Latest New Product News from
Leveraging chip on board LED package to optimizes lumen output, LED PAR30 and PAR38 lamps are offered in 3000K and 4000K color temperatures and rated for 25,000 hr lifetime at L70 standards. Lamps are suited for retrofitting recessed, track, and other lighting fixtures operating on 277 V electrical systems; can also be used in damp locations; and operate from -4 to +104°F. While 17 W PAR38 delivers up to 1,800 lm with 40° beam angle, long neck 13 W PAR 30 produces up to 1,200 lm.
Engineered for 25 ft and higher ceiling applications, 150 Watt LED Pendant Round HighBay Fixtures come in narrow beam distribution that delivers 14,969 lm and efficacy of 96.7 lm/W, as well as wider distribution model that delivers greater than 16,640 lm and efficacy of 109 lm/W. Units have enclosed power supply housing and covered optics that ensure durability and minimal maintenance disruptions. Dimmable down to 10% on 0–10 V systems, LEDs have 50,000-hour lifetime. Read More
Featuring LM80-tested LEDs, BayMAX LED Linear High Bay Fixtures replace T8 and T5 fluorescent fixtures as well as HID high bays in industrial environments with 15–40 ft ceilings, including box retailers, gyms, manufacturing facilities, and warehouses. Units come in 115, 150, and 235 W models that deliver more than 12,000, 17,000, and 25,000 lumens, respectively. Constructed with 22-gauge steel housing, fixtures operate on universal 120–277 V electrical systems for minimum of 100,000 hr. Read More
Rated at 50 W, LED Vapor Tight Linear Fixtures replace fluorescent strip lights in garages and stairwells with uniform, low-glare illumination. Dimmable units deliver 4,197 lumens and exceed IES footcandle recommendations for parking area, driving lane, and stairwell compliance. Offered in standard length of 4 ft, fixtures are constructed with one-piece, non-corrosive polycarbonate body that protects LED light source from dust, dirt, and vandalism. Read More
While equivalent to miniature 20 W halogen lamps used in landscape, accent, under-cabinet, pendant, and decorative lighting fixtures, LED wedge and G4 base lamps consume 2.5 W and distribute warm 2,700K light with 80 CRI via omnidirectional beam. Lamps work with 12 V electronic and magnetic transformers, have 25,000 hr life (minimum), may be used in dry locations, and are constructed with ceramic base and feature clear diffuser that maximizes light output up to 180 lm.
Designed to replace CFL and halogen fixtures, Plug-and-Play LED Lightbars are damp-listed for use in indoor areas subject to condensation, certified by NSF, and suited for food/beverage processing environments. ETL-listed connection box allows hardwired connection to lightbar system, while profile lets wiring connection be located in various locations. Low-profile distribution hub with integrated on/off switch allows up to 4 separate light bar chains to run from same 120 V source. Read More
Mounting to standard 4 in. junction box, LED Faux Cans allow installers to achieve downlighting without use of bulky can. Wet-listed fixtures are available in 4 and 6 in. diameters, with 13 and 15 W outputs, respectively. Equivalent to 75 W Par 30 halogen lamp, LED Faux Cans offer vivid color rendering with 90+ CRI light standard. Dimmable units are ENERGY STAR-certified, support California Title 24 compliance, and feature driverless technology. Read More
LED Flush Mount Ceiling Fixtures include traditional, contemporary, and architectural styles that feature brushed nickel or oil-rubbed bronze trim as well as frosted, ribbed, swirled, and etched glass diffuser types. Rated for use in damp locations, fixtures come in 11 and 15 W versions and small (11 in.), medium (13–15 in.), and large (16–17 in.) diameters. Fixtures feature Driver on Board technology and can be controlled with standard on/off switches and electronic low-voltage dimmers. Read More
Utilizing chip on board LED package, LED PAR Lamps come in 7, 12, and 15 W models, which replace 50, 75, and 120 W incandescents, respectively. Lamps are available in CCTs ranging from 2,700–5,000 K with choice of 25° narrow flood or 40° wide flood beam spread. Suited for downlighting applications, LED BR Lamps include 7, 11, and 17 W models that replace 50, 65, and 100 W incandescent lamps, respectively. Units offer CCTs of 2,700, 3,000, and 4,100 K with CRI of greater than 80. Read More
Available in 40 W, 2 x 2 ft model and 45 W, 2 x 4 ft model, DLC-qualified Recessed Troffer Retrofit Kits enable installers to convert fluorescent troffers to LED light source without removing existing fixture. Units are compatible with 0–10 V dimming systems and are offered in standard correlated color temperatures of 3,500, 4,100, and 5,000 K. Weighing less than 6 lb, kits retrofit troffers in T-grid drop ceilings common in offices, schools, health care facilities, and public buildings. Read More
Available in 180, 360, or 540 W with narrow, medium, or wide beam angle, StaxMAX LED Flood Lights allow users to create custom distribution by mixing modules on single fixture. Units have die cast aluminum body that acts as heat sink, enabling L70-rated LED lifetime between 75,000 and 90,000 hours. Tempered glass lens seals module to protect against dirt, dust, and water ingress to IP65 rating. Applications include parking lots, car dealerships, sports parks, facades, and marine harbors. Read More
Helping hospitality market reduce power consumption and conserve energy, Wet-Listed Marquee LED Lamp replaces incandescent and CCFL lamps in outdoor signage applications. Construction optimizes thermal management, enabling L70-rated 50,000 hr lifetime. Consuming 2.5 W, warm white LED lamp comes in clear or frosted styles, switches on instantly to full brightness, and is designed with collimator that projects omnidirectional lighting pattern (including backwards).
