Lyndex-Nikken
Mundelein, IL 60060
Lyndex-Nikken Partners with Mimatic-® Tool Systems to Offer Leading European Live Tools for CNC Lathes, with an Initial Focus on Mazak Lathes
Mundelein, IL - Lyndex-Nikken continues to build upon its inventory of leading live tools with the addition of products from Mimatic Tool Systems' impressive line. Designed and manufactured to Mazak specifications in Germany, Mimatic live tools enhance the performance of CNC lathes. Mimatic live tool housings are machined from solid blocks of a special steel to achieve tight tolerances. Hardened...
Read More »
Shrink Fit Toolholders offer optimized gripping.
Model HSK32E/40E Shrink Fit Tool Holders are prebalanced to 2.5 G at 40,000 rpm while #40 taper/HSK63 holders are balanced to 2.5 G at 20,000 rpm and #50 taper/HSK100 units to 2.5 G at 15,000 rpm. Combined with Shrink Fit Unit, toolholders heat up and cool, with thermal contraction exerting uniform pressure for gripping. Units allow for tool changes in less than 30 sec and are available in both...
Read More »
Tool Holders work with shrink fit machines.
Suited for Makino MAG machines, HSK80F Shrink Fit Holders are designed for machining of complex aluminum monolithic parts for aerospace. When used in combination with Shrink Fit Machine, holders heat up to expand inside diameter, and as they cool, thermal contraction exerts pressure that shrinks down around tool for uniform gripping. Process allows for tool changes in less than 30 seconds.
Read More »Collet System operates at up to 40,000 rpm.
Available in 30-, 40-, and 50-tapers, as well as HSK and 3-Lock models, VC Toolholder features runout within 0.00012 in. at 4 x D. Smooth profile eliminates noise related to high-speed rotation, while groove under nut dampens micro-harmonic vibrations. TiN bearing nut maximizes torque by minimizing friction associated with nut tightening. VC Collet System features 8Ã-
Read More »Shrink Fit Toolholders offer consistent, repeatable results.
Constructed for optimum rigidity, HSK32E/40E, No. 40 taper/HSK63, and No. 50 taper/HSK100 Shrink Fit Holders are respectively pre-balanced to G2.5 at 40,000, 20,000, and 15,000 rpm. Used in combination with a Shrink Fit Unit, products heat up to expand holder ID. As holder cools, thermal contraction exerts uniform pressure that shrinks down around tool for uniform gripping. Process allows for...
Read More »Presetter utilizes CMOS image sensor with STN screen.
Used in tool measurement and inspection, E123 Presetter features solid ground granite column and base construction for rigid and accurate performance. Hand wheels are incorporated for final framing of profile in screen, and fixed rotating spindle uses 6 mini-bearings with radial concentricity error compensation. Offering resolution from 1-5 Ã-µm, measurement over 130 mm X-Axis and 360 mm...
Read More »Collet System operates at up to 40,000 rpm.
Producing high-accuracy finishes, VC Toolholder features slim, smooth profile that eliminates noise related to high-speed rotation and reduces air current created by hex nuts and slots on periphery of most toolholders. Runout is within 0.00012 in. at 4xD, and 8Ã-
Read More »
Lyndex-Nikken Adds Newest High Productivity, High Power Spindle Speed Increaser to HiSpinner-® Line
Mundelein, IL - (September 1, 2006) Lyndex-Nikken's latest HiSpinner offers substantial increases in spindle speeds for high-speed milling operations. Lyndex-Nikken's spindle speeder increases RPMs up to 40,000, and reduces the expected cycle times of a machine. This HiSpinner is especially ideal for light milling applications. Featuring tempered and ground gears, it offers high precision...
Read More »
Angle Heads suit high performance machining centers.
Available in straight and offset units with internal/external coolant, AngleHeads feature precise bearing technology, lifetime lubrication, and labyrinth seals to protect bearings from dirt and coolant penetration. Concentricity and facing accuracy is less than 5 Ã-µ, and internal coolant supply is up to 70 bar. Units are offered in single- or multi-spindle types, as well as quick-change...
Read More »
Rotary Tilt Table suits high production applications.
Featuring 105 mm diameter table and max workload of 15 kg per spindle, multi-spindle Model 5AX-2MT provides rotational speed of 22.2 rpm and tilting rotational speed of 11.1 rpm. Both rotary and tilting axes can be controlled by machine's CNC control or via independent controllers. Included braking system produces 147 Nm clamping torque. Options are available to meet workholding, fixturing, and...
