Company News

Share Like Tweet Add Email

Latest New Product News from
Schroeder Industries LLC

Chemical Processing & Waste Management

Compact Fluid Sampling System offers telematics option.

February 24, 2015

Available in Manual Control and Remote Communications versions, HY-TRAX® eliminates task of locating sampling port with adequate pressure and flow. Features include VSD pump and TestMate® Particle Counter (TCM) mounted on manifold block, adjustable pump speed, and ability to operate on mineral-based hydraulic fluids up to 350 cSt. System displays ISO contamination codes and optional saturation levels and can be powered with 24 Vdc or 120 Vac. Read More

Test & Measuring Instruments, HVAC, Sensors, Monitors & Transducers

Sensor Monitoring Unit displays key contamination data.

September 23, 2014

In addition to allowing live display of TCM ISO code, TWS water concentration, and fluid temperature, SMU Sensor Monitoring Unit will store data for later retrieval. TestMate® Particle Counter, TPM, can be ordered without internal pump, which can be installed in systems with operating pressures up to 5,000 psi. Pump-less version can also be ordered with Viton® seals allowing unit to be used with Phosphate Ester Fluids. Read More

Chemical Processing & Waste Management

Tank-Mounted Return Line Filter is rated for low pressures.

July 1, 2014

Constructed with aluminum head and cap with plastic bowl to reduce weight, 100 psi GRTB features integral 25 psid bypass that is replaced every time GeoSeal® element is changed. Return line tank-mounted filtration offers space conserving solution for OEMs of mobile machinery seeking to reduce the volume dedicated to hydraulic components. Read More

Chemical Processing & Waste Management

Tank-Mounted Filter features low pressure design.

December 17, 2013

Rated at 145 psi, ART Return-Line Tank Mounted Filter offers space-saving solution for OEMs of mobile machinery seeking to minimize volume dedicated to hydraulic components. Unit features aluminum head and cap with plastic bowl. Integral 43 psid bypass is replaced every time unique element is changed. Read More

Chemical Processing & Waste Management

High Pressure Filter provides continuous operation.

September 18, 2013

With duplex design, Model PLD is suitable for turbines, gear boxes, and bearings that cannot be easily shut down to change filter element. Unit features flow rating of 100 gpm and max operating pressure of 3,000 psi. Available in 10 or 16 in. Z-Media®, filter offers 2 porting options: SAE-24 and 1.5 in. SAE 4 bolt code 61 flange. Integrated bypass valve is rated for 102 psid with indicator trip setting of 70 psid. Read More

Chemical Processing & Waste Management

Tank-Mounted Filter features all-steel design.

September 17, 2013

Featuring steel bowl with welded steel fittings, Model KFT is suited for mining, marine, and oil and gas applications where safety regulations prevent use of aluminum. Unit is available with 1–4 ports ranging in size from ½ in. NPT or SAE-8 up to 2 in. NPT or SAE-32. Offered in single length K size housing with Dirt Alarm® options, return line filter features flow rating of 100 gpm and max operating pressure of 100 psi. Read More

Chemical Processing & Waste Management

In-Line Duplex Filter handles 350 gpm at 150 SUS.

September 17, 2013

Intended for low pressure applications, Model QFD2 features Q-size elements in 16 and 39 in. lengths with all Z-Media® and water removal options. Housing offers integrated upstream and downstream test points as well as Schroeder Dirt Alarm® indicators. Integrated pressure equalization transfer valve, with 3 in. 150 lb ANSI flange, allows pressure to be transferred from one housing to another while system is operating. Standard bypass is 30 psid with optional 50 psid bypass valve available. Read More

Chemical Processing & Waste Management, Fluid & Gas Flow Equipment

Compact Filtration System cleans hydraulic fluids efficiently.

June 25, 2013

Mobile Filtration System-Basic Cart is compact, self-contained product with high-capacity elements to remove particulate and/or water contamination. Product's high capacity elements are equipped with built-in seals engaged upon bowl installation, while bar indicators identify when elements require change-out. Lightweight, dual-filter assembly also features drip pan to catch oil. Read More

Material Handling & Storage, Chemical Processing & Waste Management, Fluid & Gas Flow Equipment

Diesel Filtration Cart uses synthetic, coalescing media.

June 12, 2013

Combining KL3 particulate filter with ICF continuous coalescing filter, Bulk Diesel Filter Cart (BDFC) is designed to meet diesel cleanliness requirements of Tier IV high pressure, common rail injection diesel engines. Maneuverable 14 gpm unit, suited for kidney-loop filtration or fuel transfer, weighs just over 100 lb and measures 40 x 22.5 x 21.69 in. Particulate filter is placed upstream to clean fuel, consequently reducing coalescing element change-out to semi-annually or annually. Read More

Test & Measuring Instruments

Data Recorder concurrently evaluates up to 10 input signals.

April 24, 2013

Intended for measurement and data capture in hydraulic and pneumatic systems, Model HMG 3010 works by communicating with computer via USB port. Unit provides variety of features for displaying, evaluating, and processing measured values, including table, graph, scaling, ruler, tracker, and zoom. Keypad includes numbers and letters, as well as shift key that switches from number pad to text pad when prompted. When connected to CAN bus, recorder can measure all critical points in system at once. Read More

Sensors, Monitors & Transducers

Water Sensor prevents system failure, unnecessary interruptions.

