to its innovative powRgripÃ-® toolholding system. REGO-FIX will be displaying products in booth #1254 at the event, which will take place on April 5 - 7 at the Anaheim Convention Center in Anaheim, California. Through its unique approach...
Read More »REGO-FIX-® Breaks Ground on New Manufacturing Facility
Indianapolis, Indiana, December 23, 2010 - REGO-FIXÃ-® has broken ground on a new facility that will expand its manufacturing capacity and capabilities. Located at the company's headquarters in Tenniken, Switzerland, the new facility will double REGO-FIX's operations area. Despite the recent economic conditions, we have continued to experience increased demand for our precision toolholding...
Read More »REGO-FIX-® Announces Appointment of OEM Account Manager/New Product Development
Indianapolis, Indiana, November 2, 2010 - REGO-FIXÃ-® has announced the hiring of Nicholas J. Korfias as OEM Account Manager/New Product Development. This newly created position entails developing and maintaining close relationships with machine OEMs and dealers and working to identify and refine REGO-FIX's future product line expansions. Over the past several years, the industry has made a...
Read More »
Toolholders are suited for high-speed cutting applications.
Balanced by design to G 2.5 at 25,000 rpm, Q+Ã-® system CAPTO toolholders are suited for high-speed and high performance cutting applications. High precision toolholders are available in powRgripÃ-® collet system and ER toolholder line. Type H toolholders are ready to accept Hi-QÃ-® balancing rings that allow precision balancing of system up to 80,000 rpm.
Read More »REGO-FIX-® Unveils New Line of Extended Reach Toolholders
Indianapolis, Indiana, March 30, 2009 - REGO - FIX has announced the introduction of a new program of toolholders that provide an extended reach of up to 18 . Available for the company's ER and powRgrip product lines, the extended reach toolholders will make their worldwide debut at WESTEC 2009. The extended reach toolholders will be offered with CAT, BT and HSK tapers in 2 increments up to a...
Read More »
REGO-FIX-® Features Revolutionary Toolholding Solutions at EASTEC
Indianapolis, Indiana, March 9, 2009 - REGO-FIXÃ-® will display an extensive lineup of Swiss quality toolholding solutions at EASTEC 2009. The company's revolutionary powRgrip PG system will be among the many innovations featured in booth 5449 from May 19 - 21 at the Eastern States Exposition Grounds in West Springfield, Massachusetts. REGO-FIX's powRgrip PG system uses a toolholder and...
Read More »REGO-FIX-® Opens New Sales Office in Shanghai
Indianapolis, Indiana, February 2, 2009 - REGO-FIX has announced the grand opening of a new sales office in Shanghai. With a commitment to supporting customers worldwide, REGO-FIX established the new office to meet China's growing demand for innovative production technology. We're seeing China move away from a purely low price strategy and towards a more technologically advanced state, says...
Read More »REGO-FIX-® Switzerland Announces New CEO
Tenniken, Switzerland, February 6, 2009 - REGO-FIX Switzerland has named Richard Weber as its new CEO, replacing Peter Tester, who has retired after a 12-year tenure in the position. Having most recently served as head of strategic business development, Richard Weber is one of the sons of Fritz Weber, founder of REGO-FIX. Success belongs to the companies that recognize industry trends and react...
Read More »