Read More »Lyndex-Nikken Establishes Mexico Office
Mundelein, IL - Lyndex-Nikken has announced the creation of Herramientas Lyndex-Nikken S.A. de C.V., a wholly owned subsidiary, in Mexico. This new entity was created to support existing business and build new business relationships in Mexico. Investment by manufacturers in Mexico is currently growing faster than most countries in the world. This local operation was established to provide the...
Read More »Lyndex-Nikken Partners with Mimatic-® Tool Systems to Offer Leading European Live Tools for CNC Lathes, with an Initial Focus on Mazak Lathes
Mundelein, IL - Lyndex-Nikken continues to build upon its inventory of leading live tools with the addition of products from Mimatic Tool Systems' impressive line. Designed and manufactured to Mazak specifications in Germany, Mimatic live tools enhance the performance of CNC lathes. Mimatic live tool housings are machined from solid blocks of a special steel to achieve tight tolerances. Hardened...
Read More »
Shrink Fit Toolholders offer optimized gripping.
Model HSK32E/40E Shrink Fit Tool Holders are prebalanced to 2.5 G at 40,000 rpm while #40 taper/HSK63 holders are balanced to 2.5 G at 20,000 rpm and #50 taper/HSK100 units to 2.5 G at 15,000 rpm. Combined with Shrink Fit Unit, toolholders heat up and cool, with thermal contraction exerting uniform pressure for gripping. Units allow for tool changes in less than 30 sec and are available in both...
Read More »
Tool Holders work with shrink fit machines.
Suited for Makino MAG machines, HSK80F Shrink Fit Holders are designed for machining of complex aluminum monolithic parts for aerospace. When used in combination with Shrink Fit Machine, holders heat up to expand inside diameter, and as they cool, thermal contraction exerts pressure that shrinks down around tool for uniform gripping. Process allows for tool changes in less than 30 seconds.
Read More »Collet System operates at up to 40,000 rpm.
Available in 30-, 40-, and 50-tapers, as well as HSK and 3-Lock models, VC Toolholder features runout within 0.00012 in. at 4 x D. Smooth profile eliminates noise related to high-speed rotation, while groove under nut dampens micro-harmonic vibrations. TiN bearing nut maximizes torque by minimizing friction associated with nut tightening. VC Collet System features 8Ã-
Read More »Shrink Fit Toolholders offer consistent, repeatable results.
Constructed for optimum rigidity, HSK32E/40E, No. 40 taper/HSK63, and No. 50 taper/HSK100 Shrink Fit Holders are respectively pre-balanced to G2.5 at 40,000, 20,000, and 15,000 rpm. Used in combination with a Shrink Fit Unit, products heat up to expand holder ID. As holder cools, thermal contraction exerts uniform pressure that shrinks down around tool for uniform gripping. Process allows for...
Read More »Presetter utilizes CMOS image sensor with STN screen.
Used in tool measurement and inspection, E123 Presetter features solid ground granite column and base construction for rigid and accurate performance. Hand wheels are incorporated for final framing of profile in screen, and fixed rotating spindle uses 6 mini-bearings with radial concentricity error compensation. Offering resolution from 1-5 Ã-µm, measurement over 130 mm X-Axis and 360 mm...
Read More »Collet System operates at up to 40,000 rpm.
Producing high-accuracy finishes, VC Toolholder features slim, smooth profile that eliminates noise related to high-speed rotation and reduces air current created by hex nuts and slots on periphery of most toolholders. Runout is within 0.00012 in. at 4xD, and 8Ã-
Read More »Lyndex-Nikken Mourns Loss Of Vice-Chairman Gen Irie, Prominent Member Of Manufacturing Community
Mundelein, IL - (December 5, 2006) Gen Irie, the vice-chairman of Lyndex-Nikken, died Dec. 4, 2006 of an apparent heart attack near his Schaumburg, Ill. home at the age of 59, according to company officials. It is hard to put into words how important he was to our company, said Jun Hayashi, Lyndex-Nikken President. Through his strong leadership, focus on providing a quality product, marketing...
Read More »
Lyndex-Nikken Adds Newest High Productivity, High Power Spindle Speed Increaser to HiSpinner-® Line
Mundelein, IL - (September 1, 2006) Lyndex-Nikken's latest HiSpinner offers substantial increases in spindle speeds for high-speed milling operations. Lyndex-Nikken's spindle speeder increases RPMs up to 40,000, and reduces the expected cycle times of a machine. This HiSpinner is especially ideal for light milling applications. Featuring tempered and ground gears, it offers high precision...
Read More »