Danaher Motion/Thomson Linear Bearing
Mayfield Heights, OH 44124
Share:
Ball Transfer/Transfer Systems use hollow ball technology.
Systems utilize hollow balls that provide 6,000 lb crush strength minimum per unit. Constructed with stainless cup and can for corrosion resistance, units have 1 in. stainless hollow ball riding on 1/8 in. stainless balls. Available with ball-up, ball-down, or angled mounting, products have nylon-flanged base and do not require lubrication. Operating temperature is 250Ã-
Read More »
Polymer Bearings damp out noise and vibration.
NylinerÃ-® engineered polymer bearings are available in 7 sleeve, flanged, and snap-in types. They are offered in 225 standard millimeter and inch sizes, with inside dimensions ranging from 3/16 to 1Ã-½ in. Injection molded Nyliner bearings provide smooth, quiet operation, are corrosion-resistant, and do not require lubrication.
Read More »
Miniature Ball Screws utilize internal ball return technology.
Miniature Ball Screws provide 95% typical efficiency. Standard diameter starts at 4 mm, with 1 mm lead, and will include 6 mm and 8 mm diameters as well. Manufactured as both rolled and ground units, ball screws come in precision classes from ISO3 to ISO7 (0.012/300 mm to 0.050/300 mm). They have nylon wipers to protect from ingress of contamination. Units can be supplied with ends machined...
Read More »
Ball Screws are clean room compatible.
Ball Screws are assembled, packaged, and nitrogen purged inside laminar flow, Class 10 clean room environment. They are lubricated, bagged, and sealed to eliminate contamination and enhance shelf life. Custom clean room hollow and telescoping screws can be designed and built, in addition to stainless steel and chrome plated assemblies. Inch and metric sizes are available with preloaded and...
Read More »
Precision Balls come in distinctive shapes.
Precision Balls are offered in flat, diagonally cut, cone, and pin shapes that are typically used as hardened polishing and shaping tools. Sizes range from 1/6 to 1 in. in stainless steel, 52100 chrome, and ceramic materials. Balls are QS-9000 certified and ISO 9002 registered.
Read More »
Miniature Linear Guides require little or no lubrication.
MicroGuide(TM) linear guides, with 440C stainless steel construction, have Gothic Arch ball-groove geometry for quiet, single-rail operation, and provide accuracy up to Ã-
Read More »
Linear Actuator transmits thrust actions.
Compact MaxJac(R) actuator delivers variable speed control for thrust applications such as throttle control, fine lift adjustments, and valve actuation in RVs, commercial cleaning machines, construction equipment, and medical pumps. It has back drivable piston, manual override, and 12 Vdc gearmotor that produces continuous torque of 20 oz-in. Actuator operates at speeds up to 2.2 in/sec and...
Read More »
Planetary Gearheads offer steel gears hardened to HRC 60.
NemaTRUE(TM) Planetary Gearheads include 60, 90, and 115 mm frame sizes. RediMount(TM) compliant, 2 front face options provide drop-in replacement for competitive gearheads, parallel-shaft spur gearheads, and similar reducers. Features include 13 arc-minute maximum backlash, ratios from 3:1 to 100:1 in all sizes, and anodized aluminum housing. Peak torque is rated to 1600 in/lbs, and peak radial...
Read More »
Linear Stage suits multi-axis pick and place applications.
MicroStage 46(TM) linear stage is available in belt and ball screw actuated configurations. Manufactured from aluminum, it incorporates steel 60 Case(TM) LinearRace(TM) shafts and Ball Bushing(TM) bearing technology. Bearing segment design features backlash free assembly. Redi-Mount(TM) compliant, slide permits mounting of servo/stepping motors as well as gearheads. MicroStage 46 is available...
Read More »
Planetary Gearheads can be mounted to any motor.
UltraTRUE(TM) Planetary Gearheads, available in 90 and 115 mm sizes, are offered as in-line or right angle models. Features include 4-arc-minute backlash and crowned helical carburized steel gears hardened to HRC 60 (min.) and flank-finished after heat treating. Gearheads offer ratios from 1:1 to 100:1, peak torque from 1700 to 5300 in-lb, and peak radial load from 1500 to 2500 lbs. UltraTRUE...
