Latest New Product News from
Marvell Semiconductor Inc.
Integrating TE Connectivity's MATEnet modular and scalable connector for automotive Ethernet, Development Platform supports audio video bridging switching solutions with 100BASE-T1 and 1000BASE-T1 Ethernet physical layer capability. Platform enables car manufacturers to quickly prototype automotive systems with Gigabit Ethernet for electrical and electronic architectures including In-Vehicle Infotainment, Advanced Driver Assistance Systems, Electronic Control Units, and Vehicle Domain Gateways. Read More
Equipped with dual core Cortex R5 CPUs, Model 88NV1140 is intended for mass market mobile computing solutions. Embedded SRAM with hardware accelerators optimize IOPS performance, while NANDEdge™ LPDC error-correction technology supports 15 nm triple-level cell and 3D NAND. By leveraging memory allocated from host system, DRAM-less based 88NV1140 is able to scale up performance without limitations of conventional DRAM-less architectures. Read More
With Active Load Modulation, Model 88NF100 supports smallest antenna sizes critical to mobile, IoT, wearable, and automotive applications. Device supports all data rates up to 848 kbps and operates with low polling current of 60 µA, making it suited for power-critical applications. Two-pin interface supports maximum distance of 2 m between chip and antenna. Integrating with Marvell's Wi-Fi®, Bluetooth® and ZigBee® solutions, 88NF100 is compliant with NCI Technical Specification v1.1. Read More
Manufactured with 28 nm lithography in 17 x 17 mm footprint, Alaska® C 88X5111 integrates Multilink Gearbox (MLG) functionality, enables 100 Gbps full duplex transmission, and performs all physical layer functions required for diverse media. Line interface complies with IEEE 802.3BJ and supports Reed Solomon Forward Error Correction (RS-FEC) function required for 100G-CR4, 100G-KR4, and 100G-SR4 operation as well as auto-negotiation and coefficient training protocol required by IEEE 802.3.
Designed for use in systems that require secure product authentication and usage tracking, 88PA810 Trusted Authentication IC integrates CryptoFirewall™ security solution in addition to anti-tampering and anti-reverse engineering technologies. Anti-tampering alarms and extensive circuit obfuscations with active metal mesh coverings, internal clocks, and regulators prevent attackers from using physical attack methods to disrupt or copy chip or its related consumer product. Read More
Based on IAP140 quad-core ARM Cortex A53 application processor, Andromeda Box™ Edge is designed for rapid prototyping and development of smart devices. Andromeda Box™ Connect, featuring ARMADA® 385 dual-core ARM Cortex A9 application processor, enables development of IoT gateway solutions. Systems integrate Brillo, Google's OS based on Android, and natively support Weave protocol, enabling phones and devices to talk to each other locally and remotely through cloud. Read More
Powered by Amazon Web Services, EZ-Connect™ MW302 IoT Starter Kit enables devices to connect to AWS services so that companies can store, process, analyze, and act on volumes of data generated by connected devices on global scale. EZ-Connect MW300/302 single-chip SoC features 1x1 802.11n Wi-Fi and Cortex-M4 microcontroller. Device offers 512 KB SRAM, low-power optimizations, support for A/V streaming, and full set of I/O interfaces including SPI, I2C, UART, I2S, PWM, ADC, and DAC. Read More
Hyper-scale Marvell® AP806 and ARMADA® A3700 are 64-bit ARM Powered® products based on modular chip (MoChi™) architecture. While ARM® Cortex®-A72 based AP806 integrates Marvell's Final-Level Cache architecture and is designed as virtual system-on-chip with multiple storage and networking companion modules, ARMADA A3700 Dual and Single Cortex-A53 based chip integrates networking and storage IPs that can be expanded with additional MoChi modules for connectivity/offload options. Read More
Capable of 220+ ppm page description language (PDL) rendering, 88PA6270 integrates quad-core ARM® Cortex-A53 (64-bit) processor running at 1.2 GHz, 32-bit DDR3/4 memory controller, dual-channel configurable scan and print pipelines, high-speed expansion options, and Vivante® 2D/3D GPU. This 28 nm SoC, which integrates ink, laser, and LED technologies, also advances 3D printers with capabilities needed for object rendering and slicing. Cloud and mobile connectivity are also included. Read More
SDK for HomeKit, built on top of EZ-Connect™ Software SDK, simplifies development of HomeKit accessories. Fully supported solution is available on EZ-Connect Wi-Fi MCU IoT platform, which includes Marvell 88MC200 Cortex-M3 MCU and advanced Avastar® 802.11n wireless radio/Wi-Fi® (88W8801) SoC that, together, provide essential pieces for enabling HomeKit solution. Read More