Constructed with one-piece, non-corrosive, polycarbonate body, DLC-qualified LED Vapor Tight Linear Fixtures carry IP66 rating and can be installed by suspension or mounted to walls or ceilings. Thermal- and lumen-balanced light engines are engineered with low drive rates to allow cooler operating temperatures. Offered in 8 basic models covering 2 and 4 ft sizes and 30 and 50 W ratings, dimmable products are watertight and can serve as replacement for fluorescent strip lighting. Read More
Designed to replace multiple F17 and F32 fluorescent lamps, LED Utility Wraps come in 2 and 4 ft LED models ranging from 20–50 W. Dimmable units operate on 120–277 V systems, offer CCTs of 4,000 and 5,000 K, and provide efficacies up to 107 lm/W. Constructed with heavy-gauge, 1-piece steel housing and full-length U-Wrap prismatic acrylic diffusers, fixtures deliver up to 10 fc from IES recommended heights for stairwells, and 7–10 fc at 8 ft installed heights for parking drive lane compliance. Read More
Suited for new construction applications, ENERGY STAR®-certified LED Architectural Recessed Downlights offer flexible installation options and quick connect LED module that facilitates electrical installation. Non-IC LED downlights are dimmable and can replace 50 W halogen, 39 W ceramic metal halide, and 100 W HID fixtures. Available in 3,000K and 4,000K CCTs, 4 in. model comes in 15 and 26 W versions, while 6 and 8 in. styles come in 15, 26, and 34 W ratings with up to 2,145 lm delivered. Read More
Designed for recessed cans with nominal 6 in. dia, LED Residential Downlight Retrofits deliver color rendering index of 90. Units are available in 12 and 19 W models that capture warmth of 75 and 120 W incandescent fixtures, respectively, and deliver up to 1,200 lm. Dimmable down to 10% for additional energy savings, retrofits come with torsion springs and Edison-base adapter. Thermally protected driver and die-cast aluminum heat sink help sustain cool operation. Read More
Featuring slim installation depth for flush fit, FlatMAX Edge Lit LED Panels are fully dimmable and compatible with building controls, motion sensors, timers, and daylight harvesting systems. Panels come in 3,500, 4,100, and 5,000 K CCTs and deliver up to 4,500 lm with CRI of 80. Optic guide plate controls glare and provides uniform light distribution. Constructed with aluminum housing that provides heat sink, lights come in 36 W, 1 x 4 ft model as well as 45 W, 2 x 2 and 2 x 4 ft versions. Read More
Featuring MicroCell™ louvers and architectural styling, Micro-T™ Lay-In LED Panel comes in 1 x 4 ft, 2 x 2 ft, and 2 x 4 ft configurations with 100° beam distribution, multiple color and lumen packages, and rear knockouts that facilitate installation. Dual-function precision optics reduce glare and increase efficiency, and damp-listed fixture is constructed with sheet steel housing, separate LED driver enclosure, and impact-resistant polycarbonate lens. All models exceed 90 lm/W efficacy. Read More
Respectively designed to replace 13 and 18 W CFLs, 5 and 7 W LED PL Retrofit Lamps are available with GU24, GX23, and G24q pin base options. Lamp holder rotates 270°, and ballast bypass ensures maintenance-free operation. Offering instant-on capabilities, these lamps deliver CRI >82, uniform consistency, and 50,000 hr of operational life. Operation is from 120–277 V, and output ranges from 450–750 lm with up to 110 lm/W efficacy. CCTs range from 2700K to 5,000K. Read More
Featuring MaxFOCUS light collimator and thermal pressure plate, Small LED Flood Lights are DLC-qualified and available in 15, 25, and 45 W styles that deliver narrow beam optics from 72° and wide beam from 101°. Wet-rated lights replace 100 W quartz halogen and 150 W and 175 W metal halide fixtures in landscapes, facades, displays, and signage. Constructed with IP65-rated cast aluminum housing, lights operate on 120–277 V electrical systems, and deliver outputs up to 3,360 lm and 81 lm per W. Read More
Other Company News from