Safety Works, LLC
Latham, NY 12110
Share:
Infrared Detector monitors multiple gases.
Hand-held Orion Plus IR Detector utilizes over 20 different sensors, including chemical, catalytic, and IR types. Functioning as personal monitor and pre-entry check device, unit detects combustible gases in atmospheric and inert applications. Backlit graphic display shows all gas readings at a glance, while text messages, LEDs, and audible alarm serve as additional alerts. Electrical Perma-Check...
Read More »
Refrigerant Monitor detects R 410A and R 407C.
Utilizing photoacoustic infrared sensing technology, Chillgard-® RT is capable of detecting 60+ refrigerants. It monitors down to 1 ppm over 0 - 1,000 ppm range and includes up to 8 detection points, 2 line x 20 character display, and 4-button membrane keypad. Monitor provides local audible/visible indication of refrigerant gas presence caused by leaks or spills and supports 8, 16, or, 24 relays...
Read More »
Gas Monitors offer 0-1,000 ppm ammonia sensor.
Ultima XE and XA provide continuous monitoring using electrochemical technology. Both incorporate ammonia sensor with 0-1,000 ppm monitoring range and 10 ppm resolution. Ultima XE Monitors have 316 stainless steel enclosure, while Ultima XA Monitors have NEMA 4 rated plastic enclosures. Offerings include interchangeable smart sensors, display that alternates between sensor reading and gas type,...
Read More »
Refrigerant Monitors meet ASHRAE 15-2001 signaling requirements.
ChillgardÃ-® LS Photoacoustic Infrared Monitor, available in single-point diffusion and 4-point pumped models, can detect R11, R12, R22, R123, and R134A. Chillgard LC Control Module works with LS gas sensor modules to provide remote signaling and control and can communicate with up to 8 sample points over RS-485 line. Chillgard LE Monitor combines monitor and control in one enclosure, and is...
Read More »
Refrigeration Control Module features optional transformer.
Chillgard LC Control Module, with transformer option, enables unit to power up to 6 remote Chillgard LS Photoacoustic Infrared Refrigerant Monitor sensors. Standard powering uses 24 Vac/dc. Unit works with Chillgard LS Refrigerant Monitor gas sensor modules to provide remote signaling and control capability in refrigerant monitoring applications. It communicates with up to 8 sample points from...
Read More »
Caps protect wearers from minor bumps.
Bump Caps protect scalp by reducing exposure to abrasions and lacerations caused by bumps to the head. High-density polyethylene cap has perforated sides for cross air ventilation, and comes in 6 colors. SofCap(TM) Hat is a 100% cotton baseball-type cap with eyelet holes. Plastic liner helps protect against scrapes to scalp, while inner foam pad offers additional comfort.
Read More »
Hard Hat incorporates cooling vents.
V-GardÃ-® Advance(TM) Cap has 6 cooling vents along crown for air circulation and user comfort. Additional offerings include 4- or 6-point Fas-TracÃ-® ratchet suspension and rain gutter. Lateral contours above ear offer capability to integrate hearing protection, while Glaregard(TM) underbrim reduces reflective glare. Available in 7 colors, hat includes absorbent sweatband and...
Read More »
Gas Detector is available with peak reading capability.
Portable PULSAR Single-Gas Detector can be worn inside or outside pocket, or on belt or helmet. It has triple alarm system, with audio, vibrating and visual alarms, and is able to display highest gas concentration to which it has been exposed. Detector is available in 3 versions for detecting CO, H2S or O2. With maintenance-free, 24-month service life, it requires no calibration adjustment and no...
Read More »
Gas Monitors have audible alarms and horns.
Using microprocessor-based technology, Gasgard units monitor toxic gases, combustible gases and oxygen deficiency. They offer 4 levels of alarm, each with LED indicator and relay output. Fault alarm and individual digital display is provided for each channel. Gasgard Monitors are designed to work with any 2- or 3-wire 4-20 mA input signal. Selectable measuring ranges include PPM, % LEL and %...
Read More »
Gas Monitor provides photoacoustic infrared sensing.
Chemgard Infrared Gas Monitor, with monitoring ranges as low as 0-10 ppm to as much as 100% by volume for select gases, is suited for gas monitoring in petrochemical industry. Unit is available in NEMA 4 wall mount, 19 in. rack-mount, or explosion-proof enclosure, all with 4 front-panel button controls. Each version can monitor from 1 to 8 sample point locations and provides 3 levels of alarm...