Equipped to support eMBMS evolved Multimedia Broadcast and Multicast Service technology, ARMADA® PXA1802, PXA1920, PXA1928, PXA1908, and PXA1936 enable smartphones, mobile hotspots, and home gateways to play multicast video streams starting with Android L operating system support. eMBMS provides effective and efficient way to multicast streams on single frequency LTE networks to satisfy growing convergence of linear TV and on-demand content over mobile networks. Read More
Based on integrated Cortex A7 processor operating at up to 1.2 GHz, ARMADA® Mobile PXA1826 targets growing LTE market. Five-mode 4G LTE Release 10 modem chipset supports TD-LTE, FDD-LTE, TD-SCDMA, WCDMA, and GSM, as well as CAT7 data rate and both VoLTE and CSFB voice services. Read More
Combining 802.11ac Wave-2 4x4 processor with beamforming and MU-MIMO support, Avastar® 88W8964 achieves 2.6 Gbps peak data rate for high speed and secure access points and smart gateways. MU-MIMO allows simultaneous and concurrent sessions from one access point to several client devices, while beamforming enables seamless streaming of HD video in locations where devices could previously maintain only minimal connection to network. In addition, 802.11mc provides precision location capability. Read More
Comprising ARMADA-395 SoC and Avastar 88W8964 WiFi processor featuring dual concurrent 802.11 radios, Model AP3200 supports low-power fanless applications such as enterprise access points, smart gateways, and multi-room carrier-grade video distribution. Dual radios integrate 4x4 802.11ac Wave-2 with 160 MHz support and MU-MIMO, and 4x4 802.11n with 256 QAM support. Featuring dual core host CPU running up to 1.8 GHz, ARMADA-395 SoC supports 1 Gbps/2.5 Gbps/10 Gbps Ethernet. Read More
Based on 88PA6120 SoC, integrated 3D Printer SoC solution provides complete reference kit with full-featured functionality to enable turnkey development of 3D printer products. Solution's 88PA6120 SoC integrates 533 MHz ARM v7 compatible processor and dual real-time microprocessors, as well as 10/100 PHY, USB, DRAM, SD, and eMMC. Providing real-time 3D motion control, Linux SDK includes Ethernet and WiFi network stacks, LCD user interface, and board support package. Read More
Featuring NANDEdge™ low-density parity check (LDPC) technology that supports TLC and 3D NAND, DRAM-less NVMe (Non-Volatile Memory Express) SSD controllers 88NV1140 and 88NV1120 foster SFF SSD integration in low-profile tablets, Chrome devices, and 2-in-1 hybrid/detachable mobile PC platforms. While 88NV1140 features AHCI and NVMe support over PCIe Gen3x1, fully hardware-automated NVMe 1.1b support, and low power management (L1.2) design, 88NV1120 offers SATA 6 Gbps and SATA DevSlp support. Read More
Creating Smart TV and set-top box implementations, ARMADA 1500 PRO 4K Ultra HD SoC comprises Qdeo® video processor capable of supporting UTRA HD content, 12K DMIPs Quad Core ARM CPU, and multi-core Vivante GC3000 3D graphics processor. Security engine from Verimatrix includes Trusted Rendering Path and full TrustZone integrations, which ensure protection of premium content on Android platform, and meet strict standards of service operators and content partners. Read More
Supporting up to 4 lanes of PCIe 3.0, Marvell® 88SS1093 NVMe SSD Controller is suitable for full 4 GBps or 2 GBps end points depending on host system customization, and enables optimized IOPS performance using NVMe advanced Command Handling. Device integrates third generation NANDEdge™ error-correcting and low-density parity check technology, which can support 15 nm TLC and 3D NAND. Other features include advanced Tri-core CPU architecture, up to 2 TB support, and SRIS capabilities. Read More
Along with 88MZ100 ZigBee controller, 88EM8189 smart AC/DC LED controller features I²C control interface, integrated standby power supply for networking circuit, and backward compatibility with legacy dimmers. Based on 88EM8801 intelligent DC/DC dual-channel LED controller, 88EM8803 offers LED output range up to 60 V, 1 A for each channel; I²C interface for wireless lighting control; and low-side switches. Read More
Powered by EZ-Connect™ software, wireless silicon platform SoCs include MW300, 802.11n Wi-Fi MCU; MB300 Bluetooth MCU with dual-mode Bluetooth 4.1 support; and MZ100 ZigBee MCU with 802.15.4/ZigBee. These products help OEMs bring new Internet of Things (IoT) applications to market. Software, with SDKs and APIs, enables developers to leverage full potential of built-in MCU on SoC solutions. Read More
Other Company News from
Marvell Semiconductor Inc.