Artesyn Technologies, Inc.
Boca Raton, FL 33434
Share:
DIN Rail Power Supply is designed for extended operational life.
Available inÃ- 40, 60, and 96 W power ratings, ADNB series has universal 88–264 Vac input and global safety approvals, can also operate fromÃ- 124–370 Vdc input, and offers regulated output voltages of 12, 15, 24, and 48 Vdc. Typ efficiency is 84%–88%, and DIN rail mounting clip enables tool-free snap-on mounting in industrial environments. Protected against overvoltage, overload,...
Read More »Artesyn Demonstrates MicroTCA Development Platform at VON
Readies Joint Media Server/Gateway System With Surf Communication Solutions See MicroTCA Demo at VON -- Surf Communication Solutions and Artesyn Technologies Booth # 947 MADISON, Wis., March 9 -- Artesyn Communication Products, a subsidiary of Artesyn Technologies (NASDAQ:ATSN), today announced that it will be demonstrating its new MicroTCA development platform at the VON show in San Jose on...
Read More »
Point-of-Load Converters suit space-sensitive applications.
Intended for computer, storage, and networking applications, RoHS-compliant LDO-C and SIL-C2 models are available with choice of vertical or horizontal through-hole mounting and horizontal surface mounting. LDO-C models offer choice of 3, 6, and 10 A outputs, while SIL-C2 models offer 20 or 40 A outputs. Protected against short-circuit and overvoltage conditions, converters use fixed frequency...
Read More »MicroTCA Platform helps develop wireless/IMS applications.
Designed for wireless base station, MSPP, and IPPBX application evaluation/development, microTCA platform utilizes 12-slot microTCA chassis equipped with microTCA Carrier Hub (MCH) module, power supply, Fat Pipe switch module, application/protocol processing, and platform management software. Design allows for independent control and data plane operation, while MCH provides IPMI management,...
Read More »
AC-DC Power Supplies provide front-end power conversion.
Measuring 5 x 3 x 1.25 in., open-frame 150 W Series TLP150 offers choice of 12, 24, or 48 V outputs and provides 12.5, 6.3, and 3.2 A, respectively. Main output channel delivers up to 100 W continuously under free air convection conditions, rising to 150 W with 200 lfm forced air cooling. With universal input from 85-264 Vac, RoHS-compliant power supplies use switch-mode technology to achieve 81%...
Read More »
Full-Brick DC/DC Converters have 700 W continuous rating.
Suited for use with RF power amplifiers, RFF series generates regulated intermediate bus voltage in telecom systems with distributed power architecture. Each model produces 28 Vdc output, which can be adjusted over 16.8-29.4 V range. Comprised of 5 isolated models with choice of 2 input voltage ranges and 3 output current ratings, series includes 7-10 Vdc auxiliary output as well as ability to be...
Read More »DC-DC Converter uses open standard communications protocol.
With input range of 4.5-13.8 V, PMBus-compliant 20 A Model DPL20C offers programmable output voltage from 0.6-5.5 V as well as programmable sequencing, tracking, and margining. Non-isolated, POL converter offers real-time monitoring of voltage, current, and temperature, with automatic warning of fault conditions. It stores all configuration and set-up data in non-volatile memory, and powers-up...
Read More »
AC-DC Power Supplies suit distributed power applications.
Housed in 4 x 7 x 1.5 in. package for 1U-high rack installation, Series NLP250 provides 12, 24, or 48 V outputs, as well as auxiliary, always-on 5 Vdc output. Employing switch-mode technology, units feature power density of 6.0 W per cu-in. Main output channel can deliver 175 W continuously under free air convection conditions, rising to 250 W with 200 lfm forced air cooling. All models have...
Read More »
POL Converters feature footprints down to 0.9 x 0.33 in.
Designed for applications with limited board space, PTV series is comprised of 8 vertical-mount, non-isolated point-of-load (POL) dc/dc converters with efficiencies up to 94%. Units feature power conversion and control technology with Auto-Track(TM) power sequencing and pre-bias start-up capability. Taking up as little as 0.3 in.Ã-² PCB real estate, series offers current outputs of 8, 16, and...
Read More »
POL Converters are suited for densely populated boards.
Occupying board area of 2.14 in.Ã-², open-frame PTHxx040W series features output voltage adjustment and Auto-Track(TM) power sequencing. Model PTH12040W has output current rating of 50 A and 8-14 V input voltage range, while PTH04040W has 60 A rating and input range of 2.95-5.5 V. Series is Point-of-Load Alliance (POLA)-compliant and employs switching frequency of 1.05 MHz to achieve full...