Read More »
Ball Transfer/Transfer Systems use hollow ball technology.
Systems utilize hollow balls that provide 6,000 lb crush strength minimum per unit. Constructed with stainless cup and can for corrosion resistance, units have 1 in. stainless hollow ball riding on 1/8 in. stainless balls. Available with ball-up, ball-down, or angled mounting, products have nylon-flanged base and do not require lubrication. Operating temperature is 250Ã-
Read More »
Polymer Bearings damp out noise and vibration.
NylinerÃ-® engineered polymer bearings are available in 7 sleeve, flanged, and snap-in types. They are offered in 225 standard millimeter and inch sizes, with inside dimensions ranging from 3/16 to 1Ã-½ in. Injection molded Nyliner bearings provide smooth, quiet operation, are corrosion-resistant, and do not require lubrication.
Read More »
Miniature Ball Screws utilize internal ball return technology.
Miniature Ball Screws provide 95% typical efficiency. Standard diameter starts at 4 mm, with 1 mm lead, and will include 6 mm and 8 mm diameters as well. Manufactured as both rolled and ground units, ball screws come in precision classes from ISO3 to ISO7 (0.012/300 mm to 0.050/300 mm). They have nylon wipers to protect from ingress of contamination. Units can be supplied with ends machined...
Read More »
Ball Screws are clean room compatible.
Ball Screws are assembled, packaged, and nitrogen purged inside laminar flow, Class 10 clean room environment. They are lubricated, bagged, and sealed to eliminate contamination and enhance shelf life. Custom clean room hollow and telescoping screws can be designed and built, in addition to stainless steel and chrome plated assemblies. Inch and metric sizes are available with preloaded and...
Read More »
Precision Balls come in distinctive shapes.
Precision Balls are offered in flat, diagonally cut, cone, and pin shapes that are typically used as hardened polishing and shaping tools. Sizes range from 1/6 to 1 in. in stainless steel, 52100 chrome, and ceramic materials. Balls are QS-9000 certified and ISO 9002 registered.
Read More »
Miniature Linear Guides require little or no lubrication.
MicroGuide(TM) linear guides, with 440C stainless steel construction, have Gothic Arch ball-groove geometry for quiet, single-rail operation, and provide accuracy up to Ã-
Read More »
Linear Actuator transmits thrust actions.
Compact MaxJac(R) actuator delivers variable speed control for thrust applications such as throttle control, fine lift adjustments, and valve actuation in RVs, commercial cleaning machines, construction equipment, and medical pumps. It has back drivable piston, manual override, and 12 Vdc gearmotor that produces continuous torque of 20 oz-in. Actuator operates at speeds up to 2.2 in/sec and...
Read More »
Planetary Gearheads offer steel gears hardened to HRC 60.
NemaTRUE(TM) Planetary Gearheads include 60, 90, and 115 mm frame sizes. RediMount(TM) compliant, 2 front face options provide drop-in replacement for competitive gearheads, parallel-shaft spur gearheads, and similar reducers. Features include 13 arc-minute maximum backlash, ratios from 3:1 to 100:1 in all sizes, and anodized aluminum housing. Peak torque is rated to 1600 in/lbs, and peak radial...
Read More »
Linear Stage suits multi-axis pick and place applications.
MicroStage 46(TM) linear stage is available in belt and ball screw actuated configurations. Manufactured from aluminum, it incorporates steel 60 Case(TM) LinearRace(TM) shafts and Ball Bushing(TM) bearing technology. Bearing segment design features backlash free assembly. Redi-Mount(TM) compliant, slide permits mounting of servo/stepping motors as well as gearheads. MicroStage 46 is available...
Read More »
Planetary Gearheads can be mounted to any motor.
UltraTRUE(TM) Planetary Gearheads, available in 90 and 115 mm sizes, are offered as in-line or right angle models. Features include 4-arc-minute backlash and crowned helical carburized steel gears hardened to HRC 60 (min.) and flank-finished after heat treating. Gearheads offer ratios from 1:1 to 100:1, peak torque from 1700 to 5300 in-lb, and peak radial load from 1500 to 2500 lbs. UltraTRUE...
Read More »