International Fiber Systems, Inc.
Newtown, CT 06470
Share:
Managed Layer 2 Ethernet Switch features 9 optical ports.
Along with Gigabit Ethernet transmission capability, EtherNav(TM) D7608 features mechanisms to monitor, configure, and manage VLAN. Console interface, using RS-232 interface, allows for local network control from PC, while web-based GUI enables remote configuration control. Mechanically and environmentally hardened unit features up to 9 optical 10/100 FX fast Ethernet ports. It supports SNMP v2C,...
Read More »MPEG 4 Video CODEC has optical Ethernet output.
EtherNav(TM) DEV7100 Series allows single baseband NTSC video, camera control data, and audio signal to be IP-encoded and transported on 10/100 Base-T Ethernet network; output can be 10/100TX electrical, 100 FX optical, or baseband video output connection. Controlled with Symnet software, monitoring and remote PTZ control can be accessed from central monitoring station or any computer with...
Read More »
Self-Healing Ethernet Switch ensures 3-level redundancy.
When equipped in ring with 4 or more units, Series D7400WDM-RSH offers 3 levels of redundancy. In event of fiber failure, unit automatically reroutes Ethernet data to other fiber in less than 1 sec, insuring uninterrupted transmission. Switch provides point-to-point transmission of three 10/100 Mbps Ethernet data signals over one multimode or single-mode optical fiber, with fourth port operating...
Read More »
Transmitter and Receiver deliver video over UTP cable.
IFS Copperline TPT1000M and TPR1000 video transmitter and receiver deliver EIA/TIA RS250-C Medium Haul Video Performance at 1,500 ft and beyond over Cat 5 or UTP Cable. Designed for plug-and-play installation, receiver has adjustments for Video Gain and Frequency and can be used with any brand of passive transmitter for extended distances with no compromise in video performance. Environmentally...
Read More »
Transmitter Modules fit in space-constrained locations.
Utilizing MPEG-2 compression to encode and decode video, Orion(TM) Mini-Mux VT/2 and VT/4 transmitter modules can directly insert 2 or 4 individual channels of video per module on to Orion Network. Bi-directional data and 2 contact closures can be used for voice, PTZ control, and alarm signal outputs. By equipping unit for use with second fiber, self-healing ring can be used. System includes...
Read More »
Data Transceiver transmits serial data over optical fiber.
Available in standalone or rack-mount versions, D2510WDM Series Universal Serial Data Transceiver features status-indicating LEDs, dry relay contacts, and plug-and-play design. It supports data rates to 512 kbps and transmits RS-232/422/485 serial data signal over one multimode optical fiber. With end-to-end effective range of up to 3.6 miles, product is environmentally ruggedized to meet...
Read More »
Transmitter/Receiver offer contact closure relay option.
Transmitter and Receiver Modules VT1101M and VR1100-CC can incorporate contact closure relay for alarm-event notification. Addition of relay allows device such as dome tamper switch or alarm event input to be added and its signal transmitted back to monitoring location, eliminating need for additional wiring. Modules support distances up to 2.5 miles without repeaters. Operating temperature is...
Read More »
Multiplexer transmits 8 serial data channels over one fiber.
Environmentally ruggedized to meet NEMA TS-1/TS-2 requirements, plug-and-play D8000 Series fiber optic, 8-channel, full-duplex, serial data multiplexer can transmit up to 8 serial data signals over one or two multi-mode or single-mode optical fibers. Each channel may be independently configured for RS-232, RS-422, or RS-485 with 2 or 4-wire operation with tri-state. Single-mode version supports...
Read More »
Video/Data Transmitter provides direct-to-fiber connection.
Model VT1700WDM Vicon video transmitter and data receiver mounts directly to Vicon Surveyor(TM) dome system, making camera fiber optic transmission-ready. Unit simultaneously transmits video and 1-way control data over 1 multimode optical fiber. It supports RS-422 data protocol used for pan, tilt, and zoom control. Contact-closure input allows addition of dome tamper switch or alarm event with...
Read More »
Dome Cameras offer video and data transmitter option.
Kalatel Cyberdome(TM) cameras are offered with VT1500WDM video transmitter and data receiver, which mounts directly into systems, replacing power, data, and coaxial cable connection within arm. Transmitter changes camera from coaxial connection dome to direct to fiber connection and allows for simultaneous transmission of video and one-way control data over one multimode optical fiber....