April 24, 2013

Intended for hydraulic and lubrication fluids in industrial environments, TWS-D has integral display area that removes need to connect and mount separate display for monitoring water content of fluid. It may also be rotated along 2 axes, enabling visibility from nearly every angle. Equipped with internal switch, this water saturation and temperature sensor can be programmed directly from display and sends alarm if water saturation level exceeds limit. Read More

Fluid & Gas Flow Equipment

Bulk Diesel Filters meet Tier IV cleanliness requirements.

January 22, 2013

With respective flow rates of 16 and 32 gpm, BDF1 and BDF2 suit single-pass fuel dispensing or tank kidney loop systems on either suction or pressure side applications. Products combine KL3 particulate filter with ICF coalescing filter and are designed to meet worldwide diesel cleanliness requirements of Tier IV high pressure, common rail injection diesel engines. Proper maintenance of particulate pre-filter reduces coalescing element change-out to semi-annually or annually. Read More

Chemical Processing & Waste Management

Hydrostatic Pressure Filter features top-ported design.

December 18, 2012

Rated for cyclic applications with pressures up to 6,000 psi, HS60 utilizes full flow, reverse-flow check valve and is available with variety of bypass indicators rated at equivalent pressures. Design is optimized for space reduction upon installation and handles flows up to 100 gpm. Able to meet challenges of inline hydrostatic applications, filter features 13H size, Z-Media™ element available with high collapse (3,000 psid) center tubes. Read More

Fluid & Gas Flow Equipment, Materials & Material Processing

Pleat Filter Element reduce ESD and associated dangers.

October 23, 2012

AntiStat Pleat (ASP) Elements reduce or eliminate electrostatic discharge (ESD) problems that can occur during filtration of hydraulic and lubrication fluids. Combination of Excellement® media and ASP technology promote filtration efficiency while preventing or reducing ESD. In addition to inhibiting element damage and oil deterioration, ASP Elements decrease sludge and oil sediment as well as extend system component life. Read More

Chemical Processing & Waste Management

Fluid Quality Monitoring System is fully automatic.

October 19, 2012

Along with complete fluid quality monitoring, tracking, and reporting capability via Schroeder Asset Management software program, Asset Management Filtration Station® (AMFS) features on-board PC and controller that logs all data while system simultaneously flushes, filters, and monitors to ISO cleanliness. Data is summarized into Microsoft® Excel report tracked by equipment ID number for import into maintenance programs, and touchscreen display provides real-time graphics. Read More

Fluid & Gas Flow Equipment, Mining, Oil Drilling & Refining

Water Service Filter suits mining applications.

June 19, 2012

Rated at 300 gpm, Model WQF5 eliminates contamination in water used to make invert emulsions such as 95/5 fluids often used in underground mining applications. Unit features nickel-plated Q size housing and 40 lb bypass spring. Offered with Excellement® Z-Media(TM) ranging from 25 to 1 micron and Metal Mesh Media in 60 and 150 micron, Model WQF5 is equipped with Stainless Steel Dirt Alarms® that can define when filter is approaching bypass differential pressure. Read More

Chemical Processing & Waste Management

Top-Ported Filter withstands up to 6,000 psi.

June 19, 2012

CTF60 is 75 gpm, top-ported filter that can withstand 6,000 psi at 1 million cycles per NFPA T2.5.1-R1-2005. Elements, with 5, 8, and 14 in. sizes, are available to accommodate range of flows and are offered in Z-Media(TM) and high collapse Z-Media(TM) elements for applications requiring blocked bypass version. Housing head is available with optional inlet and outlet female test points for inline sampling. This housing includes 50 psi cracking bypass with Dirt Alarm® indicator port. Read More

Material Handling & Storage, Chemical Processing & Waste Management

Plastic Tank Package helps meet Emissions Directive.

March 20, 2012

Available in 12 and 18 gal sizes, Model TNK features integrated baffle wall, which creates settling zone for oil to de-gas and cool, allowing air to exit fluid before it enters hydraulic circuit. Basic model contains return line filter, air breather with filler strainer, suction line connection, and G ½ in. drain port, while expanded model contains return line filter, air breather with filler strainer, suction filter, 2 additional return line connections, G ½ in. drain plug, and fluid level indicator. Read More

Sensors, Monitors & Transducers

Filter Dirt Indicators help maintain fluid cleanliness.

March 20, 2012

Designed to fit standard indicator port of Schroeder return line hydraulic filters, MS17, MS18, and MS19 Electrical Dirt Alarm® Indicators alert operators as to need to change element. Crimped body design incldues Aluminum 2011-T-3 housing, and thermal lock out option can prevent false indications during cold starts. Compliant to IP67, MS17 has 4-pin Brad Harrison connector, MS18 has 2-pole AMP Junior Power Timer connector (AMP-JPT-P2), and MS19 has 2-pole Deutsch connector (DT 04-2P). Read More

Chemical Processing & Waste Management, Fluid & Gas Flow Equipment

Mobile Bulk Diesel Fuel Filters suit single-pass applications.

January 24, 2012

Bulk Diesel Cart (BDC) - mobile system comprised of QCF Coalescing Filter, QL15 Particulate Filter, Number Two Bag Housing, and 25 gpm pump - serves applications where large particulate, rust, water, and scale from bulk fuel storage tanks are of concern. Also available, Bulk Diesel Skid (BDS) is mobile system comprised of QCF Coalescing Filter and QL15 Particulate Filter mounted to cart. It can deliver clean, dry fuel at 50 gpm. Read More

Other Company News from
Schroeder Industries LLC