Read More »
DIN Rail Power Supply is designed for extended operational life.
Available inÃ- 40, 60, and 96 W power ratings, ADNB series has universal 88–264 Vac input and global safety approvals, can also operate fromÃ- 124–370 Vdc input, and offers regulated output voltages of 12, 15, 24, and 48 Vdc. Typ efficiency is 84%–88%, and DIN rail mounting clip enables tool-free snap-on mounting in industrial environments. Protected against overvoltage, overload,...
Read More »Artesyn Shareholders Approve Acquisition by Emerson Electric
Boca Raton, Fla., April 28, 2006 - Artesyn Technologies, Inc. (Nasdaq: ATSN), a world leader in power conversion and embedded board solutions for communications infrastructure applications, announced today that its shareholders have voted to approve the acquisition via merger of Artesyn by Emerson Electric Co. At a special meeting of Artesyn shareholders held today, the merger was approved by...
Read More »Artesyn Demonstrates MicroTCA Development Platform at VON
Readies Joint Media Server/Gateway System With Surf Communication Solutions See MicroTCA Demo at VON -- Surf Communication Solutions and Artesyn Technologies Booth # 947 MADISON, Wis., March 9 -- Artesyn Communication Products, a subsidiary of Artesyn Technologies (NASDAQ:ATSN), today announced that it will be demonstrating its new MicroTCA development platform at the VON show in San Jose on...
Read More »
Point-of-Load Converters suit space-sensitive applications.
Intended for computer, storage, and networking applications, RoHS-compliant LDO-C and SIL-C2 models are available with choice of vertical or horizontal through-hole mounting and horizontal surface mounting. LDO-C models offer choice of 3, 6, and 10 A outputs, while SIL-C2 models offer 20 or 40 A outputs. Protected against short-circuit and overvoltage conditions, converters use fixed frequency...
Read More »MicroTCA Platform helps develop wireless/IMS applications.
Designed for wireless base station, MSPP, and IPPBX application evaluation/development, microTCA platform utilizes 12-slot microTCA chassis equipped with microTCA Carrier Hub (MCH) module, power supply, Fat Pipe switch module, application/protocol processing, and platform management software. Design allows for independent control and data plane operation, while MCH provides IPMI management,...
Read More »
AC-DC Power Supplies provide front-end power conversion.
Measuring 5 x 3 x 1.25 in., open-frame 150 W Series TLP150 offers choice of 12, 24, or 48 V outputs and provides 12.5, 6.3, and 3.2 A, respectively. Main output channel delivers up to 100 W continuously under free air convection conditions, rising to 150 W with 200 lfm forced air cooling. With universal input from 85-264 Vac, RoHS-compliant power supplies use switch-mode technology to achieve 81%...
Read More »EMERSON TO ACQUIRE ARTESYN TECHNOLOGIES
ST. LOUIS, MO and BOCA RATON, FL; FEBRUARY 2, 2006 - Emerson (NYSE: EMR) and Florida-based Artesyn Technologies (NASDAQ: ATSN) today announced that Artesyn will become part of Emerson Network Power. Emerson will acquire Artesyn for $11 a share in cash (approximately $500 million net of acquired cash) pending customary regulatory approvals and approval by Artesyn shareholders. The agreement brings...
Read More »Artesyn Reports Third Quarter 2005 Financial Results
BOCA RATON, Fla., November 04, 2005 - - Artesyn Technologies, Inc. (Nasdaq: ATSN) today reported financial results for the third quarter ended September 30, 2005. Sales for the third quarter of 2005 were $102.0 million compared to $107.0 million for the corresponding quarter in 2004. Net income for the third quarter of 2005 was $4.0 million, or $0.09 per share, compared to net income of $3.6...
Read More »
Full-Brick DC/DC Converters have 700 W continuous rating.
Suited for use with RF power amplifiers, RFF series generates regulated intermediate bus voltage in telecom systems with distributed power architecture. Each model produces 28 Vdc output, which can be adjusted over 16.8-29.4 V range. Comprised of 5 isolated models with choice of 2 input voltage ranges and 3 output current ratings, series includes 7-10 Vdc auxiliary output as well as ability to be...
Read More »DC-DC Converter uses open standard communications protocol.
With input range of 4.5-13.8 V, PMBus-compliant 20 A Model DPL20C offers programmable output voltage from 0.6-5.5 V as well as programmable sequencing, tracking, and margining. Non-isolated, POL converter offers real-time monitoring of voltage, current, and temperature, with automatic warning of fault conditions. It stores all configuration and set-up data in non-volatile memory, and powers-up...
Read More »