Read More »New Eastern Regional Manager for IFS Sales
NEWTOWN, Conn., March 14: International Fiber Systems part of GE and the leading manufacturer of fiber optic transmission networking equipment, has announced the hiring of Guy Walker, formerly of Optelecom/NKF, to manage the IFS Northeastern Sales Region. Guy will concentrate on supporting sales of IFS fiber optic products within the active Rep Network by educating IFS Reps and their customers of...
Read More »Managed Layer 2 Ethernet Switch features 9 optical ports.
Along with Gigabit Ethernet transmission capability, EtherNav(TM) D7608 features mechanisms to monitor, configure, and manage VLAN. Console interface, using RS-232 interface, allows for local network control from PC, while web-based GUI enables remote configuration control. Mechanically and environmentally hardened unit features up to 9 optical 10/100 FX fast Ethernet ports. It supports SNMP v2C,...
Read More »MPEG 4 Video CODEC has optical Ethernet output.
EtherNav(TM) DEV7100 Series allows single baseband NTSC video, camera control data, and audio signal to be IP-encoded and transported on 10/100 Base-T Ethernet network; output can be 10/100TX electrical, 100 FX optical, or baseband video output connection. Controlled with Symnet software, monitoring and remote PTZ control can be accessed from central monitoring station or any computer with...
Read More »
Self-Healing Ethernet Switch ensures 3-level redundancy.
When equipped in ring with 4 or more units, Series D7400WDM-RSH offers 3 levels of redundancy. In event of fiber failure, unit automatically reroutes Ethernet data to other fiber in less than 1 sec, insuring uninterrupted transmission. Switch provides point-to-point transmission of three 10/100 Mbps Ethernet data signals over one multimode or single-mode optical fiber, with fourth port operating...
Read More »
Transmitter and Receiver deliver video over UTP cable.
IFS Copperline TPT1000M and TPR1000 video transmitter and receiver deliver EIA/TIA RS250-C Medium Haul Video Performance at 1,500 ft and beyond over Cat 5 or UTP Cable. Designed for plug-and-play installation, receiver has adjustments for Video Gain and Frequency and can be used with any brand of passive transmitter for extended distances with no compromise in video performance. Environmentally...
Read More »
Transmitter Modules fit in space-constrained locations.
Utilizing MPEG-2 compression to encode and decode video, Orion(TM) Mini-Mux VT/2 and VT/4 transmitter modules can directly insert 2 or 4 individual channels of video per module on to Orion Network. Bi-directional data and 2 contact closures can be used for voice, PTZ control, and alarm signal outputs. By equipping unit for use with second fiber, self-healing ring can be used. System includes...
Read More »
Data Transceiver transmits serial data over optical fiber.
Available in standalone or rack-mount versions, D2510WDM Series Universal Serial Data Transceiver features status-indicating LEDs, dry relay contacts, and plug-and-play design. It supports data rates to 512 kbps and transmits RS-232/422/485 serial data signal over one multimode optical fiber. With end-to-end effective range of up to 3.6 miles, product is environmentally ruggedized to meet...
Read More »
Transmitter/Receiver offer contact closure relay option.
Transmitter and Receiver Modules VT1101M and VR1100-CC can incorporate contact closure relay for alarm-event notification. Addition of relay allows device such as dome tamper switch or alarm event input to be added and its signal transmitted back to monitoring location, eliminating need for additional wiring. Modules support distances up to 2.5 miles without repeaters. Operating temperature is...
Read More »
Multiplexer transmits 8 serial data channels over one fiber.
Environmentally ruggedized to meet NEMA TS-1/TS-2 requirements, plug-and-play D8000 Series fiber optic, 8-channel, full-duplex, serial data multiplexer can transmit up to 8 serial data signals over one or two multi-mode or single-mode optical fibers. Each channel may be independently configured for RS-232, RS-422, or RS-485 with 2 or 4-wire operation with tri-state. Single-mode version supports...
Read More »
Video/Data Transmitter provides direct-to-fiber connection.
Model VT1700WDM Vicon video transmitter and data receiver mounts directly to Vicon Surveyor(TM) dome system, making camera fiber optic transmission-ready. Unit simultaneously transmits video and 1-way control data over 1 multimode optical fiber. It supports RS-422 data protocol used for pan, tilt, and zoom control. Contact-closure input allows addition of dome tamper switch or alarm event with...
Read More »