Company News

Atlanta Drive Systems

1775 Rte. 34, Farmingdale, NJ, 07727, US

  • 732-282-0480
  • 800-505-1715
Share Like Tweet Add Email

Latest New Product News from
Atlanta Drive Systems

Material Handling & Storage, Fasteners & Hardware

Screw-Jacks offer precise linear positioning.

May 21, 2014

Utilizing servo-worm reducer and precision ballscrew spindle, High-Performance Screw-Jacks achieve linear speeds up to 590 ips with ballscrew diameters up to 50 mm and axial load capacities up to 22,500 lb. Units are available in 4 sizes with rotating ballscrews and translating nut, or non-rotating ballscrew in lifting cylinder design. Protected against contamination by bellows or protective tubes, ballscrew spindles are continuously lubricated with automatic lubrication system. Read More

Material Handling & Storage

Hardened and Ground Racks offer optimal precision.

February 6, 2013

Offering alternative to DIN 6 racks, HPR High-Precision DIN 7 and 8 quality levels meet customer's accuracy needs and are dimensionally interchangeable for drop-in replacement. Ultra-High Precision (UHPR) gear racks utilize carburized case-hardening process to increase strength of rack, including tooth flanks and root, which maximizes power density, stiffness, and performance. Read More

Mechanical Power Transmission

Rack and Pinion Drive Systems come in several configurations.

February 10, 2012

Precision Planetary Rack and Pinion Drive Systems offer helical or straight (spur) rack and pinions. HighForce ZTRS systems, for applications with thrust forces to 28,000 lb, feature drives available in 5 sizes with backlash levels down to 1 arc-min. For applications with thrust forces to 12,000 lb, ZTR and ZR systems come in 7 sizes with backlash levels down to 1 arc-min. Planetary reducers with solid output shafts are available for applications with thrust forces to 4,500 lb. Read More

Material Handling & Storage

Precision Gear Racks suit machine tool and aerospace industries.

October 8, 2010

Available in straight and helical versions, Strong Line of Gear Racks utilize carburized case-hardening process to optimize strength of rack, including tooth flanks and root, mounting holes, and back and side surfaces. This allows back surface to be used with cam follower roller bearings for guiding axis. Racks are precision ground on teeth and all sides to achieve accurate pitch deviation and parallelism. With max holding force, mounting holes insure rack remains stationary under high forces. Read More

Mechanical Power Transmission

Flanged Pinions feature quality level of DIN 5.

November 26, 2008

Featuring compact design to minimize amount of drive torque required, ISO 9409-1 TR Flanged Pinions are available in straight and helical-toothed versions, in metric modules 2.0 through 8.0. Hardened and ground units are suited for pick and place robots, traveling gantries and columns, and material handling axis drives. Read More

Material Handling & Storage

Machine Tool Gear Racks are built for optimal precision.

July 3, 2007

High-Precision Gear Racks are precision manufactured in controlled environment, achieving tooth quality of DIN 4 with total pitch error of less than 12 microns over 1 m length and parallelism tolerance of less than 15 microns. Pitch can eliminate need for electronic compensation, and parallelism accommodates drives with low backlash without need for preloading. Racks come in straight and helical versions - in 5, 6, 8 and 10 modules - with linear force capacities to 45,000 lb. Read More

Mechanical Power Transmission

Servo Worm Reducers are available in 4 versions.

July 13, 2006

High-Precision Servo-Worm Reducers are offered in High Torque model that reduces backlash level to less than one arc-min and includes options for flanged connections based on ISO 9409. Economy-Servo version delivers backlash level of less than 6 arc-min, while Basic-Servo provides backlash level of less than 12 arc-min. Range of motor couplings and mounting flanges are available, and hollow bore output can be used to mount output shafts, pinion shafts, or other drive elements. Read More

Mechanical Power Transmission

Servo Worm Reducers offer 4 levels of precision.

May 18, 2005

In addition to High Precision model, Servo Worm Reducers are available in High Torque model with backlash of less than 1 arc-min, Economy version with less than 6 arc-min backlash, and Basic model with backlash of less than 12 arc-min. Four levels of precision allow machine designer to select required reducer precision to meet specific needs. Applications include rotary axis drives, traveling gantries and columns, and material handling axis drives. Read More

Other Company News from
Atlanta Drive Systems