Read More »
Infrared Detector monitors multiple gases.
Hand-held Orion Plus IR Detector utilizes over 20 different sensors, including chemical, catalytic, and IR types. Functioning as personal monitor and pre-entry check device, unit detects combustible gases in atmospheric and inert applications. Backlit graphic display shows all gas readings at a glance, while text messages, LEDs, and audible alarm serve as additional alerts. Electrical Perma-Check...
Read More »
Refrigerant Monitor detects R 410A and R 407C.
Utilizing photoacoustic infrared sensing technology, Chillgard-® RT is capable of detecting 60+ refrigerants. It monitors down to 1 ppm over 0 - 1,000 ppm range and includes up to 8 detection points, 2 line x 20 character display, and 4-button membrane keypad. Monitor provides local audible/visible indication of refrigerant gas presence caused by leaks or spills and supports 8, 16, or, 24 relays...
Read More »
Gas Monitors offer 0-1,000 ppm ammonia sensor.
Ultima XE and XA provide continuous monitoring using electrochemical technology. Both incorporate ammonia sensor with 0-1,000 ppm monitoring range and 10 ppm resolution. Ultima XE Monitors have 316 stainless steel enclosure, while Ultima XA Monitors have NEMA 4 rated plastic enclosures. Offerings include interchangeable smart sensors, display that alternates between sensor reading and gas type,...
Read More »
Refrigerant Monitors meet ASHRAE 15-2001 signaling requirements.
ChillgardÃ-® LS Photoacoustic Infrared Monitor, available in single-point diffusion and 4-point pumped models, can detect R11, R12, R22, R123, and R134A. Chillgard LC Control Module works with LS gas sensor modules to provide remote signaling and control and can communicate with up to 8 sample points over RS-485 line. Chillgard LE Monitor combines monitor and control in one enclosure, and is...
Read More »
Refrigeration Control Module features optional transformer.
Chillgard LC Control Module, with transformer option, enables unit to power up to 6 remote Chillgard LS Photoacoustic Infrared Refrigerant Monitor sensors. Standard powering uses 24 Vac/dc. Unit works with Chillgard LS Refrigerant Monitor gas sensor modules to provide remote signaling and control capability in refrigerant monitoring applications. It communicates with up to 8 sample points from...
Read More »
Caps protect wearers from minor bumps.
Bump Caps protect scalp by reducing exposure to abrasions and lacerations caused by bumps to the head. High-density polyethylene cap has perforated sides for cross air ventilation, and comes in 6 colors. SofCap(TM) Hat is a 100% cotton baseball-type cap with eyelet holes. Plastic liner helps protect against scrapes to scalp, while inner foam pad offers additional comfort.
Read More »
Hard Hat incorporates cooling vents.
V-GardÃ-® Advance(TM) Cap has 6 cooling vents along crown for air circulation and user comfort. Additional offerings include 4- or 6-point Fas-TracÃ-® ratchet suspension and rain gutter. Lateral contours above ear offer capability to integrate hearing protection, while Glaregard(TM) underbrim reduces reflective glare. Available in 7 colors, hat includes absorbent sweatband and...
Read More »
Gas Detector is available with peak reading capability.
Portable PULSAR Single-Gas Detector can be worn inside or outside pocket, or on belt or helmet. It has triple alarm system, with audio, vibrating and visual alarms, and is able to display highest gas concentration to which it has been exposed. Detector is available in 3 versions for detecting CO, H2S or O2. With maintenance-free, 24-month service life, it requires no calibration adjustment and no...
Read More »
Gas Monitors have audible alarms and horns.
Using microprocessor-based technology, Gasgard units monitor toxic gases, combustible gases and oxygen deficiency. They offer 4 levels of alarm, each with LED indicator and relay output. Fault alarm and individual digital display is provided for each channel. Gasgard Monitors are designed to work with any 2- or 3-wire 4-20 mA input signal. Selectable measuring ranges include PPM, % LEL and %...
Read More »
Gas Monitor provides photoacoustic infrared sensing.
Chemgard Infrared Gas Monitor, with monitoring ranges as low as 0-10 ppm to as much as 100% by volume for select gases, is suited for gas monitoring in petrochemical industry. Unit is available in NEMA 4 wall mount, 19 in. rack-mount, or explosion-proof enclosure, all with 4 front-panel button controls. Each version can monitor from 1 to 8 sample point locations and provides 3 levels of alarm...
Read More »